Easy-Laser

Sort By:  
Easy-Laser E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​
$1,450.00
With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
$6,200.00
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
$5,970.00
The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas. The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
$3,890.00
With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
$3,250.00
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
$3,100.00
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
$2,990.00
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
$2,340.00
Easy-Laser E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​
$2,260.00
Easy-Laser E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
$1,250.00
Used Easy-Laser E710 Laser Alignment System - Sale !! (E710)

Easy-Laser E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​

Programs for horizontal machines, soft foot checks, machine trains, vertical/flange mounted and cardan/offset mounted machines are included. Furthermore programs for straightness, flatness/twist and parallelism measurement are included. Using accessories you can also align sheaves/pulleys with digital precision and check vibration levels. Large, clear colour screen, wireless measuring units (included as standard), long operating life and robust design give a measurement system that is both reliable and easy to use.

Easy to use = fast and efficient

When we talk about simplicity we mean several things, for example, simple to place or mount the measurement equipment on the measurement object, easy to perform the measurement and easy to interpret the measurement result. With Easy-Laser® E710 you can measure all types of rotating machinery, large and small, equally well, regardless of shaft diameter. 

Wireless measuring units (laser/detector) enable you to work more freely. The measurement values can be registered with only 40° rotation of the shafts. You can then align it ”live” using the measuring units in any position around the shaft. The programs guide you step-by-step through the measuring procedure for the perfect measuring result.

Include  :

1 Measuring unit M  
1 Measuring unit S 
1 Display unit
2 BT wireless units
2 Cables 2 m
2 Shaft brackets with chains 
2 Extension chains
2 Magnet bases
2 Offset brackets
4 Rods 120 mm  [4.72”]
4 Rods 60 mm  [2.36”]
1 Measuring tape 3 m  [9.8’]
1 Manual
1 Quick manual
1 USB memory stick with EasyLink™ software
1 USB cable
1 Charger (100–240 V AC)
1 Toolbox
1 Shoulder strap for display unit
1 Optical cleaning cloth 
1 Carrying case



Easy-Laser E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​
$1,450.00
New Easy-Laser XT770 - Laser Alignment System - Sale !! (XT770)

With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.

With the XT770 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Dynamic measurement
The EasyTrend program, part of the XT Alignment app, allows you to keep track of machine movement over time. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately. Read more about dynamic measurement.

Geometric measurements kit
With XT770 GEO you will be able to take flatness and straightness measurements according to established standards like ISO and ANSI. The kit includes the versatile laser transmitter XT20 or XT22 plus a magnet base with rotatable head for geo measurements.

Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit. 

Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.

Display unit XT12
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features
Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

Measuring units XT70-M / XT70-S
The XT70 measuring units utilize dot-type laser and 2-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

A complete system contains

Include:​

1 Measuring unit XT70-M
1 Measuring unit XT70-S
2 Shaft brackets with chains and rods 120 mm [4.72"]
4 Rods 60 mm [2.36"]
4 Rods 120 mm [4.72"]
2 Magnet bases
2 Offset brackets
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder
1 Carrying case Large
Optional:

XT12 Display unit, with or without IR camera
XT770 GEO also includes:

1 Laser transmitter XT20 or XT22
1 Magnet base with turnable head (replaces one of the regular magnet bases)
1 Multi-bracket for XT20/XT22
4 Rods 120 mm [4.72"]

DISPLAY UNIT

NameXT11
Type of display/sizeVGA 8” colour screen, backlit LED, multitouch
Internal battery (fixed)Heavy duty Li Ion chargeable
ConnectionsUSB A, USB B, Charger, AV
Operating temperature-10–50 °C
Storage temperature-20–50 °C
CommunicationWireless technology, WiFi
Relative humidity10–95%
OLED display96×96 pixels
Camera13 Mp, with diode lamp
IR camera (optional)FLIR LEPTON® (0–450 °C, 32–842 °F)
Help functionsBuilt-in manual
Environmental protectionIP class 66 and 67
Housing materialPC/ABS TPE
DimensionsWxHxD: 274x190x44 mm [10.8×7.5×1.7”]
Weight (without batteries)1450 g [51.1 oz]
Operating timeUp to 16 h continuously

