Flaw Detector

Flaw detection is the process of identifying and sizing sub-surface defects in materials. One of the most common techniques to identify defects is ultrasonic inspection where sound waves, propagated through the material, are used to identify such anomalies. The high frequency sound behaves predictably when interacting with surfaces and internal defects.

Flaw detection can be applied in almost any industry from composites and metals used in aerospace, to petrochemical oil and gas pipelines and storage tanks, to power generation including nuclear power. The most common anomalies detected include cracks, voids and porosity in metals, ceramics and plastics in addition to delaminations and disbonds in composites.

Sort By:  
The result of over 10 years of proven leadership in modular NDT test platforms, the OmniScan MX has been the most successful portable and modular phased array test instrument produced by Olympus to date, with thousands of units in use throughout the world.
$11,190.00
The Waygate Technologies Krautkramer Mentor UT, a Baker Hughes business product (formerly GE Inspection Technologies), is a powerful, connected ultrasonic flaw detector optimized for corrosion and erosion mapping of process vessels, pipes, and tanks. The Mentor UT brings the power of array inspection to everyday use with an intiuitive, touch-screen interface, and customizable inspection applications ("apps"). Users can create their own apps or use the preinstalled apps and completely customize the user interface to meet their needs. The device setup and calibration are simple to learn and can save in training costs while upping productivity.
$7,500.00
Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.
$4,300.00
The Zetec TOPAZ64 is a fully integrated, portable, 64 channel Phased Array Ultrasonic Testing instrument which enables you to complete faster and more accurate inspections. The Topaz 64 is ideal for use in the Oil & Gas, Power Generation, Manufacturing, and Transportation industries. This instrument features 64 active channels for fast and accurate inspections in welds, complex components, and corrosion mapping. The Topaz 64 is also suited to encoded or manual inspections.
$10,500.00
The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.
$2,570.00
The WAVE interactive scan plan has been developed to ease diagnostics on the inspected part. The scan plan can reproduce complex geometries such a Curved parts and T-joints. Combined with a real-time Raytracer, this unique feature facilitates the distinction between a real flaw and a geometrical indication. Thus avoiding unnecessary repair.
$2,400.00
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
$2,250.00
Housed in the field-proven rugged and portable OmniScan X3 enclosure, the OmniScan X3 64 flaw detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.
$13,200.00
The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.
$1,750.00
The EPOCH 600 is mid-level, handheld ultrasonic flaw detector. Weighing only 1.68 kg (3.72 lb.), its horizontal case is built to withstand the rigors of very harsh environments. EN12668-1 plus features such as 400 V PerfectSquare tunable square wave pulser, digital filtering for enhanced signal-to-noise ratio.
$1,500.00
The USM 36 Ultrasonic Flaw Detector is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate Waygate's patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. Another feature included is the 7" screen that makes viewing A-Scans efficient, with signals being easily viewed even in bright sunlight as well as flexible data storage with removable SD cards or USB ports.
$1,320.00
Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
$1,650.00
Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
$1,200.00
Synchronics Provides Expert Electronic Repairs For KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector At Synchronics we have the experience in repairing KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector in a timely and cost effective manner. We provide free Quote for KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector sent to us for repair at our works. We provide an OEM level of quality service at a competitive, non-OEM price. We have the ability to repair and calibrate many KRAUTKRAMMER units from many different Manufacturers. With our state-of-the-Art technologies and dedicated technicians, our staff is able to ease the pain of any repair service order.
$1,015.00
Metal and composite flaw detection using ultrasound Compatible with any 64-element linear phased array probe Simple 30 second configuration C-scans can be displayed in amplitude or depth
$1,100.00
A flexible and portable high tech Ultrasonic Flaw detector for metal of all types. Fully compatible with a very wide array of conventional and both focused and unfocused phased array probes. Offering technicians most of the popular flaw sizing techniques including DGS, DAC, AVG, TGC and AWS. Thanks to the A, B, C, True Top and End scans imaging capabilities, users can address many applications from one instrument. 3D scan plans assist in creating inspection procedures and analysing the results.
$1,425.00
Don’t compromise on the inspection capabilities of your flaw detector. The EPOCH® 6LT portable flaw detector combines the functionality of a powerful ultrasonic flaw detection device with a form factor designed to thrive in rope access and high portability applications.
$1,350.00
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
$2,200.00
The BondMaster 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.
$2,585.00
Good working condition Olympus Bondmaster 600M for sale. This unit is in good shape with very few signs of use. The buttons work nicely and the screen is relatively scratch-free. The unit overall functions perfectly. Please check out the high resolution images for a closer look!
$2,180.00
New Olympus Omniscan MX2 16:128 PA Flaw Detector - Sale !! (Omniscan MX2)

The result of over 10 years of proven leadership in modular NDT test platforms, the OmniScan MX has been the most successful portable and modular phased array test instrument produced by Olympus to date, with thousands of units in use throughout the world.

Olympus now offers a new PA module with TOFD, a new UT module, as well as new software programs (NDT SetupBuilder and new OmniPC version) that expand the capabilities of the successful OmniScan MX2 platform and improve the workflow efficiency of nondestructive testing inspections.

Building on a Solid Basis

This second generation OmniScan MX2 increases testing efficiency, ensuring superior, advanced AUT application performance with faster setups, test cycles, and reporting, in addition to universal compatibility with more than 10 phased array and ultrasound modules. Designed for NDT experts, this high-end, scalable platform delivers true next-generation NDT performance.

The OmniScan MX2 offers a high acquisition rate and new powerful software features for efficient manual and automated inspection performance—all in a portable, modular instrument.

OmniScan_MX2_2010_04.psd

Faster Is Better!

Powerstart your day with the OmniScan MX2. The OmniScan MX2 simplifies and speeds up the setup process with its intuitive step-by-step Wizard, so you can start testing quickly. Featuring the industry-standard phased array user interface with faster-than-ever performance, a bigger and brighter 10.4 in. (26.4 cm) screen, new and unique intuitive touch-screen capabilities, and faster data transfer, the MX2 enables you to get to your next inspection quicker.

OmniScan MX2

More than an Instrument-A Solution Provider

The OmniScan MX2 is an important part of your inspection solution, and can be combined with other critical components to form a complete inspection system. Olympus offers a complete product range that includes phased array probes, scanners, analysis software, and accessories, all of which are integrated and packaged into rapidly deployable, application-specific solutions for a quick return on your investment. In addition, Olympus offers a high-quality global calibration and repair service, backed by a team of phased array application experts to ensure that you get the support you need.

Pressure Vessel Weld Inspection

Pressure Vessel Weld Inspection
A complete inspection of pressure vessel welds can be performed in a single scan using an OmniScan PA and manual scanner such as the HSMT series or a motorized scanner like the WeldROVER. By combining TOFD and PA in a single inspection pass, a significant reduction in inspection time can be achieved as compared with conventional raster scanning or radiography. Furthermore, inspection results are available immediately, enabling you to detect problems with welding equipment and fix them right away.

Composite Inspection

Composite Inspection
Parts made of laminate composite materials pose an inspection challenge due to their various shapes and thicknesses.
Olympus offers complete solutions for the inspection of carbon-fiber-reinforced polymer structures. These solutions are based on the OmniScan flaw detector, the GLIDER™ scanner, and dedicated probes and wedges designed for CFRP flat panel and radius inspection.

Weld Inspection of Small-Diameter Pipes

Weld Inspection of Small-Diameter Pipes
When coupled with the COBRA manual scanner, the OmniScan flaw detector is capable of inspecting pipes ranging from 0.84 in. OD to 4.5 in. OD. With its very slim design, this manual scanner is able to inspect pipes in areas with limited access. Adjacent obstructions such as piping, supports, and structures can be as close as 12 mm (0.5 in.).

Corrosion Mapping Inspection

Manual and Semiautomated
Corrosion Mapping

The OmniScan PA system with the HydroFORM scanner is designed to offer the best inspection solution for detecting wall-thickness reductions resulting from corrosion, abrasion, and erosion. In addition, this system detects mid-wall damage, such as hydrogen-induced blistering and manufacturing-induced delamination, and clearly differentiates such anomalies from loss-of-wall-thickness.
For this application, phased array ultrasound technology offers superior inspection speed, data point density, and detection.

Modular Instrument

A Platform that Evolves as your Needs Grow

Designed to secure both your current and future phased array investments, the OmniScan MX2 houses more than 10 different Olympus modules. You can be confident that you will get the most out of your investment as specifications will continue to evolve with your needs through constant software updates.

State of the Art PA2 and UT2 Modules

As a world leader in phased array technology, Olympus has released a new line of modules compatible with MX2 instrument.

PA2

The new phased array offer-led by the new innovative PA2 modules, features multiple improvements, such as:

Best Phased Array and TOFD Signal Quality Ever

  • Better signal-to-noise ratio
  • More powerful pulsers
  • 64 pure gray tone

More Multi-group Capabilities

  • Ability to use PA and UT channels simultaneously

General Hardware Improvements

  • Higher operating temperatures (45 °C)
  • New OmniScan probe connector with quick latch system
  • Designed for IP66 environmental rating
  • Extended autonomy on batteries
PA Module
16:64 PA2
16:128 PA2
32:128 PA2
32:128PR PA2

UT2

The new conventional ultrasound module features the same UT-channel technology as the PA2 modules, but offers twice as many channels.

UT Module
2 ch. UT2


OmniScan MX2 Mainframe Specifications

GeneralOverall dimensions (W x H x D)325 mm x 235 mm x 130 mm (12.8 in. x 9.3 in. x 5.1 in.)
Weight3.2 kg (7 lb), no module and one battery
Data StorageStorage devicesSDHC card*, most standard USB storage devices, or fast Ethernet.
*Lexar® brand memory cards are recommended for optimized results.
Data file size300 MB
I/O PortsUSB ports3
Audio alarmYes
Video outputVideo out (SVGA)
Ethernet10/100 Mbps
I/O LinesEncoder2-axis encoder line (quadrature, up, down, or clock/direction)
Digital input4 digital TTL inputs, 5 V
Digital output4 digital TTL outputs, 5 V, 15 mA
Acquisition on/off switchRemote acquisition enabled TTL, 5 V
Power output line5 V, 500 mA power output line (short-circuit protected)
Alarms3 TTL, 5 V, 15 mA
Analog output2 analog outputs (12 bits) ±5 V in 10 kΩ
Pace input5 V TTL pace input
DisplayDisplay size26.4 cm (10.4 in.) (diagonal)
Resolution800 pixels x 600 pixels
Brightness700 cd/m2
Number of colors16 million
TypeTFT LCD
Power SupplyBattery typeSmart Li-ion battery
Number of batteries1 or 2 (battery chamber accommodates two hot-swappable batteries)
Battery lifeMinimum 7 hours with two batteries
Environmental SpecificationsOperating temperature range-10 °C to 45 °C
(14 ºF to 113 ºF)
Storage temperature range-20 °C to 60 °C (-4 ºF to 140 ºF) with batteries
-20 °C to 70 °C (-4 ºF to 158 ºF) without batteries
Relative humidityMax. 70% RH at 45°C noncondensing
Ingress Protection RatingDesigned for IP66
Shockproof ratingDrop-tested according to MIL-STD-810G 516.6
MX2 Module CompatibilityMXU 4.1R8 and laterOMNI-M2-PA32128PR
MXU 4.0 and laterOMNI-M2-PA1664
OMNI-M2-PA16128
OMNI-M2-PA32128
OMNI-M2-UT-2CH
MXU 3.1 and MXU 4.1R12 and laterOMNI-M-UT-8CH

Phased Array Module Specifications (Applies to OMNI-M2 modules)