 

MEASURING UNITS

NameXT70-M / XT70-S
CommunicationBT wireless technology
Type of detector2 axis TruePSD 20×20 mm [0.79×0.79″]
Resolution0.001 mm [0.05 mils]
Measurement accuracy±1µm ±1%
Measurement rangeUp to 20 m [66 feet]
Type of laserDiode laser
Laser wavelength635–670 nm
Laser classSafety class 2
Laser output<1 mW
Electronic inclinometer0.1° resolution
Environmental protectionIP class 66 and 67
Operating temperature-10–50 °C
Storage temperature-20–50 °C
Relative humidity10–95%
Housing materialAnodized aluminium PC/ABS TPE
DimensionsWxHxD: 76×76.7×45.9 mm [3.0×3.0x1.8″]
Weight272 g [9.6 oz]
OLED display128×64 pixels
Operating time

Up to 24 h continuously

With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
$6,200.00
New Easy-Laser XT660 - Laser Alignment System - Sale !! (XT660)
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.

With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.

The XT products are rugged, rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.

User-friendly
Use the rugged Easy-Laser XT display unit, or install the free XT Alignment app on your iOS or Android device. The intuitive user interface guides you through the measurement process. Click here for list of compatible devices

Unique documentation possibilities 
The XT display unit has a 13MP camera. You can also get the XT display unit with a built-in IR camera. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.

System Parts :

Display unit XT12

Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen

A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features

  • Robust, rubber coated design, IP66/67.
  • Large 8” glove enabled touch-screen.
  • IR Camera for thermal images (optional).
  • 16 hours operating time.

Measuring units XT60-M / XT60-S
The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
Slideable target
24 hours operating time

A complete system contains

include:​

1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder
Optional:

XT12 Display unit, with or without IR camera
XT660 also includes, depending on system:​
1 Carrying case Medium
or​
1 Carrying case Large

Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously
Measuring Units
Name
XT60-M / XT60-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x45.9 mm [3.0x3.0x1.8"]
Weight
272 g [9.6 oz]
OLED display
128x64 pixels
Operating time
Up to 24 h continuously



The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
$5,970.00
New Easy-Laser XT550 Ex/ATEX Laser Alignment System - Sale !! (XT550 Ex/ATEX)
The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas. 

The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.

Choose your own display unit
System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own XT display unit. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.

Note. For use in Ex-classed areas, the mobile device you’re using must be approved for these areas. Always check for approval labels before entering potentially explosive areas. The XT display unit is not Ex/ATEX approved.

*The XT50 measuring units are ATEX approved which means means they comply with the Essential Health and Safety Requirements relating to the design of products intended for use in potentially explosive atmospheres.

Display unit ecom Tab-Ex
Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.

Features
Glove-enabled touch-screen
Large 8" display
ATEX approved

Measuring units XT50-M / XT50-S
The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features
Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.

A complete system contains
1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Rods 120 mm [4.72"]
2 Extension chains 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Rod tool
1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX


SPECS : 

Display Unit
Name
ecom Tab-Ex® 3
Type of display/size
TFT 8" colour screen
Operating temperature
-20–55 °C
Communication
Bluetooth® 5.0 Wireless technology, WiFi
Camera
13 Mp with flash (rear), 5 Mp (front)
Dimensions
WxHxD: 263x162x26 mm [10.3x6.4x1.0"]
Weight (without batteries)
1100 g [2.42 lbs]
Operating time
Up to 11 h continuously
Operating system
Android™
ATEX/UKCA Ex classification
II 2G Ex db ia IIC T6 Gb IP64
II 2D Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55 °C
IECEx classification
Ex db ia IIC T6 Gb IP64
Ex ia tb IIIC T80°C Db
-20°C ≤ Ta ≤ 55°C
Ex certificate number
EPS 22 ATEX 1055X, IECEx EPS 22.0014X, EPS 22 UKEX 1055X