GeneralOverall dimensions (W x H x D)226 mm x 183 mm x 40 mm (8.9 in. x 7.2 in. x 1.6 in.)
Weight1.6 kg (3.5 lb)
Connectors1 Phased Array connector: Olympus PA connector
2 UT connectors: LEMO 00
Number of focal laws256
Probe recognitionAutomatic probe recognition
Pulser/ReceiverAperture32 elements*
Number of elements128 elements*
PulserPA ChannelsUT Channels
Voltage40 V, 80 V, and 115 V95 V, 175 V, and 340 V
Pulse widthAdjustable from 30 ns to 500 ns, resolution of 2.5 nsAdjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Pulse shapeNegative square pulseNegative square pulse
Output impedance (32:128PR model)35 Ω in pulse-echo mode
30 Ω in pitch-catch mode
< 30 Ω
Output impedance (all other models)25 Ω< 30 Ω
ReceiverPA ChannelsUT Channels
Gain0 dB to 80 dB, maximum input signal 550 mVp-p (full-screen height)0 dB to 120 dB maximum input signal 34.5 Vp-p (full-screen height)
Input impedance (32:128PR model)50 Ω in pulse-echo mode
90 Ω in pitch-catch mode
60 Ω in pulse-echo mode
50 Ω in pitch-catch mode
Input impedance (all other models)65 Ω60 Ω in pulse-echo mode
50 Ω in pitch-catch mode
System bandwidth0.5 MHz to 18 MHz (NOTE: The previously stated 0.6 MHz lower limit used a strict −3 dB attenuation for the cutoff frequency.)0.25 MHz to 28 MHz (-3 dB)
BeamformingScan typeSectorial and linear
Group quantityUp to 8
Data AcquisitionEffective digitizing frequencyUp to 100 MHz
Maximum pulsing rateUp to 10 kHz (C-scan)
Data ProcessingPA ChannelsUT Channels
Number of data pointsUp to 8,192
Real-time averaging2, 4, 8, 162, 4, 8, 16, 32, 64
RectifierRF, full wave, half wave , half wave –
Filtering3 low-pass, 3 band-pass, and 5 high-pass filters.3 low-pass, 6 band-pass, and 3 high-pass filters (8 low-pass filters when configured in TOFD)
Video filteringSmoothing (adjusted to probe frequency range)
Data VisualizationA-scan refresh rateReal time: 60 Hz
Data SynchronizationOn internal clock1 Hz to 10 kHz
On encoderOn 2 axes: from 1 to 65,536 steps
Programmable Time-Corrected Gain (TCG)Number of points32: One TCG curve per focal law
AlarmsNumber of alarms3
ConditionsAny logical combination of gates
Analog outputs2
The result of over 10 years of proven leadership in modular NDT test platforms, the OmniScan MX has been the most successful portable and modular phased array test instrument produced by Olympus to date, with thousands of units in use throughout the world.
$11,190.00
New Waygate Krautkramer Mentor UT Phased Array Flaw Detector - Sale !! (Mentor)
The Waygate Technologies Krautkramer Mentor UT, a Baker Hughes business product (formerly GE Inspection Technologies), is a powerful, connected ultrasonic flaw detector optimized for corrosion and erosion mapping of process vessels, pipes, and tanks. The Mentor UT brings the power of array inspection to everyday use with an intiuitive, touch-screen interface, and customizable inspection applications ("apps"). Users can create their own apps or use the preinstalled apps and completely customize the user interface to meet their needs. The device setup and calibration are simple to learn and can save in training costs while upping productivity.

FEATURES : 

  • Powerful 32/32 array inspection with conventional UT channel. 
  • Create your own inspection 'Apps" or use pre-installed apps on the device.
  • Reduce training costs with customizable touch-screen user interface. 
  • Streamline reporting and analysis with on-board wireless connectivity and data export.
  • Pair with Waygate Technologies' industry leading dual-element linear DM probes.


Physical
Dimensions (W x H x D)295 mm x 230 mm x 60 mm (12" x 9.4" x 2.4")
Weight (with battery)2.9 kg (6.5 lbs)
Display
Size264 mm (10.4") diagonal
Resolution1024 x 768 pixels
ModeIndoor and outdoor specific color modes
Viewing Angle± 85˚ all directions
Touch Screen (Multi-touch)
Gloved OperationYes
SurfaceChemically strengthened glass, scratch resistant, chemical resistant, optically bonded to display
Data Storage
Solid State Hard Drive128 GB
USB StorageUSB 2.0 w included module
Data CaptureFull ASCAN capture for every CSCAN point, all settings. Recall on instrument with full analysis capability
Data Filesmemd files, CSV files
Settings FilesAll instrument settings plus position in workflow
Screen CaptureJPG Format
ReportPDF Format
Connectivity
Wi-Fi802.11 b, g, n
ConnectorsUSB 2.0, Ethernet, HDMI
Remote CollaborationLocal Network and Internet-Enabled via InspectionWorks Connect
InspectionWorksEnabled
I/O
Axes2 digital quadrature encoders for X-Y axes 
AudibleTone, 2.7 kHz
Power
Internal Battery63 WH Lithium Ion
External Battery84 WH Lithium Ion
Power Supply100 to 240 VAC, 47–63 Hz, 1.9 A; 12VDC
Battery Life3 hrs internal, 6 hrs with external battery under typical operating conditions
ComplianceMeets IATA air transport regulations with one contained installed battery and one packed external battery
Environmental
Operating Temperature-20C to 55 C (-4F to 131F) to MIL-STD-810G Method 501.5 & 502.5, Procedure I
Storage Temperature-20C to 70C (-4F to 158F) to MIL-STD-810G Method 501.5 & 502.5, Procedure II
Ingress ProtectionTested to IP65
Shock4’ Transit Drop to MIL-STD-810G method 516.6, Procedure V
Data Visualization
User InterfaceCustomizable with Mentor Create software
ZoomAny data view may be expanded to full screen with gesture
Instructional MaterialRich Text, JPG, PNG, BMP, PDF or Video (MP4)
ViewsA-SCAN, C-SCAN, C-SCAN OVERVIEW, E-SCAN, S-SCAN
Probe SelectionSwap between conventional and phased array on same screen
Evaluation2 Gates, one can be used as interface echo gate
MeasurementsAmplitudes, Depth, Distance, % Wall Loss, Thinnest Point, X and Y Positions
Calibrations Phased Array: TCG, Material Velocity, Probe Delay, Auto80, Encoder Cal, Dead Element Check Conventional: 2 Point (Material Velocity and Probe Delay)
Configuration
Phased Array
Channels32:32 PR
Aperture1–32 Elements
Focal Laws1024
ScanningLinear, sectorial, focused
GroupsUp to 8
Conventional
Channels1
Pulser (Phased Array and Conventional)
PRF10 Hz to 20 kHz
Pulse ShapeBipolar or unipolar square wave
Voltage20–150 Vpp, 0 - -75V0p; in 5 V steps
Width (auto or manual)50–3000 nS
Delay Step Increment10 nS
Receiver and Digitizer (Phased Array and Conventional)
Gain0–78 dB (Phased Array), 0-94 dB (Conventional); in 0.2 dB steps
TCG
Number of PointsUp to 16
Slope50 dB/µS
RectificationPos HW, Neg HW, Full, RF
Bandwidth0.5 MHz to 15 MHz
Digitizing Rate62.5 MHz, up-sampled to 500 MHz
Delay Step Increment2.5 nS
Acquisition Range50 nS to 150 µS
ASCAN Compression Points512, 1024, 2048, 4096

Package Include : 

  • Mentor UT with Installed Applications
  • Encoder Module with USB and X & Y Encoder Inputs
  • Lithium Ion (Installed) Rechargeable Battery Pack
  • External Battery Pack
  • Lithium Ion Battery Charger /AC Power Supply
  • Transport Case
  • Soft Case
  • Quick Start Operating Card
  • Operating Manual on USB
  • Mentor Create Software on USB
The Waygate Technologies Krautkramer Mentor UT, a Baker Hughes business product (formerly GE Inspection Technologies), is a powerful, connected ultrasonic flaw detector optimized for corrosion and erosion mapping of process vessels, pipes, and tanks. The Mentor UT brings the power of array inspection to everyday use with an intiuitive, touch-screen interface, and customizable inspection applications ("apps"). Users can create their own apps or use the preinstalled apps and completely customize the user interface to meet their needs. The device setup and calibration are simple to learn and can save in training costs while upping productivity.
$7,500.00
Used General Electric Mentor UT Phased Array Flaw Detector - Sale !! (Mentor UT)
The entire UT flaw detector system is housed in a glove-friendly touchscreen tablet that’s as easy to use as a smartphone. Pre-loaded Mentor Create software is fully customizable, allowing for user-defined menus and workflows (apps) for step-by-step guidance through the inspection process– from calibration to probe location to analysis. Confident and educated users mean that even the most complex inspections are performed consistently every time. 

Mentor UT is the first ultrasonic testing device to easily allow wireless connectivity and live streaming, so inspectors can get real-time second opinions when they need them. That same wireless cloud connectivity enables Mentor UT to remotely generate comprehensive inspection reports on users’ desktops with the click of a button.

User-defined menus can walk technicians through every step of any inspection - from probe selection and calibration to reporting - ensuring consistency across your inspections, every time, from every inspector. And with the flexibility to load multiple workflows on one device, you can guarantee easy access to the right apps for any inspection.

Highlights

Benefits

Conveniently upload & analyze your inspection data on your computer
User-defined menus walk technicians through every step of any inspection
Flexibility to load multiple workflows on one device
Remote communication between experts and inspector

Features

Remote calibration-capable
High-performance design
Rugged durability
Intuitive operation

Applications

Customize or create inspection “apps” for your unique testing procedures, industry applications, and experience levels

Mentor UT Features

Mentor UT was designed around user needs. Its intuitive glove-friendly touch screen and a durability rating of IP65allow for more accurate and efficient inspections, under any industrial conditions. 

Perform inspections confidently using Mentor UT’s powerful 32:32 phased array flaw detector (upgradable to 32:128)with conventional UT channel and 18kHz pulse repetition frequency (PRF).

Ensure that UT inspections are performed consistently every time by custom-tailoring workflows (apps) to guide users through the calibration and inspection process step by step. On-board wireless connectivity and data export capabilities streamline one-touch reporting and analysis (offline analysis software included).

On-demand live support empowers inspectors to make on the spot maintenance decisions anywhere, anytime.

Mentor UT also features unmatched probe versatility. Choose from commonly found Tyco or Ipex probe connection options, or industry-standard Phasor-style connector for improved probe compatibility.

This device also easily pairs with Waygate Technologies' industry-leading dual-element linear DM probes for corrosion inspection, linear array probes for weld testing and composite inspection, as well as a wide variety of commercially available scanners. 

Included :

1 Each Case For Main Unit (1 OF 5) 
1 Each GE Brand Pouch 
1 Each 32:32PR Phased Array Flaw Detector, 1024 Laws, 8 Groups, 10Hz-20kHz PRF, 0-78dB Gain, 16 Points TCG 
1 Each Shoulder Strap 
1 Each Hand Strap 
1 Each AC ADAPTER E119932-C AWM 2464 300V 16AWG VW-1 
2 Each Battery Pack for GE Mentor Unit 
1 Each Battery Charger 
1 Each Mentor Software, Manual, & Quick Start Guide 
1 Each Cover for Phased Array Flaw Detector 
1 Each 5MHz Scanner for Mentor UT Phased Array Flaw Detector, 32 Elements, 1.5mm Pitch, Corrosion Mapping 
1 Each GENE-DMCABLE_3M_TOP | MODULAR PROBE (S/N 19J02D55) 
1 Each MODULAR PROBE(S/N 19KOOURD) 
1 Each S/N 19H0003M 32:128PR Array Add-On for Mentor UT Phased Array Flaw Detector 
1 Each (2 OF 5) CASE FOR 100N3901 
2 Each (3 OF 5)(4 OF 5) PLASTIC CASES 
1 Each Pelican 1400 (5 of 5) 
1 Each Powercord for SPU65-105 Ac Adapter ROHS Compliant 10A 125V

Also you can check : Used GSSI StructureScan Pro SIR 4000 Control Unit - Sale !!

Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.
$4,300.00
New Zetec TOPAZ64 Portable Phased Array UT Instrument - Sale !! (TOPAZ64)
FEATURING THE LATEST UT TECHNOLOGIES
TOPAZ64 is packed with smart features to handle all UT inspections in one portable package. It features the latest technologies in ultrasound including:

Code Compliant 64/128PR Phased Array UT
High Resolution Full Matrix Capture (FMC)
Total Focusing Method (TFM) up to 1M Data Points per Frame
Time of Flight Diffraction (TOFD)
As a result, TOPAZ64 offers advanced inspection capabilities that can improve productivity in the inspection process.

DRIVEN BY INDUSTRIALLY PROVEN ULTRAVISION SOFTWARE
TOPAZ64 includes UltraVision Touch software onboard. This powerful, yet easy to use software controls the acquisition of Phased Array UT signals, displays real-time images and provides online and offline data analysis. UltraVision offers advanced features for TOPAZ64 designed to improve Phased Array UT inspections, including real-time high resolution TFM, and post-processed TFM from recorded elementary A-Scans. TOPAZ64 and UltraVision Software support 2D matrix arrays in pulse echo, pitch & catch or multiprobe configurations without the need for any external software.