Measuring Units
Name
XT50-M / XT50-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20x20 mm [0.79x0.79"]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.5x50.9 mm [3.0x3.0x2.0"]
Weight
316 g [11.1 oz]
OLED display
128x64 pixels
Operating time
Up to 20 h continuously
Ex classification
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ 50°C
Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X
The XT550 alignment system has all the features of the XT660 with one major difference – the measuring units are intrinsically safe, which allows the system to be used in potentially hazardous areas. The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
$3,890.00
Used Easy-Laser XT770 - Laser Alignment System - Sale !! (XT770)
With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.

2 axis PSDs (position-sensitive detectors) permits adjustment of your machine both vertically and horizontally at the same time, with measuring units in any position. We call it 360° Live adjustment.

With the XT770 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result. Read more about the different measurement methods under the Features tab.

Dynamic measurement
The EasyTrend program, part of the XT Alignment app, allows you to keep track of machine movement over time. This is useful when checking for thermal expansion and pipe strain issues for example. This type of measurement requires special DM brackets which can be ordered separately. Read more about dynamic measurement.

Geometric measurements kit
With XT770 GEO you will be able to take flatness and straightness measurements according to established standards like ISO and ANSI. The kit includes the versatile laser transmitter XT20 or XT22 plus a magnet base with rotatable head for geo measurements.

Use with any device
As all other XT systems, the XT770 can be used with the display unit of your choice. The XT Alignment app can be run on virtually any iOS or Android device*, or the Easy-Laser XT display unit. 

Unique documentation possibilities
The XT display unit has a 13MP camera, and you can also get the it with a built-in IR camera as an option. This means you can add a thermal image of the machine before and after alignment. In the app you can easily create and share a PDF report containing all measurement data and images.

This system includes:

  • 1 Measuring unit XT70-M IP66/67, 66ft measurement range, up to 24 hour operating time
  • 1 Measuring unit XT70-S IP66/67, 66ft measurement range, up to 24 hour operating time
  • 2 Shaft brackets with chains and rods 120 mm [4.72″]
  • 2 12-1147 magnetic shaft brackets
  • 4 Rods 60 mm [2.36″]
  • 4 Rods 120 mm [4.72″]
  • 2 Magnet bases
  • 2 Offset brackets
  • 2 Extension chain 900 mm [35.4″]
  • 1 Measuring tape 3 m [9.8′]
  • 1 Hexagon wrench set
  • 1 Charger (100–240 V AC)
  • 1 DC split cable for charging
  • 1 DC to USB adapter, for charging
  • 1 Quick reference manual
  • 1 Cleaning cloth for optics
  • 1 USB memory with manuals
  • 1 Documentation folder
  • 1 Carrying case Large
With Easy-Laser XT770 you can perform shaft alignment of horizontally and vertically/flange mounted machines, and align machine trains with an unlimited number of machines. You can also measure twist of foundation, soft foot, bearing clearance, and more.
$3,250.00
New Easy-Laser XT440 Laser Alignment System - Sale !! (XT440)

With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​

Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.

The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs. 

Unique documentation possibilities 
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.

Smart functions
 
Measurement value filter
 
Result table
 
Multiple sets of feet
 
Thermal growth compensation
 
Tolerance check
 
Wide live adjustment
 
Select machine image
 
Mirror machine image
 
Read QR and bar codes
 
Templates
 
Locked feet
 
Select coupling type
 
Continue session
 
Sign reports electronically
 
Built-in manual
 
Multiple languages
 
AV connector

Display unit XT12
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Features

Robust, rubber coated design, IP66/67.
Large 8” glove enabled touch-screen.
IR Camera for thermal images (optional).
16 hours operating time.

Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process. 

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features

Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
24 hours operating time

A complete system contains :

1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m  [9.8’] 
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

SPECS : 

Display Unit
Name
XT12
Type of display/size
8" LCD capacitive multi-touch colour display
Internal battery (fixed)
Heavy duty Li Ion chargeable
Connections
USB A, USB C, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Communication
Wireless technology, WiFi
Relative humidity
10–95%
Loundspeakers
Built-in, rear-facing
Charger
15 V
Camera
13 Mp autofocus, with LED diode
IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)
Housing material
PC/TPE or PC/TPU
Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]
Weight (without batteries)
1400 g [49.4 oz]
Operating time
Up to 16 h continuously

Measuring Units
Name
XT40-M / XT40-S
Communication
BT wireless technology
Type of detector
TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%
Measurement range
Up to10 m [33 feet]
Type of laser
Diode laser
Laser wavelength
630–680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Internal battery
Heavy duty Li Ion chargeable
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium PC/ABS TPE
Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
Weight
245 g [8.6 oz]
OLED display
128x64 pixels
Operating time
>24 h continuously

Also you can check product : Used Easy-Laser E910 Flange Laser Alignment System - Sale !!

With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
$3,100.00
Used Easy-Laser XT660 - Laser Alignment System - Sale !! (XT660)
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.

With the XT660 you have a choice of several different measurement methods, e.g. continuous sweep and multipoint. This gives you the flexibility you need to achieve the perfect measurement result.

The XT products are rugged, rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the tougher jobs.

User-friendly
Use the rugged Easy-Laser XT display unit, or install the free XT Alignment app on your iOS or Android device. The intuitive user interface guides you through the measurement process. 

Unique documentation possibilities 
The XT display unit has a 13MP camera. You can also get the XT display unit with a built-in IR camera. This means you can add a thermal image of the machine before and after alignment. You can easily create and share a PDF report containing all measurement data and images.

include:​

1 Measuring unit XT60-M
1 Measuring unit XT60-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36"]
2 Extension chain 900 mm [35.4"]
1 Measuring tape 3 m [9.8']
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Documentation folder

Optional:

XT12 Display unit, with or without IR camera
XT660 also includes, depending on system:​
1 Carrying case Medium
or​
1 Carrying case Large
The XT660 measuring units utilize dot laser technology. This makes it possible to measure larger machines and longer spans than line laser systems. It also provides higher accuracy when backlash in the coupling is present. In addition, dot laser allows you to check more things when installing a machine, e.g. twist of foundation and bearing clearance.
$2,990.00
Used Easy-Laser XT440 Laser Alignment System - Sale !! (XT440)
With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​

Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device*. Whatever you choose, the intuitive user interface is the same across all platforms.

The measuring units and XT display unit are shockproof and rated both IP66 and IP67 water and dust proof. Along with long operating times, this guarantees you will be able to take on and finish even the toughest jobs. 

Unique documentation possibilities 
From the app, you can easily create and share a PDF report containing all measurement data and images. If you use the XT display unit it has a built-in 13MP camera. The XT display unit can also be equipped with an IR camera which allows you to add a thermal image of the machine before and after alignment.

Smart functions
 
Measurement value filter
 
Result table
 
Multiple sets of feet
 
Thermal growth compensation
 
Tolerance check
 
Wide live adjustment
 
Select machine image
 
Mirror machine image
 
Read QR and bar codes
 
Templates
 
Locked feet
 
Select coupling type
 
Continue session
 
Sign reports electronically
 
Built-in manual
 
Multiple languages
 
AV connector

Display unit XT12
Rugged, robust, industrial grade tablet with wear resistant rubberized protective coating. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in, but you can also choose a model with IR camera added.