SPECIFICATIONS

Size (H × W × D)343 × 278 × 158 mm (13.5 × 10.9 × 6.2 in)
Weight (including one battery)9.1kg (20.0 lb)
Multi-Touch Display12.1 in. wide, 1024 x 728 pixels
Air IntakeNo
Battery OperationYes
Phased Array ConnectorZPAC
Phased Array Channels64/64P or 64/128PR
UT Channels2 P/E or 2 P/C
Amplitude Resolution16-bits
Measurement Gates4 1 synchronization gate (peak, crossing, autocrossing)
Data InterfacesEthernet 1000 Base-T; 1 x USB 3.0; 3 x USB 2.0
Maximum PRF< 40 kHz
Data Compression1, 2, 4, 8, 16
Max. Applied Voltage (50 ohms)150Vpp PA UT (Bipolar) /75V (Unipolar) / 200V UT
Bandwidth (-3 dB)0.5 to 18 MHz PA; 0.5 to 25 MHz UT
RectificationDigital
FilteringAnalog / Digital (FIR)
SmoothingDigital
Self-CheckYes
Automated Probe DetectionYes (with Zetec probe ID chip)
Automated Scanner DetectionYes (with Zetec probe ID chip)
# Focal Laws1024 with unlimited groups
TFM Frame SizeUp to 1M points
TFM Frame RateUp to 110 Hz (65k points frame resolution)
Maximum Number of Samples16,384
Maximum Data File Size2 GB; Unlimited for raw A-Scan data
Encoder Interfaces3 quadrature-type
Onboard SoftwareUltraVision Touch embedded
Serves as Protection KeyLicense for UltraVision Touch
Data Acquisition & Analysis (for remote data acquisition or off line postprocessingUltraVision Touch; UltraVision 3
Embedded Hard Drive256 GB SSD
Video OutputHDMI
Instrument CalibrationCompliant with ISO 18563-1 / EN 12668-1
Voltage100 to 240 VAC
Frequency50 or 60 Hz
Maximum Power100 VA
Operating Temperature Range-10°C to 45°C (14°F to 113°F)
Storage Temperature Range-40°C to 70°C (-40°F to 158°F)
Relative Humidity80% non-condensing



The Zetec TOPAZ64 is a fully integrated, portable, 64 channel Phased Array Ultrasonic Testing instrument which enables you to complete faster and more accurate inspections. The Topaz 64 is ideal for use in the Oil & Gas, Power Generation, Manufacturing, and Transportation industries. This instrument features 64 active channels for fast and accurate inspections in welds, complex components, and corrosion mapping. The Topaz 64 is also suited to encoded or manual inspections.
$10,500.00
New Olympus EPOCH 650 Ultrasonic Flaw Detector - Sale !! (EPOCH 650)
EPOCH 650 Ultrasonic Flaw Detector
Economical Size, Quality Performance
The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.


The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use. 

Designed for All Inspection Environments
The EPOCH 650 is designed for use in nearly any inspection environment, from bench top testing in a laboratory to extreme outdoor and hazardous conditions. Designed for IP rating in either knob (IP66) or navigation pad (IP67) configurations, and tested to very high environmental and reliability standards, the EPOCH 650 allows users in any inspection environment to feel confident in both the performance and durability of the instrument.

Key Features :

Designed to meet the requirements of ISO 22232-1
PerfectSquareTM tunable square wave pulser
Full screen A-scan mode
Digital high dynamic range receiver
Thirty digital filters for enhanced signal-to-noise ratio
2 kHz PRF for rapid scanning
Knob or navigation pad adjustment configurations
Large, full VGA sunlight readable display
15 hours of battery life
Standard dynamic DAC/TCG and onboard DGS/AVG
Multiple on-board report formats
MicroSD memory card for data transfers
Optional Corrosion Module software with Encoded B-scan
USB On-The-Go (OTG) for PC communication
Alarm and VGA outputs
Optional analog output

Simple and Comfortable Operation
 

The EPOCH 650 design is focused on providing a very high level of flaw detection with the simplicity of a basic instrument. The EPOCH 650 is designed to be ergonomic, intuitive, and practical for both experienced and novice ultrasonic inspectors.

Intuitive User Interface

The EPOCH 650 user interface is based on the industry leading EPOCH 600 flaw detector. The EPOCH 650 combines a simple menu structure for instrument settings, calibration and software feature adjustment, with the EPOCH brand’s hallmark direct-access key approach

for critical inspection functions such as gain and gate adjustment, screen freeze, and file save. Supported in multiple languages, the EPOCH 650 user interface is intuitive for any level of operator. 

EPOCH 650 DGS/AVG feature - Standard Screen mode

EPOCH 650 DGS/AVG feature - Standard Screen mode 

Vibrant VGA Display with Full Screen Mode

The EPOCH 650 features a full VGA (640 x 480 pixels) resolution display. The horizontal design of the EPOCH 650 optimizes the A-scan size and readability on this high quality display. Built with transflective technology, this VGA display provides excellent clarity in indoor, low lighting conditions using its powerful backlight, as well as in direct sunlight by using the ambient light as a pseudo-backlight.

The full screen mode feature enhances this vibrant display to provide the largest A-scan in an EPOCH series flaw detector! 

EPOCH 650 DGS/AVG feature - Full Screen mode

EPOCH 650 DGS/AVG feature - Full Screen mode 


Options for Comfortable Navigation

In order to accommodate different user needs and preferences, the EPOCH 650 is available in two hardware configurations: 

Knob

The adjustment knob on the EPOCH 650 is used along with the CHECK and ESC keys to adjust parameter values in either coarse or fine increments. You have the ability to lock the knob to prevent accidental parameter value changes during an inspection. This configuration provides smooth value slewing for customers who prefer adjusting parameters using a knob. The knob configuration is designed to meet the requirements of IP66. 


EPOCH 650 Knob

EPOCH 650 Navigation Pad

Navigation Pad

The EPOCH 650 navigation pad is a hallmark feature of the EPOCH flaw detectors. The up and down arrows on the navigation pad are used for coarse parameter adjustment, and the left and right arrows for fine adjustment. The navigation pad also contains additional functions and frequently used parameters such as gain, save, and the CHECK and ESC keys. The navigation pad configuration is designed to meet the requirements of IP67. 


 


Physical Features – Rear

A – USB On-The-Go port
B – MicroSD card
C – DC power connector
D – VGA port
E – Digital I/O port
F – Transducer connectors (2)
G – Battery door
H – Pipe stand 

EPOCH 650 Back Features


Portable, Rugged, and Ergonomic

Physical Features

The EPOCH 650 is a lightweight, portable flaw detector built to be rugged and flexible for nearly any inspection. Some key physical features include:

  • Large, full VGA resolution transflective display for vivid clarity in any indoor lighting and direct sunlight conditions
  • Rubber overmolded bumpers on all four corners for shock absorption and anti-marring considerations
  • Four-point harness connection for chest straps
  • “No tools” access to battery compartment and side I/O door
  • Continuous position stand with right angle crook for improved stability from 0 to 180 degrees
  • Gasketed side door for USB OTG connection and removable memory
  • Standard internal, rechargeable lithium-ion battery
  • Lightweight, ergonomic design for increased portability and ease of use 

Standard Package

  • EPOCH 650 Digital ultrasonic flaw detector, AC or battery operation
  • Charger/AC adapter (100 VAC, 115 VAC, 230 VAC, 50 Hz or 60 Hz)
  • Rechargeable lithium-ion battery
  • Transport case
  • USB cable
  • Quick reference card
  • Comprehensive operation manual (CD) 
EPOCH 650 Flaw Detector Specifications

Instrument Inputs/OutputsUSB PortsUSB On-The-Go (OTG)
RS-232 PortYes
Video OutputVGA output standard
Analog Output1 analog output (optional), Selectable 1 V/10 V Full Scale, 4mA max
Alarm Output3 alarm outputs, 5 V TTL, 10 mA
Trigger I/OTrigger input, 5V TTL;
Trigger output, 5V TTL, 10 mA max
Encoder Inputs1-axis encoder line (quadrature - Corrosion Module mode only)
Environmental RatingsIP Rating

Designed to meet the standards of the Ingress Protection (IP) rating number IP67 (navigation pad version) or IP66 (knob version) per IEC 60529-2004 (Degrees of Protection provided by enclosures – IP Code).

The product design was confirmed to meet the IP rating by means of Olympus internal design verification test process that occurs prior to the release of the product to production.

Explosive Atmosphere

Safe operation as defined by Class I, Division 2, Group D, as defined in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL-STD-810F, Method 511.4, Procedure I.

Shock Tested

MIL-STD-810F, Method 516.5 Procedure I, 6 cycles each axis, 15g, 11 ms half sine.

Vibration Tested

MIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, general exposure: 1 hour each axis

Operating Temperature

–10 °C to 50 °C (14 °F to 122 °F)

Battery Storage Temperature

0 °C to 50 °C (32 °F to 122 °F)

GeneralOverall dimensions (W x H x D)236 mm x 167 mm x 70 mm (9.3 in. x 6.57 in. x 2.76 in.)
Weight1.6 kg (3.5 lb), including lithium-ion battery
KeypadEnglish, International, Japanese, Chinese
LanguagesEnglish, Spanish, French, German, Japanese, Chinese, Portuguese, Russian
Transducer connectionsBNC or Number 1 LEMO
Data storage100,000 IDs onboard, removable 2 GB MicroSD card (standard)
Battery typeSingle lithium-ion rechargeable standard
Battery life15 h to 16 h (lithium-ion)
Power requirementsAC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 HZ to 60 Hz
Display typeFull VGA (640 x 480 pixels) transflective color LCD, 60 Hz update rate
Display dimensions (W x H, Diag.)117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)
PulserPulserTunable Square Wave
PRF10 Hz to 2000 Hz in 10 Hz increments
Energy settings100 V, 200 V, 300 V or 400 V
Pulse widthAdjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare™ technology
Damping50, 100, 200, 400 Ω
ReceiverGain0 to 110 dB
Maximum input signal20 V p-p
Receiver input impedance400 Ω ± 5%
Receiver bandwidth0.2 MHz to 26.5 MHz at -3 dB
Digital filter settingsThirty digital filter sets standard 
Seven ISO 22232-1:2020 compliant filters (0.2-10 MHz, 2.0-21.5 MHz, 8.0-26.5 MHz, 0.5-4 MHz, 0.2-1.2 MHz, 1.5-8.5 MHz, 5-15 MHz)
RectificationFull-wave, Positive Half-wave, Negative Half-wave, RF
System linearityHorizontal: ± 0.5% FSW
Resolution0.25% FSH, amplifier accuracy ± 1dB
Reject0 to 80% FSH with Visual Warning
Amplitude measurement0 to 110% full screen height with 0.25% resolution
Measurement rateEquivalent to PRF in all modes
CalibrationAutomated calibrationVelocity, Zero Offset
Straight Beam (First Backwall or Echo-to-Echo)
Angle Beam (Soundpath or Depth)
Test modesPulse Echo, Dual, or Through Transmission
UnitsMillimeters, inches, or microseconds
Range3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) @ 5,900 m/s (0.2320 in./μ)
Velocity635 m/s to 15240 m/s (0.0250 in./µs to 0.6000 in./µs)
Zero offset0 µs to 750 µs
Display delay-59 mm to 13,401 mm (-2.320 in. to 526.97 in.) @ longitudinal velocity in steel
Refracted angle0° to 90° in 0.1° increments
GatesMeasurement gates2 fully independent gates for amplitude and TOF measurements
Gate startVariable over entire displayed range
Gate widthVariable from Gate Start to end of displayed range
Gate heightVariable from 2 to 95% full screen height
AlarmsPositive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)
MeasurementsMeasurement display locations5 locations available (manual or auto selection)
Gate (1, 2)Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
Echo-to-EchoStandard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurementsOvershoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values
DAC/TCGStandard
DAC pointsUp to 50 points, 110 dB dynamic range
Special DAC modesCustom DAC (up to 6 curves), 20-80% View
Curved surface correctionStandard OD or Bar correction for Angle Beam measurements
Corrosion (optional)Zero-cross measurement algorithm, V-Path correction, Single or Echo-to-Echo, Encoded B-scan

If you work in explosive atmospheres, the EPOCH 650 Ex flaw detector conforms to the requirements of the ATEX directive. 