Glove enabled touch-screen
A large 8", glove-enabled touch-screen makes the information clear and the app easy to use. You can check battery status also when the unit is turned off .
Heavy-duty rechargeable battery for very long operatong times; up to 16 hours. Fastening points for shoulder strap (included).

Measuring units XT40-M / XT40-S
The XT40 measuring units have large 30 mm PSD [1.2”], and a state-of-the-art OLED display which shows the angle of the unit, making it easier to position it on the shaft. The line laser technology provides a fast setup and measurement process. 

Rigid and rugged
The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features

Built-in wireless technology. Integrated rechargeable battery. 
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
OLED display shows the angle of the unit 
24 hours operating time

SPECS : 

Display Unit
Name
XT12

Type of display/size
8" LCD capacitive multi-touch colour display

Internal battery (fixed)
Heavy duty Li Ion chargeable

Connections
USB A, USB C, Charger, AV

Operating temperature
-10–50 °C

Storage temperature
-20–50 °C

Communication
Wireless technology, WiFi

Relative humidity
10–95%

Loundspeakers
Built-in, rear-facing

Charger
15 V

Camera
13 Mp autofocus, with LED diode

IR camera (optional)
FLIR LEPTON® (0–400 °C, 32–752 °F)

Help functions
Built-in manual

Environmental protection
IP class 66 and 67. Designed for outdoor use (pollution degree 4)

Housing material
PC/TPE or PC/TPU

Dimensions
WxHxD: 269.0x190.0x49.4 mm [10.59x7.48x1.95"]

Weight (without batteries)
1400 g [49.4 oz]

Operating time
Up to 16 h continuously

Measuring Units
Name

XT40-M / XT40-S
Communication

BT wireless technology
Type of detector

TruePSD 30 mm [1.2”]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±5µm ±1%

Measurement range
Up to10 m [33 feet]

Type of laser
Diode laser

Laser wavelength
630–680 nm

Laser class
Safety class 2

Laser output
<1 mW

Electronic inclinometer
0.1° resolution

Environmental protection
IP class 66 and 67

Operating temperature
-10–50 °C

Internal battery
Heavy duty Li Ion chargeable

Storage temperature
-20–50 °C

Relative humidity
10–95%

Housing material
Anodized aluminium PC/ABS TPE

Dimensions
WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]

Weight
245 g [8.6 oz]

OLED display
128x64 pixels

Operating time
>24 h continuously

Included :

1 Measuring unit XT40-M
1 Measuring unit XT40-S
2 Shaft brackets with chains and rods
4 Rods 75 mm [2.95”]
1 Measuring tape 3 m  [9.8’] 
1 Hexagon wrench set
1 Charger (100–240 V AC)
1 DC split cable for charging
1 DC to USB adapter, for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Medium

Optional:
XT12 Display unit, with or without IR camera

Also you can check product : New Easy-Laser XT440 Laser Alignment System - Sale !!


With Easy-Laser XT440 you can perform all necessary steps of shaft alignment on horizontal and vertically/flange mounted machines. The user-friendly software guides you step by step through the measurement process. ​Use the system together with the rugged Easy-Laser XT display unit or install the free XT Alignment app on your iOS or Android device. Whatever you choose, the intuitive user interface is the same across all platforms.
$2,340.00
New Easy-Laser E710 Laser Alignment System - Sale !! (E710)
Easy-Laser® E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​

Programs for horizontal machines, soft foot checks, machine trains, vertical/flange mounted and cardan/offset mounted machines are included. Furthermore programs for straightness, flatness/twist and parallelism measurement are included. Using accessories you can also align sheaves/pulleys with digital precision and check vibration levels. Large, clear colour screen, wireless measuring units (included as standard), long operating life and robust design give a measurement system that is both reliable and easy to use.

Easy to use = fast and efficient
When we talk about simplicity we mean several things, for example, simple to place or mount the measurement equipment on the measurement object, easy to perform the measurement and easy to interpret the measurement result. With Easy-Laser® E710 you can measure all types of rotating machinery, large and small, equally well, regardless of shaft diameter. 