Software Options

• EP650-TEMPLATE (Q1400002): Template Storage
• EP650-API5UE (Q1400003): API 5UE Flaw Sizing
• EP650-AVERAGE (Q1400004): Waveform Averaging
• EP650-IG (Q1400005): Interface Gate
• EP650-BEA (Q1400006): Backwall Echo Attenuator (BEA)
• EP650-CORRSN (Q1400001): Corrosion Module (includes encoded B-scan)

Optional Accessories

• 600-BAT-L-2 (U8760058): Rechargeable lithium-ion battery
• EP4/CH (U8140055): Chest harness
• 600-TC (U8780294): Transport case
• CBAS-10668-0060 (Q7790012): RS232 communication cable
• DSUB-HD15-6 (U8780333): Digital output cable
• 600-C-VGA-5 (U8780298): VGA output cable
• MICROSD-ADP-2GB (U8779307): 2 GB microSD memory card
• 600-SC-K (U8780334): Soft carrying case with pouch (knob version)
• 600-SC-N (U8779879): Soft carrying case with pouch (navigation pad version)
• N600-EXTALM (U8780332): External alarm beeper
• CBAS-10669-0010 (Q7790008): Encoder cable for B-scan buggy (10 feet, other lengths available) 

The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.
$2,570.00
New Sonatest WAVE Digital Ultrasonic Flaw Detector - Sale !! (WAVE)
Features

Interactive Scan Plan

The WAVE interactive scan plan has been developed to ease diagnostics on the inspected part.  The scan plan can reproduce complex geometries such a Curved parts and T-joints.  Combined with a real-time Raytracer, this unique feature facilitates the distinction between a real flaw and a geometrical indication.  Thus avoiding unnecessary repair.


Import Custom Parts


The WAVE can import a custom part in the interactive scan plan. This feature enables the user to visualise sound propagation in complex geometries. All the benefit of the Interactive Scan Plan remains with the addition of removing the limitations that come with predefine parts.

UTouch Technology

UTouch Technology allows your device to operate in the same   way as a mobile phone.  Combined with rugged components   and an intelligent algorithm which makes the distinction   between couplant and finger.

Application Concept

The WAVE appliction concept combines conformity and performance which allows the operator to customise the user interface according to their specific procedure.

The intuitive user interface with an easy to use display will guarantee workflow optimisationas well as preventing potential operational errors.

WAVE Companion

Small_Companion.png The WAVE Companion software offers an evironment where dedicated   predefined applications setups are created and uploaded to WAVE   platform.
Once created, the new app setups are transferred and installed on the unit via wired (USB-C / ethernet) or wireless network.  The default app allows access to all functionalities and features where the user can modify the entire settings.

Technical Specifications:

Wave Concept    Wave Applications    Up to 50 Apps
Wave UTouch Technology    P-CAP Multi Touch
Interactive Scan Plan    Crown and Root Geometries    Yes
Weld Overlay    Yes
TKY / Nozzle / Flange Geometries    Yes
Curved Surface    Yes
Live Raytracer    Yes
Projected A-Scan    Yes
True Depth on Complex Shapes    Yes
Custom CAD Import    Yes
Measurements    Gates    4
IFT    Yes
DAC / Split DAC    Standard
TCG    Standard
AVG / DGS    Standard
AWS    Standard
API    Standard
Curved Surface Correction (CSC)    Standard
TKY and Complex Shapes    Standard
Transmitter    PRF    1500 Hz
Pulser (Voltage)    100 to 500 V
Receiver    Gain Range    110 dB
Bandwidth    0.25 to 30 MHz
Filters    26 filters
Signal Averaging    Yes
General    Battery Life    10 Hours
Display Size (Resolution)    7" wide (1024 x 600)
Dimensions    8.7" x 6.8" x 2.5" (222 x 174 x 63mm)
Weight    3.7 lbs. (1.7 kg)
IP Rating    Designed for IP67
Operating Temperature    14°F to 113°F (-10°C to 45°C)
Wifi (embedded)    Yes

Includes:

WAVE Interactive Ultrasonic Flaw Detector
BNC Connectors, Battery and Charger (with outlet cable)
Ultrasonic Couplant
Ethernet Adapter & Cable
User Manual & Quick Start Guide
Certificate of Calibration and Conformance
Carrying Case

Also you can check price : Used Leica AT960-MR Laser Tracker Sale !!

The WAVE interactive scan plan has been developed to ease diagnostics on the inspected part. The scan plan can reproduce complex geometries such a Curved parts and T-joints. Combined with a real-time Raytracer, this unique feature facilitates the distinction between a real flaw and a geometrical indication. Thus avoiding unnecessary repair.
$2,400.00
New GE Inspection Technologies USM Go Plus Flaw Detector - Sale !! (USM Go Plus)
The GE Inspection Technologies USM Go Flaw Detector has been ergonomically designed to provide an instrument which is light, small and easy to use in the harshest inspection environments. Navigation is simplified using the proven graphical user interface (GUI) and D-pad (arrow key) control, allowing one-handed operation and fast and accurate adjustment.

Weld Inspection
Trigonometric projections
AWS
DAC
DGS

Inspection of Forgings and Castings
Manual PRF adjustment
Phantom echo indicator
DGS

Inspection of Rails

High PRF (up to 2000 Hz)
Lightweight: 850 g (1.87 lb)
Small size and ergonomics

Inspection of Composites
RF Display
2 gates with B-start triggered with echo in gate A
TCG correction with high slope 120 dB/μs
Reflector depth indicated in layer

USM Go Standard Model (GEIT1480179) Kits:

ASME Weld
MWB 45° angle beam transducer, 4MHz frequency, 8x9mm element (0056927)
MWB 60° angle beam transducer, 4MHz frequency, 8x9mm element (0056928)
MWB 70° angle beam transducer, 4MHz frequency, 8x9mm element (0056929)
MSEB dual element straight beam transducer, 4MHz, 3.5x10mm element (0057462)
Right Angle Lemo #00 to Lemo #00 cable (022-509-819)
Right Angle Lemo #00 to Dual Lemo #00, KBA 533 cable (022-509-821)
AWS Weld
AWS Gamma angle beam transducer, 2.25MHz frequency, 16x19mm element (113-292-601)
AWS 45° wedge, 63x63mm element (118-340-104)
AWS 60° wedge, 16x16mm element (118-340-105)
AWS 70° wedge, 16x16mm element (118-340-106)
Right Angle Lemo #00 to BNC cable (022-509-822)
General Purpose
MB S straight beam transducer, 4MHz frequency, 10mm element (0057749)
Right Angle Lemo #00 to Lemo #00 cable (022-509-819)

Features:
USM Go comes with D-pad (arrow key) control
DMS Go thickness gauge upgrade available
LCD display, 800 x 480 pixels
Flip function allows for left or right hand use
Pulser (EN12668 specifications)
Simulated spike pulser mode
120 to 300V amplitude
Uni-polar square wave (optional)
120 to 300V with 10V steps pulser voltage
30 to 500ns with 20ns steps pulser width
50 or 1000 Ohms damping
Vibration and shock tested
IP67 dustproof & waterproof

What's In The Box:

(1) Lithium Ion "on-board" rechargeable battery
(1) Battery charger /AC power supply
(1) LCD screen protectors (10-pack)
(1) SD card (8GB)
(1) Transport case
(1) Hand strap
(1) Quick reference card
(1) Operating manual on CD
(1) Certificate of conformity
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
$2,250.00
New Olympus OmniScan X3 64 Phased Array Flaw Detector - Sale !! (OmniScan X3 64)
Power You Can Carry

Housed in the field-proven rugged and portable OmniScan X3 enclosure, the OmniScan X3 64 flaw detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.

OmniScan X3 Phased Array Flaw Detector with Innovative TFM
Confidence You Can See

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, including total focusing method (TFM) imaging and advanced visualization capabilities, backed by its high image quality enable you to complete your inspection with greater confidence.

Benefit from 64-Pulser Phased Array
Exploit the full potential of 64-element phased array probes using the OmniScan X3 64 flaw detector to achieve improved resolution at the focal point.

Slide Right: Acquired using a 32-channel OmniScan X3 unit with a 64-element probe (5L64-A32 model), this S-scan is a high-quality image but the resolution reflects the fact that only the middle 32 elements could be used for the focal law.  

Slide Left: Using a full 64-element aperture (5L64-A32 probe), the OmniScan X3 64 flaw detector provides better PA resolution at the focal point, enabling you to more easily distinguish indications that are close together or in a cluster.

Access Full 128-Element Aperture TFM
Made possible by new generation electronics, TFM imaging offers better focusing capabilities for smaller indications and an improved signal-to-noise ratio (SNR). With its 128-element aperture capacity, the OmniScan X3 64 model provides enhanced image clarity.

Slide Right: This TFM image was acquired with 64 elements of a 128-element probe (3.5L128-I4 model) using an OmniScan X3 32-channel model.

Slide Left: Here, the OmniScan X3 64 flaw detector enabled us to use the full 128-element aperture of our 3.5 MHz, 128-element I4 probe. Note the improved resolution and reduced background noise.

Improved Phased Array

Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.

Ease Corrosion Monitoring Using Phased Array
Using phased array to inspect corrosion offers many benefits, including excellent coverage and resolution. However, becoming proficient in phased array techniques can be challenging. The OmniScan X3 flaw detector combines advanced functions such as gate synchronization with thoughtfully designed software and simplified menus, so you can obtain accurate data more easily. Configure your setup quickly thanks to its A-scan synchronization processing and manual time-corrected gain (TCG).

 • Data Specifications • Acoustic Specifications • TFM/FMC • Operating Environment

Type

Multigroup, multimode ultrasonic flaw detector
Size (W × H × D)335 mm x 221 mm x 151 mm (13.2 in. x 8.7 in. x 5.9 in.)
Weight5.7 kg (12.6 lb) (with 1 battery)
Hard Drive CapacityOmniScan X3 : Internal 64 GB SSD
OmniScan X3 64 : Internal 1TB SSD
extendable using an external USB drive
Storage DevicesSDHC and SDXC cards or most standard USB storage devices
Max Onboard File Size25 GB
GPSYes (unless specified otherwise for some regions)
Alarms3
Wireless Connection

Yes – wireless LAN dongle included in the package (model varies according to region)

PA Connectors1 connector
UT Connectors4 (2 channels P/R)
CertificationsISO 18563-1:2015
ISO-22232-1:2020
Display
TypeTFT LCD with resistive touch screen
Size269 mm (10.6 in.)
Resolution1280 × 768 pixels
Number of Colors16 million
Viewing AnglesHorizontal: −85° to 85°
Vertical: −85° to 85°
I/O Ports
USB 2.02 ports (one hidden behind the battery)
USB 3.01 port
Video OutputVideo out (HDMI)
Memory CardSDHC port
CommunicationEthernet
I/O Lines
Encoder2-axis encoder line (quadrature quadrature direction), 3rd encoder ready
Digital Input6 digital inputs, TTL
Digital Output5 digital outputs, TTL
Acquisition On/Off SwitchThrough the configuration of a digital input
Power Output Line5 V nominal, 1 A (short-circuit protected), and 12 V output at 1 A
External DC Supply
DC-IN Voltage15 VDC to 18 VDC (min. 50 W)
ConnectorCircular, 2.5 mm pin diameter, center-positive
Battery
TypeLithium-ion battery
Capacity87 Wh
Number of Batteries2
Life5 hours using 2 batteries (hot-swap capable)
PA/UT Configuration
Bit Depth16 bits
Maximum PRF20 kHz
Frequency
Effective Digitizing FrequencyUp to 100 MHz
Display
Refresh RateA-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Envelope (echo-dynamic mode)Yes: Volume-corrected S-scan (30 Hz)
A-Scan HeightUp to 800%
Synchronization
On Internal Clock1 Hz to 10 kHz
External PaceYes
On EncoderOn 2 axes: from 1 to 65,536 steps

Data Specifications

Processing
Maximum Number of A-Scan Data PointsUp to 16,384
Real-Time AveragingPA: 2, 4, 8, 16
UT: 2, 4, 8, 16, 32, 64
RectificationRF, full wave, half wave , half wave-
FilteringPA channel (OmniScan X3): 8 low-pass, 6 band-pass, and 4 high-pass filters
PA channel (OmniScan X3 64): 9 band-pass and 7 high-pass filters
UT channel: 8 low-pass, 6 band-pass, and 4 high- pass filters (3 additional filters when configured in TOFD)
Video FilteringSmoothing (adjusted to the probe frequency range)
Programmable TCG
Number of Points32: One TCG (time-corrected gain) curve per focal law
RangePA (standard): 40 dB per step of 0.1 dB
UT: 100 dB per step of 0.1 dB
Maximum SlopePA (standard): 40 dB/10 ns
UT: 40 dB/10 ns