Wireless measuring units (laser/detector) enable you to work more freely. The measurement values can be registered with only 40° rotation of the shafts. You can then align it ”live” using the measuring units in any position around the shaft. The programs guide you step-by-step through the measuring procedure for the perfect measuring result.

Smart functions
 
Measurement value filter
 
Result table
 
Live-any-angle
 
Reference foot locking
 
Multiple sets of feet
 
Thermal growth compensation
 
Tolerance check
 
Swap view function
 
Select machine image
 
Templates

Display unit E51

The display unit for the E series enables you to work more efficiently and for longer than ever before thanks to several innovative solutions. It is also ergonomically designed with easy-to-grip rubber cladding and robust construction.

Ergonomic design

The display unit has a thin, easy-to-grip and rubber coated profile that ensures a secure grip. It has large well-spaced buttons that give clear feedback when pushed. In addition, the two Enter buttons make the system suitable for both right and left-handed users. The display screen has clear graphics that guide you through the measurement process.

Personal settings

You can create a user profile where you can save your personal settings. You can also have different settings for different types of measurements. It makes work faster!

Language selection

You can choose the language that you want to appear on screen. English, German, French, Spanish, Portuguese, Swedish, Finnish, Russian, Polish, Dutch, Italian, Japanese, Korean and Chinese are available. 

Upgrading

If you wish to expand functionality in the future, the software in the display unit can be upgraded via the internet or by connecting a USB memory containing the new software. In this way you will also have access to the measurement programmes that we develop for new purposes in the future.

Measuring units ES / EM

The measuring units have large 20 mm [0.78” sq] detector surfaces (PSD for the greatest accuracy) which allows the possibility of measuring at a distance of up to 20 metres[66 feet]. The substantial and rigid design of aluminium and stainless steel guarantees stable measurement values and reliable alignment with the greatest precision in even the toughest of environments. The measuring units are also water and dust proof to classes IP66 and IP67. Connect to the display unit via cable or wirelessly. Both cable and wireless units are connected quickly using Push/Pull connections, no screwing required.

Inclinometers in both units

With electronic inclinometers in both measuring units the system knows exactly how they are positioned. This also makes it very easy to align uncoupled shafts.

Electronic targets

Thanks to the two axis detectors you have access to electronic targets, that is you can see on the screen where the laser beams hit.

Flexible mounting options

The thinking behind the rigid and compact design, is that it will simplify positioning and provide varying installation methods. You can measure all types of rotating machine, large and small, equally well, regardless of shaft diameter. The units also have two extra screw holes for additional mounting options.

Two lasers, two PSDs

The so called reversed measurement method with two laser beams and two PSDs makes it possible to also measure very incorrectly set machines. This is particularly good for new installations, where the machines are not yet in the correct position.

A complete system contains
1 Measuring unit M  
1 Measuring unit S 
1 Display unit
2 BT wireless units
2 Cables 2 m
2 Shaft brackets with chains 
2 Extension chains
2 Magnet bases
2 Offset brackets
4 Rods 120 mm  [4.72”]
4 Rods 60 mm  [2.36”]
1 Measuring tape 3 m  [9.8’]
1 Manual
1 Quick manual
1 USB memory stick with EasyLink™ software
1 USB cable
1 Charger (100–240 V AC)
1 Toolbox
1 Shoulder strap for display unit
1 Optical cleaning cloth 
1 Carrying case

SPECS : 