Acoustic Specifications

ModelOmniScan X3OmniScan X3 64Both
PulserPA ChannelPA ChannelUT Channels
Voltage40 V, 80 V, and 115 V10 Vpp, 20 Vpp, 40 Vpp, 80 Vpp, 120 Vpp, and 160 Vpp85 V, 155 V, and 295 V
Pulse WidthAdjustable from 30 ns to 500 ns; resolution of 2.5 nsAdjustable from 30 ns to 1000 ns (half period of bipolar pulse or duration of negative of pulse); resolution of 5 nsAdjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Fall Time< 10 ns< 10 ns< 10 ns
Pulse ShapeNegative square pulseBipolar negative-positive square pulse Negative square pulse

Output Impedance28 Ω in pulse-echo
24 Ω in pitch-catch
35 Ω< 30 Ω
ReceiverPA ChannelUT Channels
Gain Range0 dB to 80 dB maximum input signal; 550 mVp-p (full-screen height).0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height).0 dB to 120 dB maximum input signal; 34.5 Vp-p (full-screen height).
Input Impedance57 Ω ± 10% at 9 MHz in pulse-echo
100 Ω ± 10% at 9 MHz in pitch-catch
120 Ω ±10 % at 13 MHz50 Ω in pulse-echo mode
50 Ω in pulse-receive mode
System Bandwith0.5 MHz to 18 MHz0.2 MHz to 26.5 MHz0.25 MHz to 28 MHz
Beam FormationPA ChannelUT Channels
Scan TypeSingle, linear, sectorial, compound, and TFM-
Maximum ApertureOMNIX3-PATFM1664PR = 16 elements
OMNIX3-PATFM16128PR = 16 elements
OMNIX3-PATFM32128PR = 32 elements
OMNIX3-PATFM64128PR = 64 elements-
Number of Receiving ElementsOMNIX3-PATFM1664PR = 64 receiving elements
OMNIX3-PATFM16128PR = 128 receiving elements
OMNIX3-PATFM32128PR = 128 receiving elements
OMNIX3-PATFM64128PR =128 elements-
Number of Focal LawsUp to 1024-
Delay Range Transmission0 µs to 10 µs in 2.5 ns increments0 µs to 10 µs in 5 ns increments-
Delay Range Reception0 µs to 6.4 µs in 2.5 ns increments-

TFM/FMC

Supported ModesPulse-echo: L-L, T-T, and TT-TT
Self-tandem: LL-L, TT-T, TT-L, TL-T, LT-T, TTT-TT, and TL-L
Number of GroupsUp to 4 simultaneous TFM groups
Maximum Aperture64-element aperture for 64:128PR
64-element extended aperture (32:128PR only)
32-element extended aperture for 16:64PR and 16:128PR
128-element extended aperture for 64:128PR
Image ResolutionUp to 1024 × 1024 (1 M points) for each TFM group
Live TFM EnvelopeYes

Operating Environment

Ingress Protection RatingIP65 certified (completely protected against dust and water jets from all directions (6.3 mm nozzle))
Shockproof RatingDrop tested according to MIL-STD-810G
Intended UseIndoor and outdoor use
AltitudeUp to 2,000 m (6,561 ft)
Operating Temperature−10 °C to 45 °C (14 °F to 113 °F)
Storage Temperature−20 °C to 60 °C (−4 °F to 140 °F) (with battery inside)
−20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)

Housed in the field-proven rugged and portable OmniScan X3 enclosure, the OmniScan X3 64 flaw detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.
$13,200.00
Used Olympus EPOCH 650 Ultrasonic Flaw Detector - Sale !! (EPOCH 650)
The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use. 

The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.

The EPOCH 650 Digital Ultrasonic Flaw Detector combines Olympus’ industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 650 flaw detector’s blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use.

The EPOCH 650 is designed for use in nearly any inspection environment, from bench top testing in a laboratory to extreme outdoor and hazardous conditions. Designed for IP rating in either knob (IP66) or navigation pad (IP67) configurations, and tested to very high environmental and reliability standards, the EPOCH 650 allows users in any inspection environment to feel confident in both the performance and durability of the instrument.

Key Features

Designed to meet the requirements of ISO 22232-1
PerfectSquareTM tunable square wave pulser
Full screen A-scan mode
Digital high dynamic range receiver
Thirty digital filters for enhanced signal-to-noise ratio
2 kHz PRF for rapid scanning
Knob or navigation pad adjustment configurations
Large, full VGA sunlight readable display
15 hours of battery life
Standard dynamic DAC/TCG and onboard DGS/AVG
Multiple on-board report formats
MicroSD memory card for data transfers
Optional Corrosion Module software with Encoded B-scan
USB On-The-Go (OTG) for PC communication
Alarm and VGA outputs
Optional analog output

SPECS :

Instrument Inputs/Outputs

USB Ports    USB On-The-Go (OTG)
RS-232 Port    Yes
Video Output    VGA output standard
Analog Output    1 analog output (optional), Selectable 1 V/10 V Full Scale, 4mA max
Alarm Output    3 alarm outputs, 5 V TTL, 10 mA
Trigger I/O    Trigger input, 5V TTL;
Trigger output, 5V TTL, 10 mA max
Encoder Inputs    1-axis encoder line (quadrature - Corrosion Module mode only)

Environmental Ratings

IP Rating
    
Designed to meet the standards of the Ingress Protection (IP) rating number IP67 (navigation pad version) or IP66 (knob version) per IEC 60529-2004 (Degrees of Protection provided by enclosures – IP Code).
The product design was confirmed to meet the IP rating by means of Olympus internal design verification test process that occurs prior to the release of the product to production.

Explosive Atmosphere    
Safe operation as defined by Class I, Division 2, Group D, as defined in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL-STD-810F, Method 511.4, Procedure I.

Shock Tested
MIL-STD-810F, Method 516.5 Procedure I, 6 cycles each axis, 15g, 11 ms half sine.

Vibration Tested
MIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, general exposure: 1 hour each axis

Operating Temperature
–10 °C to 50 °C (14 °F to 122 °F)

Battery Storage Temperature
0 °C to 50 °C (32 °F to 122 °F)

General

Overall dimensions (W x H x D)    236 mm x 167 mm x 70 mm (9.3 in. x 6.57 in. x 2.76 in.)
Weight    1.6 kg (3.5 lb), including lithium-ion battery
Keypad    English, International, Japanese, Chinese
Languages    English, Spanish, French, German, Japanese, Chinese, Portuguese, Russian
Transducer connections    BNC or Number 1 LEMO
Data storage    100,000 IDs onboard, removable 2 GB MicroSD card (standard)
Battery type    Single lithium-ion rechargeable standard
Battery life    15 h to 16 h (lithium-ion)
Power requirements    AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 HZ to 60 Hz
Display type    Full VGA (640 x 480 pixels) transflective color LCD, 60 Hz update rate
Display dimensions (W x H, Diag.) 117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)

Receiver

Gain    0 to 110 dB
Maximum input signal    20 V p-p
Receiver input impedance    400 Ω ± 5%
Receiver bandwidth    0.2 MHz to 26.5 MHz at -3 dB
Digital filter settings    Thirty digital filter sets standard 
Seven ISO 22232-1:2020 compliant filters (0.2-10 MHz, 2.0-21.5 MHz, 8.0-26.5 MHz, 0.5-4 MHz, 0.2-1.2 MHz, 1.5-8.5 MHz, 5-15 MHz)
Rectification    Full-wave, Positive Half-wave, Negative Half-wave, RF
System linearity    Horizontal: ± 0.5% FSW
Resolution    0.25% FSH, amplifier accuracy ± 1dB
Reject    0 to 80% FSH with Visual Warning
Amplitude measurement    0 to 110% full screen height with 0.25% resolution
Measurement rate    Equivalent to PRF in all modes

Calibration

Automated calibration    Velocity, Zero Offset
Straight Beam (First Backwall or Echo-to-Echo)
Angle Beam (Soundpath or Depth)
Test modes    Pulse Echo, Dual, or Through Transmission
Units    Millimeters, inches, or microseconds
Range    3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) @ 5,900 m/s (0.2320 in./μ)
Velocity    635 m/s to 15240 m/s (0.0250 in./µs to 0.6000 in./µs)
Zero offset    0 µs to 750 µs
Display delay    -59 mm to 13,401 mm (-2.320 in. to 526.97 in.) @ longitudinal velocity in steel
Refracted angle    0° to 90° in 0.1° increments

Gates

Measurement gates  2 fully independent gates for amplitude and TOF measurements
Gate start    Variable over entire displayed range
Gate width    Variable from Gate Start to end of displayed range
Gate height    Variable from 2 to 95% full screen height
Alarms    Positive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)

Measurements

Measurement display locations    5 locations available (manual or auto selection)
Gate (1, 2)    Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
Echo-to-Echo    Standard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurements    Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values
DAC/TCG    Standard
DAC points    Up to 50 points, 110 dB dynamic range
Special DAC modes    Custom DAC (up to 6 curves), 20-80% View
Curved surface correction    Standard OD or Bar correction for Angle Beam measurements
Corrosion (optional)    Zero-cross measurement algorithm, V-Path correction, Single or Echo-to-Echo, Encoded B-scan

Includes:

- Detector unit
- Charging cable
- mini USB cable
- User manual CD
- Getting started guide
- 2x sensor cable units part No. U8800185.
- accessory part M110-RM
- accessory part M112-RM.
- Blue plastic carry case.
- Users Manual

Also you can check product : Used Olympus Nortec 600D Eddy Current Flaw Detector - Sale !!

The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of ISO 22232-1 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and highest number of digital filters in its class can tackle nearly any application.
$1,750.00
Used Olympus EPOCH 600 Ultrasonic Flaw Detector - Sale !! (EPOCH 600)

The EPOCH 600 is mid-level, handheld ultrasonic flaw detector. Weighing only 1.68 kg (3.72 lb.), its horizontal case is built to withstand the rigors of very harsh environments. EN12668-1 plus features such as 400 V PerfectSquare tunable square wave pulser, digital filtering for enhanced signal-to-noise ratio.

The EPOCH 600 Digital Ultrasonic Flaw Detector combines Olympus' industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 600 flaw detector's blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use.

The large, full VGA transflective display combined with our patent-pending digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. Available in two hardware configurations, the EPOCH 600 offers you the choice to adjust parameters with a knob or with a navigation area on the keypad. The EPOCH 600 is designed to meet the requirements of EN12668-1 and allows a full range of standard and optional flaw detection features. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and digital filtering capabilities can tackle nearly any application.

Key Features

  • Designed to meet the requirements of EN12668-1
  • PerfectSquare™ tunable square wave pulser
  • Digital high dynamic range receiver
  • Eight digital filters for enhanced signal-to-noise ratio
  • 2 kHz PRF for rapid scanning
  • Knob or navigation pad adjustment configurations
  • Large, full VGA sunlight readable display
  • Long battery life, supporting lithium-ion or alkaline batteries
  • Standard dynamic DAC/TVG and onboard DGS/AVG
  • 2 GB MicroSD memory card for data transfers and storage
  • USB On-The-Go (OTG) for PC communication
  • Alarm and VGA outputs
  • Optional analog output

Included:

Olympus Epoch 600 unit 
Charging dock for battery
AC Adapter/Charger  
Power cord for charger  
User Documents 
Hard carrying case 
The EPOCH 600 is mid-level, handheld ultrasonic flaw detector. Weighing only 1.68 kg (3.72 lb.), its horizontal case is built to withstand the rigors of very harsh environments. EN12668-1 plus features such as 400 V PerfectSquare tunable square wave pulser, digital filtering for enhanced signal-to-noise ratio.
$1,500.00
Used GE Krautkramer USM 36 Ultrasonic Flaw Detector - Sale !! (USM 36)
GE's Krautkramer USM 36 is the latest development in GE’s USM range of flaw detectors. It combines the 21st century operating platform with the reliable and robust hardware of GE’s well-established Krautkramer portable flaw detection instruments. It incorporates a range of innovative flaw detection features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors globally.
 
Largest Viewable A-Scan  Display in its Class
• An important improvement in the Krautkramer USM 36 is  its large 7 inch screen, with an 800x480 pixel resolution. The entire area is available to display crispy A-scans, making  it the best in its class. Signals can be easily viewed and accurately interpreted, even in bright sunlight, with tired eyes at the end of a long working day. 
 
Flexible Data Reporting  and Storage 
• As well as easy-to-interpret the crispy A-scans, data reporting on the Krautkramer USM 36 can also include screen shots and A-scan videos, where A-scans can be recorded for subsequent analysis or to provide proof of inspection. All data is stored on a removable SD-card and reports can be in jpeg or BMP format.
 
Simple and Efficient Operation
• The Krautkramer USM 36 uses the familiar rotary knobs of previous models but the function keys have now been minimized into a simple, intuitive 6-key keyboard, allowing simple and efficient operation 
• Inspection set-up is also easy. Not only for technicians who have used USM Go or USM Go for previous inspections, as set-up data is transferable directly from these instruments, which share the same user interface. This commonality of interface also ensures a rapid learning curve for technicians familiar with the USM Go instruments.
 
Comprehensive Connectivity
• Connectivity is a major feature of the Krautkramer USM 36. Data can be stored on removable SD-card or USB memory stick, either for record purposes or to allow data sharing. A VGA connection allows the instrument’s display  to be shown on an external monitor or on a projector screen for training purposes.
 
Can be Used in the Harshest of Environments
• The Krautkramer USM 36 is fully protected against dust and water ingress to IP66 and can be operated in ambient temperatures from -10°C to 55°C. It can be used in sandy deserts, frozen wastes and in the humid tropics 
• The new flaw detector weighs just 2.2 kg and is battery- or mains- operated. Its Li-ion battery has an operating life of more than 13 hours, with an integrated battery charger for those longer shifts.
 
Available in Three Versions
• The versatile instrument is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate GE’s patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. 
 
Applications:
 
The Krautkramer USM 36 has been developed for day-to-day use throughout the industrial spectrum, from weld inspection and corrosion measurement in the power generation and petrochemical industries, to castings and forgings inspection and thickness measurement in the automotive, metals and aerospace sectors  to the inspection of special materials.
 
Weld Inspection in the Power Generation and  Petrochemical Industries Intuitive tools facilitate analysis and the use of color on the ultra-bright, 7 inch screen allows significant display benefits  during weld inspection: 
 
• Monitor gates and curves are displayed in various colors; 
• Messages and alarms are displayed in red; 
• A-scans can be displayed in different colors to assist comparison; 
• Color display of all parameters involved in flaw location, including sound path, surface distance, depth position and leg number; 
• GE’s patented color coded display of legs for angle beam inspection.
 
Precise Thickness Measurement in the Automobile Industry 
The Krautkramer USM 36 provides precise thickness measurement, as the sound path differences are measured very accurately at the peaks of an echo sequence. 
 
Corrosion Measurement in the Power Generation and Petrochemical Industries 
Corrosion measurement can be carried out using dual element probes, where the screen displays both the thickness measurement and the A-scan, ensuring maximum reliability. A minimum capture mode provides the thinnest measured reading at the end of a continuous scan. An auto-freeze function, which minimizes the probe’s surface contact time, is used for measuring structures and components with hot surfaces.
 
Inspection of Forgings 
The instrument’s Phantom Echo Detection technology is used in the inspection of fine grained and long work pieces to ensure accurate detection of flaws but not Ghost Echoes.
 
Inspection of Special Materials 
The powerful square wave pulser which is an available option for the Krautkramer USM 36 provides excellent penetration of difficult materials, such as those sometimes used in  the aerospace and automobile industries.

What's In The Box:

(1) Lithium Ion Rechargeable Battery Pack
(1) Lithium Ion Battery Charger /AC Power Supply
(1) SD Card (2 GB)
(1) USB Download Cable
(1) Transport Case
(1) Quick Reference Operating Card
(1) Operating Manual on CD
(1) Certificate Of Conformity


The USM 36 Ultrasonic Flaw Detector is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate Waygate's patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. Another feature included is the 7" screen that makes viewing A-Scans efficient, with signals being easily viewed even in bright sunlight as well as flexible data storage with removable SD cards or USB ports.
$1,320.00
New Olympus Nortec 600D Eddy Current Flaw Detector - Sale !! (Nortec 600D)

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.

The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator.

Reliable and Robust
Based on an already field-proven instrument case, the NORTEC 600 is built for endurance in harsh field conditions. Its casing’s durability and resistance to extreme weather makes the NORTEC 600 an instrument you can trust for any eddy current inspection job.

Key Features

  • Designed to meet the requirements of IP66.
  • EN-15548 compliant.
  • Long battery life (up to 10 hours).
  • Bright, 5.7 inch (14,5 cm) VGA display.
  • Full-screen option in any display mode.
  • Improved filters for rotary scanner mode.
  • Intuitive interface with Application Selection presets.
  • All-settings configuration page.
  • 10 Hz to 12 MHz frequency capacity.
  • Automatic internal balancing (BNC connector).
  • Up to two real-time readings.
  • True automatic mixing.
  • Storage capacity of up to 500 files (program and data).
  • On-board file preview.

Portable and Lightweight

The NORTEC 600 weighs only 1.6 kg and is delivered with a factory-installed hand strap that provides direct thumb access to the key controls, offering genuine handheld versatility to operators.

Portable and Lightweight

Versatility and Compatibility

Four Models for All Your Needs

The NORTEC® 600 is available in four versatile instrument models to meet the widest range of inspection needs. From the basic model upward, each unit unlocks more features. For maximum convenience, additional features can also be unlocked remotely.

Versatility and Compatibility Versatility and Compatibility

Supported feature or modeN600 (basic)N600C (conductivity)N600S (scanner)N600D (dual freq.)
Signal calibration in Freeze mode
Real-time readings
Application Selection
All-in-one display
PowerLink probe support
Conductivity and coating thickness measurement

√*
Rotary scanner

Dual frequency and mixing

*One conductivity probe 9222340 [U8690027], standard 9522103 [U8880111] and calibration shims 0320806 [U8840160] included.

Two Probe Connectors

Two Probe Connectors

All models of the NORTEC 600 come with the standard LEMO 16-way universal connector, as well as a BNC connector for absolute probes. Simply select the connector in the instrument interface. When reading from the BNC connector, the instrument features automatic internal balancing for hassle-free operation.

The 16-way LEMO connector also supports the PowerLink NORTEC technology, which features automatic probe recognition and instrument presets for quicker setups.

Compatible with Current Procedures and Other Manufacturers

To simplify inspection, the NORTEC 600 includes all the legacy modes and layouts used in existing NORTEC-specified procedures, as well as those used by many other equipment manufacturers. Standard impedance plane view, sweep mode (strip chart), split screens, adjustable null point, crosshairs, improved filter response, reference signal display, and several other useful features are all part of the NORTEC 600 package.

Offering compatibility with many other probe and rotary scanner manufacturers, the NORTEC 600’s accessories include cables and adaptors such as a 12-way LEMO, an 11-way Fischer, and more. The proper adaptor or scanner cable make it possible to benefit from all the outstanding capabilities of the NORTEC 600, without investing heavily in probes and accessories.
 

One of the Most Brilliant Displays in the Industry

Vibrant VGA Display

The NORTEC® 600 has one of the most brilliant displays available on the portable eddy current flaw detector market. The unique brightness, resolution, and definition of its 5.7 inch VGA display makes it possible to interpret eddy current signals at a distance. The user-selectable color schemes ensure that the display is equally clear and easy-to-read whether you are using the NORTEC 600 indoors or outside.


True Full-Screen Display

In addition to impressive size and brightness, the NORTEC 600’s VGA display also features a new full-screen mode that can be activated at the touch of a key.

Available for all applications and in all display modes, the full-screen mode really comes in handy when reading signals over an extended period of time.

Depending on your NORTEC 600 model, you can choose between the following displays:

  • single impedance plane.
  • dual impedance plane.
  • sweep (strip chart).
  • split screen (sweep impedance).
  • waterfall.
  • dual impedance plane.
  • all-in-one display featuring up to 3 configurable traces.


Vibrant VGA Display

True Full-Screen Display


Easy Integration of NORTEC 600

The NORTEC® 600 merges seamlessly into any integrated eddy current detection system. Its numerous software and hardware features ensure that the instrument is capable of performing consistent flaw detection in industrial environments. The NORTEC 600 specifications and functionalities were designed with the integrator in mind.

  • Designed to meet the requirements of IP66.
  • -10°C to 50°C operating temperature range.
  • Continuous null filter.
  • Strip chart view with sweep alarm.
  • 6 kHz measurement rate.
  • Remote Control from NORTEC PC.
  • Alarm outputs.
  • Analog outputs.
  • Digital inputs.










SPECS : 

HousingOverall dimensions (width × height × depth)236 mm × 167 mm × 70 mm
Weight1.7 kg, including lithium-ion battery.
Standards or directivesEN-15548, CE, WEEE, FCC (USA), IC (Canada), RoHS (China), RCM (Australia and New Zealand).
Power requirementsAC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz.
Input and OutputsOne USB 2.0 peripheral port, one standard VGA analog output port, one 15-pin I/O port (male) with 6 analog outputs, 3 alarm outputs.
Environmental conditionsOperating temperature–10 °C to 50 °C
Storage temperature0°C to 50°C (with batteries) and -20°C to 70°C (without batteries).
IP ratingDesigned to meet requirements of IP66.
BatteryBattery typeSingle lithium-ion rechargeable battery or optional AA-size alkaline batteries (in 8-cell holder).
Battery lifeUp to 10 hours for standard operation; 6 hours to 8 hours when operating rotary scanners.
DisplayDisplay size (W × H, diagonal)117.4 mm × 88.7 mm, 146.3 mm
Display typeFull VGA (640 × 480 pixels) color, transflective LCD (liquid crystal display).
Screen modesNormal or Full screen, 8 color schemes.
Grids and display toolsChoice of 5 grids; crosshairs (single trace displays only).
Connectivity and memoryPC softwareNORTEC PC software, included in base NORTEC 600 kit. NORTEC PC allows viewing saved files and printing reports.
Data storage500 traces of 120 s max featuring user-selectable on-board preview.
InterfaceLanguagesEnglish, Spanish, French, German, Italian, Japanese, Chinese, Russian, Portuguese, Polish, Dutch, Czech, Hungarian, Swedish, and Norwegian.
ApplicationsApplication Selection menu for easy and rapid configuration. Automatic lift-off key.
Real-Time ReadingsChoice of up to 2 real-time readings measuring signal characteristics (selection of 5 amplitude measurements and 1 angle measurement).
Eddy Current Specifications (all NORTEC models)Probe typesAbsolute and differential in either bridge or reflection configuration. The instrument is fully compatible with NORTEC PowerLink probes, as well as other main probe and accessory suppliers.
Probe connectors16-pin LEMO and BNC featuring internal automatic balancing for BNC connector (absolute probes).
Frequency range10 Hz to 12 MHz
Gain0 dB to 100 dB in 0.1 or 1 dB increments.
Rotation0° to 359.9° in 0.1° or 1° increments.
SweepVariable from 0.005 s to 10 s per division
(total of 13.3 divisions with FINE grid).
FiltersLow-pass: 10 Hz to 2000 Hz and wide band. High-pass: off or 5 Hz to 1000 Hz, user-selectable in constant “figure 6” or “figure 8” filter type. Continuous null (low-frequency HP filter): 0.2 Hz, 0.5 Hz, 1.0 Hz.
Probe driveLOW, MEDIUM, and HIGH (2 V, 5 V, 8 V).
Display erase, persistenceDisplay erase (0.1 s to 60 s), persistence (0.1 s to 10 s)
Available alarm types3 simultaneous alarms. Choices include BOX (rectangle), POLAR (circle), SECTOR (pie), SWEEP (time-based), CONDUCTIVITY, and COATING THICKNESS.
Conductivity (NORTEC 600C, NORTEC 600S, and NORTEC 600D)Frequency60 kHz or 480 kHz
Digital conductivity specificationDigital conductivity display from 0.9% to 110% IACS or 0.5 to 64 MS/m. Accuracy within ±0.5% IACS from 0.9% to 65% IACS and within ±1.0% of values over 62%. Meets or exceeds BAC 5651 specifications.
Non-conductive coating thicknessCan measure non-conductive coating thickness from 0 mm to 0.648 mm. Accuracy of 0.025 mm (±0.001 in.) over a 0 mm to 0.64 mm range.
Scanners (NORTEC 600S and NORTEC 600D)Scanner compatibilityOperates Olympus scanners (MiniMite, SpitFire, RA-2000, and PS-5) and other major supplier scanners, from 120 RPM to 3000 RPM.
Dual Frequency (NORTEC 600D)Frequency adjustment (dual frequency mode)Two fully independent frequencies, operating in simultaneous injection.
MIX optionsF1 - F2, F1 F2, and automatic true mixing.

If you work in explosive atmospheres, the NORTEC 600 Ex flaw detector conforms to the requirements of the ATEX directive. For more information, read our FAQ on the ATEX directive..

Standard Inclusions

The NORTEC® 600 is available in any of the following configurations:

Model: Basic, Conductivity (C), Scanner (S), and Dual Frequency (D).