Display Unit
Name
E51
Part No.
12-0418
Type of display/size
VGA 5.7” colour screen, backlit LED
Displayed resolution
0.001 mm / 0.05 thou
Internal battery (fixed)
Heavy duty Li Ion chargeable
Battery compartment
For 4 x R14 (C)
Connections
USB A, USB B, Easy-Laser® units, Charger
Operating temperature
-10–50 °C
Communication
BT wireless technology
Internal memory
>100 000 measurements can be saved
Help functions
Calculator, Unit converter
Environmental protection
IP class 65
Housing material
PC/ABS TPE
Dimensions
WxHxD: 250x175x63 mm [9.8”x6.9”x2.5”]
Weight (without batteries)
1080 g [2.4 lbs]

Measuring Units
Name
EM / ES
Part No.
12-0434 / 12-0433
Communication
Wireless unit 12-0436 (separate item)
Cable connection
Easy-Laser® "red cable"
Type of detector
2-axis PSD 20x20 mm [0.78" sq]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66']
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Thermal sensors
± 1° C accuracy
Environmental protection
IP class 66 and 67
Temparature Range
-10–50 °C
Internal battery
Li Po
Housing material
Anodized aluminium/ABS plastics
Dimensions
WxHxD: 60x60x42 mm [2.36x2.36x1.65"]
Weight
202 g [7.1 oz]



Easy-Laser E710 is an alignment system that is complete in its full meaning. It does not just give you all the functions for shaft alignment, it also gives the opportunity to check the machine base and any bearing play using the standard equipment.​
$2,260.00
Used Easy-Laser E910 Flange Laser Alignment System - Sale !! (E910 Flange)
Specifications:

Display Unit

Name:E51
Part No.:12-0418
Type of display/size:VGA 5.7” colour screen, backlit LED
Displayed resolution:0.001 mm / 0.05 thou
Power management:Endurio™ system for unbroken power supply
Internal battery (fixed):Heavy duty Li Ion chargeable
Battery compartment:For 4 x R14 (C)
Connections:USB A, USB B, Easy-Laser® units, Charger
Operating temperature:-10–50 °C
Communication:BT wireless technology
Internal memory:>100 000 measurements can be saved
Help functions:Calculator, Unit converter
Environmental protection:IP class 65
Housing material:PC/ABS TPE
Dimensions:WxHxD: 250x175x63 mm [9.8”x6.9”x2.5”]
Weight (without batteries):1080 g [2.4 lbs]

Laser Transmitter

Name:D22
Part No.:12-0022
Type of laser:Diode laser
Laser wavelength:630–680 nm, visible red light
Laser Safety Class:Class 2
Adjustable modulation:5, 32 KHz
Output:< 1 mW
Beam diameter:6 mm [1/4”] at aperture
Working area, range:40-metre radius [130´]
Type of battery:1 x R14 (C)
Operating time/battery:approx. 24 hours
Levelling range:± 30 mm/m [± 1.7°]
3 x spirit vials’ scaling:0.02 mm/m
Squareness between laser beams:0.01 mm/m [2 arc sec.]
Flatness of sweep:0.02 mm/m
Fine turning:0.1 mm/m [20 arc sec.]
2 x spirit vials for rotation:5 mm/m
Housing material:Anodized aluminium
Dimensions:WxHxD: 139x169x139 mm [5.47”x6.64”x5.47”]
Weight:2650 g [5.8 lbs]

Detectors

Name:E7
Part No.:12-0752
Communication:Wireless unit 12-0436 (separate item) or cable
Type of detector:2 axis PSD 20x20 mm [0.78" sq]
Resolution:0.001 mm [0.05 mils]
Measurement accuracy:±1µm ±1%
Inclinometers:0.1° resolution
Thermal sensor:± 1° C accuracy
Environmental protection:IP Class 66 and 67
Internal battery:Li Ion
Operating temperature:-10–50 °C
Protection:No influence from ambient light
Housing material:Anodized aluminium, Plastics
Dimensions:WxHxD: 60x60x42 mm [2.36x2.36x1.65”]
Weight:186 g [6.6 oz]
Easy-Laser E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
$1,250.00
Per Page      1 - 10 of 10
  • 1