Power cord: Over 11 power cord models available (for the DC charger).

Keypad and instruction label: English, international (icons), Chinese, or Japanese.

“Getting Started” print manual: over 9 languages available.

Items included in all NORTEC 600 models*: NORTEC 600 instrument with factory-installed hand strap, getting started manual, factory certificate, rigid transport case, DC charger with power cord, Li-Ion battery, AA battery tray, USB communication cable, MicroSD memory card and adaptor, and NORTEC PC software and product manuals disc.

*Standard inclusions may vary depending on your location. Contact your local distributor.

Additional items included in NORTEC 600C model only: 19 mm, 60 kHz conductivity probe, conductivity calibration standard (set of 2: 29% and 59%), and calibration shims.

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
$1,650.00
Used Olympus Nortec 600D Eddy Current Flaw Detector - Sale !! (Nortec 600D)

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.

The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator.

Reliable and Robust
Based on an already field-proven instrument case, the NORTEC 600 is built for endurance in harsh field conditions. Its casing’s durability and resistance to extreme weather makes the NORTEC 600 an instrument you can trust for any eddy current inspection job.

Key Features

  • Designed to meet the requirements of IP66.
  • EN-15548 compliant.
  • Long battery life (up to 10 hours).
  • Bright, 5.7 inch (14,5 cm) VGA display.
  • Full-screen option in any display mode.
  • Improved filters for rotary scanner mode.
  • Intuitive interface with Application Selection presets.
  • All-settings configuration page.
  • 10 Hz to 12 MHz frequency capacity.
  • Automatic internal balancing (BNC connector).
  • Up to two real-time readings.
  • True automatic mixing.
  • Storage capacity of up to 500 files (program and data).
  • On-board file preview.

Portable and Lightweight

The NORTEC 600 weighs only 1.6 kg and is delivered with a factory-installed hand strap that provides direct thumb access to the key controls, offering genuine handheld versatility to operators.

Portable and Lightweight

Versatility and Compatibility

Four Models for All Your Needs

The NORTEC® 600 is available in four versatile instrument models to meet the widest range of inspection needs. From the basic model upward, each unit unlocks more features. For maximum convenience, additional features can also be unlocked remotely.

Versatility and Compatibility Versatility and Compatibility

Supported feature or modeN600 (basic)N600C (conductivity)N600S (scanner)N600D (dual freq.)
Signal calibration in Freeze mode
Real-time readings
Application Selection
All-in-one display
PowerLink probe support
Conductivity and coating thickness measurement

√*
Rotary scanner

Dual frequency and mixing

*One conductivity probe 9222340 [U8690027], standard 9522103 [U8880111] and calibration shims 0320806 [U8840160] included.

Two Probe Connectors

Two Probe Connectors

All models of the NORTEC 600 come with the standard LEMO 16-way universal connector, as well as a BNC connector for absolute probes. Simply select the connector in the instrument interface. When reading from the BNC connector, the instrument features automatic internal balancing for hassle-free operation.

The 16-way LEMO connector also supports the PowerLink NORTEC technology, which features automatic probe recognition and instrument presets for quicker setups.

Compatible with Current Procedures and Other Manufacturers

To simplify inspection, the NORTEC 600 includes all the legacy modes and layouts used in existing NORTEC-specified procedures, as well as those used by many other equipment manufacturers. Standard impedance plane view, sweep mode (strip chart), split screens, adjustable null point, crosshairs, improved filter response, reference signal display, and several other useful features are all part of the NORTEC 600 package.

Offering compatibility with many other probe and rotary scanner manufacturers, the NORTEC 600’s accessories include cables and adaptors such as a 12-way LEMO, an 11-way Fischer, and more. The proper adaptor or scanner cable make it possible to benefit from all the outstanding capabilities of the NORTEC 600, without investing heavily in probes and accessories.
 

One of the Most Brilliant Displays in the Industry

Vibrant VGA Display

The NORTEC® 600 has one of the most brilliant displays available on the portable eddy current flaw detector market. The unique brightness, resolution, and definition of its 5.7 inch VGA display makes it possible to interpret eddy current signals at a distance. The user-selectable color schemes ensure that the display is equally clear and easy-to-read whether you are using the NORTEC 600 indoors or outside.


True Full-Screen Display

In addition to impressive size and brightness, the NORTEC 600’s VGA display also features a new full-screen mode that can be activated at the touch of a key.

Available for all applications and in all display modes, the full-screen mode really comes in handy when reading signals over an extended period of time.

Depending on your NORTEC 600 model, you can choose between the following displays:

  • single impedance plane.
  • dual impedance plane.
  • sweep (strip chart).
  • split screen (sweep impedance).
  • waterfall.
  • dual impedance plane.
  • all-in-one display featuring up to 3 configurable traces.


Vibrant VGA Display

True Full-Screen Display


Easy Integration of NORTEC 600

The NORTEC® 600 merges seamlessly into any integrated eddy current detection system. Its numerous software and hardware features ensure that the instrument is capable of performing consistent flaw detection in industrial environments. The NORTEC 600 specifications and functionalities were designed with the integrator in mind.

  • Designed to meet the requirements of IP66.
  • -10°C to 50°C operating temperature range.
  • Continuous null filter.
  • Strip chart view with sweep alarm.
  • 6 kHz measurement rate.
  • Remote Control from NORTEC PC.
  • Alarm outputs.
  • Analog outputs.
  • Digital inputs.










SPECS : 

HousingOverall dimensions (width × height × depth)236 mm × 167 mm × 70 mm
Weight1.7 kg, including lithium-ion battery.
Standards or directivesEN-15548, CE, WEEE, FCC (USA), IC (Canada), RoHS (China), RCM (Australia and New Zealand).
Power requirementsAC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz.
Input and OutputsOne USB 2.0 peripheral port, one standard VGA analog output port, one 15-pin I/O port (male) with 6 analog outputs, 3 alarm outputs.
Environmental conditionsOperating temperature–10 °C to 50 °C
Storage temperature0°C to 50°C (with batteries) and -20°C to 70°C (without batteries).
IP ratingDesigned to meet requirements of IP66.
BatteryBattery typeSingle lithium-ion rechargeable battery or optional AA-size alkaline batteries (in 8-cell holder).
Battery lifeUp to 10 hours for standard operation; 6 hours to 8 hours when operating rotary scanners.
DisplayDisplay size (W × H, diagonal)117.4 mm × 88.7 mm, 146.3 mm
Display typeFull VGA (640 × 480 pixels) color, transflective LCD (liquid crystal display).
Screen modesNormal or Full screen, 8 color schemes.
Grids and display toolsChoice of 5 grids; crosshairs (single trace displays only).
Connectivity and memoryPC softwareNORTEC PC software, included in base NORTEC 600 kit. NORTEC PC allows viewing saved files and printing reports.
Data storage500 traces of 120 s max featuring user-selectable on-board preview.
InterfaceLanguagesEnglish, Spanish, French, German, Italian, Japanese, Chinese, Russian, Portuguese, Polish, Dutch, Czech, Hungarian, Swedish, and Norwegian.
ApplicationsApplication Selection menu for easy and rapid configuration. Automatic lift-off key.
Real-Time ReadingsChoice of up to 2 real-time readings measuring signal characteristics (selection of 5 amplitude measurements and 1 angle measurement).
Eddy Current Specifications (all NORTEC models)Probe typesAbsolute and differential in either bridge or reflection configuration. The instrument is fully compatible with NORTEC PowerLink probes, as well as other main probe and accessory suppliers.
Probe connectors16-pin LEMO and BNC featuring internal automatic balancing for BNC connector (absolute probes).
Frequency range10 Hz to 12 MHz
Gain0 dB to 100 dB in 0.1 or 1 dB increments.
Rotation0° to 359.9° in 0.1° or 1° increments.
SweepVariable from 0.005 s to 10 s per division
(total of 13.3 divisions with FINE grid).
FiltersLow-pass: 10 Hz to 2000 Hz and wide band. High-pass: off or 5 Hz to 1000 Hz, user-selectable in constant “figure 6” or “figure 8” filter type. Continuous null (low-frequency HP filter): 0.2 Hz, 0.5 Hz, 1.0 Hz.
Probe driveLOW, MEDIUM, and HIGH (2 V, 5 V, 8 V).
Display erase, persistenceDisplay erase (0.1 s to 60 s), persistence (0.1 s to 10 s)
Available alarm types3 simultaneous alarms. Choices include BOX (rectangle), POLAR (circle), SECTOR (pie), SWEEP (time-based), CONDUCTIVITY, and COATING THICKNESS.
Conductivity (NORTEC 600C, NORTEC 600S, and NORTEC 600D)Frequency60 kHz or 480 kHz
Digital conductivity specificationDigital conductivity display from 0.9% to 110% IACS or 0.5 to 64 MS/m. Accuracy within ±0.5% IACS from 0.9% to 65% IACS and within ±1.0% of values over 62%. Meets or exceeds BAC 5651 specifications.
Non-conductive coating thicknessCan measure non-conductive coating thickness from 0 mm to 0.648 mm. Accuracy of 0.025 mm (±0.001 in.) over a 0 mm to 0.64 mm range.
Scanners (NORTEC 600S and NORTEC 600D)Scanner compatibilityOperates Olympus scanners (MiniMite, SpitFire, RA-2000, and PS-5) and other major supplier scanners, from 120 RPM to 3000 RPM.
Dual Frequency (NORTEC 600D)Frequency adjustment (dual frequency mode)Two fully independent frequencies, operating in simultaneous injection.
MIX optionsF1 - F2, F1 F2, and automatic true mixing.

If you work in explosive atmospheres, the NORTEC 600 Ex flaw detector conforms to the requirements of the ATEX directive. For more information, read our FAQ on the ATEX directive..

Standard Inclusions

The NORTEC® 600 is available in any of the following configurations:

Model: Basic, Conductivity (C), Scanner (S), and Dual Frequency (D).

Power cord: Over 11 power cord models available (for the DC charger).

Keypad and instruction label: English, international (icons), Chinese, or Japanese.

“Getting Started” print manual: over 9 languages available.

Items included in all NORTEC 600 models*: NORTEC 600 instrument with factory-installed hand strap, getting started manual, factory certificate, rigid transport case, DC charger with power cord, Li-Ion battery, AA battery tray, USB communication cable, MicroSD memory card and adaptor, and NORTEC PC software and product manuals disc.

*Standard inclusions may vary depending on your location. Contact your local distributor.

Additional items included in NORTEC 600C model only: 19 mm, 60 kHz conductivity probe, conductivity calibration standard (set of 2: 29% and 59%), and calibration shims.

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—The new NORTEC 600D. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600D is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
$1,200.00
Used GE Krautkramer USM 35X Ultrasonic Flaw Detector Lemo Version - Sale !! (USM 35X)

The Instrument driver for USM 35X is required to exchange data and settings between the instrument USM 35X and the software AMPLECTOR Instrument Manager. All versions are supported USM 35X, USM 35X DAC, USM 35X S, USM 35X SD and instrument options (DAC/TCG, DGS, Data Logger with 3rd gate). 

Instrument data supported by the Instrument driver USM 35X: Instrument settings (ultrasonic parameters), A-scans, test results, and Data Recorder file types "Linear" and “Grid”.

Features

  • Straightforward display (as in Windows Explorer) of dataset files of the USM 35X in the AMPLECTOR Instrument Manager with detailed display of the most important instrument settings (ultrasonic parameters), A-scan and measurement values with extended information parameters
  • Straightforward display of Data Recorder files (as in Windows Explorer) with detailed display of Data Recorder type, statistics, as well as instrument settings and notes
  • Display of instrument information (for example software version)
  • Import and export of dataset files
  • The thickness alarm values (lower and upper threshold of the material thickness) can be subsequently set and changed in the AMPLECTOR Instrument Manager

Requirements

  • Operating system Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
  • Microsoft .NET Framework 4.5 or higher
  • Installed software AMPLECTOR Instrument Manager
  • Cable with RS-232-USB adapter for the connection between the instrument and the computer (not included in the standard package)

Standard package

  • Instrument driver software as download (no shipment on data media)
  • No Quick Start Guide necessary

Tips for the operating and use

  • The RS232-USB adapter must be set to COM 3
  • The instrument must be set to data transfer rate of 57600 baud
  • The AMPLECTOR Instrument Manager and the instrument driver can only display and edit the data and information from the instrument at the quality which was originally saved
  • The stability and quality of communication between the AMPLECTOR Instrument Manager and the instrument are based on the transmission method of the instrument manufacturer
  • AMPLECTOR Instrument Manager and the instrument driver do not support any server and remote control mode


Synchronics Provides Expert Electronic Repairs For KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector At Synchronics we have the experience in repairing KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector in a timely and cost effective manner. We provide free Quote for KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector sent to us for repair at our works. We provide an OEM level of quality service at a competitive, non-OEM price. We have the ability to repair and calibrate many KRAUTKRAMMER units from many different Manufacturers. With our state-of-the-Art technologies and dedicated technicians, our staff is able to ease the pain of any repair service order.
$1,015.00
New Proceq FD100 PA 16:64 Flaw Detector - Sale !! (FD100 PA 16:64)
Flexible high-tech ultrasonic inspection offering an extremely comprehensive measurement solution

Compatibility
Proceq offers the possibility to order customized accessories such as probes, wedges and calibration blocks so that our solution is tailor-made to your need.

Ease of use
Plug-and-play compatibility with a wheel probe for fast and efficient corrosion mapping or large composites inspection.

Productivity
C-scans can be displayed in amplitude or depth. With merged C-scans, data is displayed for all inspection passes in the same view.

Tech Specs

Display
TFT 8.4"

File Size
Up to 3 GB

Report Generation
Customisable pdf report, PNG screen capture, CSV file output option

Encoder
1 or 2 axis (quadrature input)

Languages
English, German, French, Spanish, Russian, Chinese, Hungarian, Italian, Portuguese, and Japanese

Sensor / Instrument

Configuration
2 UT & 1 l-PEX Channels

Transducer Socket
Lemo1 - BCD
I-PEX

Pulse Voltage
25 to 75 V (in 5 V steps)

PRF
1 to 5000 Hz

Gain Range
PA: 76 dB (0.1 dB steps)

Bandwidth
PA: 200 KHz to 14 MHz
UT 200 KHz to 22 MHz

Display
TFT 8.4"

Signal Enhancement
Digital filters, smoothing, contouring, rejection, averaging

Architecture
16 active, multiplexed over 64 channels

Digitizing Frequency
65 MHz

Focal Laws
128

Maximum A Scan Length
4096

Supported Scans
A, B, C, L, S-Scan, Merged, true Top & End

Number of Scans
1 (with up to 3 extracted A scans)

Number of Layouts
35

Measurements
Path length, depth, surface distance, DAC, AWS, DGS, TGS

File Size
Up to 3 GB

Report Generation
Customisable pdf report, PNG screen capture, CSV file output option

Encoder
1 or 2 axis (quadrature input)

Languages
English, German, French, Spanish, Russian, Chinese, Hungarian, Italian, Portuguese, and Japanese

Battery Life
6 Hrs

IP rating
IP66
Metal and composite flaw detection using ultrasound Compatible with any 64-element linear phased array probe Simple 30 second configuration C-scans can be displayed in amplitude or depth
$1,100.00
New Proceq FD100 UT Ultrasonic Flaw Detector - Sale !! (FD100 UT)

A flexible and portable high tech Ultrasonic Flaw detector for metal of all types. Fully compatible with a very wide array of conventional and both focused and unfocused phased array probes. Offering technicians most of the popular flaw sizing techniques including DGS, DAC, AVG, TGC and AWS. Thanks to the A, B, C, True Top and End scans imaging capabilities, users can address many applications from one instrument. 3D scan plans assist in creating inspection procedures and analysing the results.

The Proceq Flaw Detector features best in class User Experience that is unmatched using grouped options on screen, shortcut keys and a click-wheel for fast navigation and easy setup, calibration, and analysis enabling faster detection of flaws and other hidden properties in the part inspected. It features settings that can be saved and re-used, the wizards and option specific help allowing for fast configuration.

Housed in a rugged IP66 rated housing with advanced features aimed at faster identification and simplifying reporting. Available in 4 options, with the Proceq Flaw Detector 100UT as the base model. Can be upgraded from base model to TOFD & PA on field anytime. Making it the instrument of choice by many technicians.

Advantages of using ultrasonic technique for inspection include:

  • Requires less preparation of test surfaces than other NDT methods.
  • With the use of different techniques, high sensitivity can be achieved on surface and sub-surface flaws.
  • The use of high frequencies achieves excellent sensitivity for detection of flaws perpendicular to the axis of wave propagation.
  • The use of lower frequencies allows for penetration that is superior to any other NDT method.
  • Multiple applications and techniques can be achieved by simply swapping transducers. Ultrasonics is one of the most versatile techniques available.
  • Access to only one face of the material required when using a Pulse-Echo method for flaw detection.
  • Determining the reflector’s (flaw) position, shape and size in the object tested is highly accurate with a skilled operator.
  • High resolution images provide instant results making report generation simple and effective.
  • Testing can be automated, and reports generated continuously for production type environments. 

Applications:

Users can perform many applications Including:

  • Ultrasonic Thickness Surveys
  • Corrosion detection and measurement
  • Flaw detection in welds, castings and forgings
  • Pipeline weld inspection projects
  • Complex geometries
  • Forgings and castings
  • Aircraft composites delamination

For efficient weld inspection, Proceq offers both focused and unfocused PA scan options. 

Standards:

  • AS 2207 - 2007: Non-Destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel.
  • AS 2452.3 -2005: Non-destructive testing - Determination of thickness
  • AS 1065 - 1988: Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings
  • ASME BPVC Section V -2017, Article 4: Ultrasonic Examination methods for welds
  • ASME BPVC Section V -2017, Article 5: Ultrasonic Examination methods for materials
  • AWS D1.1/D1.1M:2015 - Clause 6, 6.13 UT.
  • BS EN 12668-1:2010: Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments.
  • BS EN 15317:2013: Non-Destructive Testing. Ultrasonic testing. Characterization and Verification of ultrasonic thickness measuring equipment.
  • BS EN IS 18563-1: Non-Destructive Testing. Characterization and verification of ultrasonic phased array equipment. Instruments. 

Features:

  • The basic UT model can be upgraded with the Ultrasonic Time of Flight Diffraction (TOFD) and Phased Array (PA) modes anytime and anywhere on-site.
  • The instrument offers technicians an extremely comprehensive measurement solution and features all popular flaw sizing techniques such as DGS/AVG, DAC, TCG and AWS.
  • Featured with 3D scan plans which help to create inspection procedures and to analyse the results.
  • Settings can be saved and re-used, the wizards and option specific help allow fast configuration.
  • Ability to bring down the bandwidth to 200 kHz for testing attenuative materials.
  • Sensitive amplifiers can make TOFD inspections possible without preamp and all models have 2 axes encoding.
  • Protected by a rugged IP 66 cover.
  • User-friendly interface. 

Software: 

Proceq FD Link Software for preparation, setup and reporting. Key features include: 

  • Create layout for data collection and new layers / customize the layout
  • Review data / add markers / extract box / extract view
  • Add free measurements and create images for reports
  • Show defective position using the 3D tool kit and add notes
  • Produce, open and review a PDF report
  • Export data from Amplitude Top / C-Scan as .csv file 

Benefits:

  • Fully compatible with a very wide range of conventional and phased array probes
  • Customisable screen with selectable layouts
  • Best in class user experience, featuring wizards and option specific help for fast configurations and analysing results
  • Best in class software and reporting
  • Lightweight for single handed operation
  • Field upgradeable from base model to TOFD, PA 16:16 & PA 16:64
  • All models feature dual axes encoding 

Industries:

  • Oil & Gas
  • Aerospace
  • Automotive
  • Railways
  • Machine Parts
  • Training & Research
A flexible and portable high tech Ultrasonic Flaw detector for metal of all types. Fully compatible with a very wide array of conventional and both focused and unfocused phased array probes. Offering technicians most of the popular flaw sizing techniques including DGS, DAC, AVG, TGC and AWS. Thanks to the A, B, C, True Top and End scans imaging capabilities, users can address many applications from one instrument. 3D scan plans assist in creating inspection procedures and analysing the results.
$1,425.00
Used Olympus EPOCH 6LT Portable Flaw Detector - Sale !! (EPOCH 6LT)

The EPOCH 6LT portable flaw detector combines the functionality of a powerful ultrasonic flaw detection device with a form factor designed to thrive in rope access and high portability applications. This flaw detector is a rugged instrument that delivers user comfort and more uptime. The unit weighs just 1.95 pounds (890 g) with a grip-oriented weight distribution for one-handed operation with minimal wrist fatigue, and rotary knob and simple button design make it easy to use, even when wearing gloves.

The EPOCH 6LT flaw detector’s workflow is simple and straightforward. Despite the instrument’s small size, it has the features and functions to meet the requirements of nearly any conventional ultrasonic inspection application.

Based on the same digital architecture as the EPOCH 650 flaw detector, the EPOCH 6LT flaw detector provides flexible, powerful pulsing and receiving features to accommodate the needs of most flaw detection inspections.

General

User Interface Languages
English, Spanish, French, German, Japanese, Chinese, Portuguese, Russian, Italian
Transducer Connections LEMO 00
Data Storage 100,000 IDs onboard
Battery Type and Life Single lithium-ion rechargeable standard; 6 h life
Power Requirements AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
Display Type Full VGA (640 × 480 pixels) transflective color LCD, 60 Hz update rate
Display Dimensions (W × H, Diag.) 117 mm × 89 mm, 146 mm (4.62 in. × 3.49 in., 5.76 in.)
Overall Dimensions (W × H × D) 209 mm x 128 mm x 36 mm, 58 mm at hand grip (8.2 in. x 5 in. x 1.4 in., 2.3 in. at hand grip)
Weight 890 g (1.95 lb), including lithium-ion battery

Instrument Inputs/Outputs
USB Ports (1) USB 1.1 Full Speed Host (Type A)
(1) USB 2.0 Full Speed Client (Type Mini B)
Video Output 1 digital video output

Environmental Ratings
IP Rating Ingress Protection (IP) engineered to IP67 (dust tight and water submersion) and IP65 (dust tight and water jets) per IEC 60529-2004 (Degrees of Protection provided by enclosures—IP Code). The product rating is confirmed by means of Olympus’ internal design verification test process.
Explosive Atmosphere MIL-STD-810F, Method 511.4, Procedure 1.
Shock Tested MIL-STD-810F, Method 516.5, Procedure I, 6 cycles each axis, 15 g, 11 ms half sine.
Vibration Tested MIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, general exposure: 1 hour each axis.
Operating Temperature -10 °C to 50 °C (14 °F to 122 °F)
Battery Storage Temperature 0 °C to 50 °C (32 °F to 122 °F)

Pulser
Pulser Turnable square wave
PRF 10 Hz to 2000 Hz in 10 Hz increments
Energy Settings 100 V, 200 V, 300 V, or 400 V
Pulse Width Adjustable from 25 nsec to 5,000 nsec (0.1 MHz) with PerfectSquare™ technology
Damping 50, 400 Ω

Receiver
Maximum Input Signal 20 Vp
Receiver Input Impedance 400 Ω ± 5%
Receiver Bandwidth DC to 26.5 MHz at -3 dB (standard version)
0.2 to 26.5 MHz at -3 dB (EN12668 compliant version)
Digital Filter Settings 8 digital filter sets (standard version)
7 digital filter sets (EN12668 compliant version)
Rectification Full-Wave, Positive Half-Wave, Negative Half-Wave, RF
System Linearity Horizontal: ± 0.5% FSW
Resolution 0.25% FSH, Amplifier Accuracy /- 1dB
Reject 0 to 85% FSH in 1% increment positions
Amplitude Measurement 1.25% to 110% full screen height
Measurement Rate Equivalent to PRF in all modes (single shot)

Calibration
Automated Calibration Velocity, zero offset
Straight beam (first back wall or echo-to-echo)
Angle beam (sound path or depth)
Test Modes Pulse Echo, Dual, or Through Transmission
Units Millimeters, inches, or microseconds
Range 4.31 mm to 6,700 mm at 5,900 m/s (0.2320 in./μs)
Velocity 635 m/s to 15240 m/s (0.0250 in./μs to 0.6000 in./μs)
Zero Offset 0 to 750 μs
Display Delay -10 microseconds to 2203 microseconds
Refracted Angle 0° to 85° in 0.1° increments, then jump to 90°

Gates
Measurement Gates 2 fully independent flaw gates
Gate Start Variable over entire displayed range
Gate Width Variable over entire displayed range
Gate Height Variable from 2 to 95% full screen height in 1% increments
Alarms Positive and negative threshold/curve, minimum depth (gate 1 and gate 2)

Measurements
Measurement Display Locations 5 locations available (manual or auto selection)
GATE (1, 2) Thickness, sound path, projection, depth, amplitude, time-of-flight, min./max. depth, min./max. amplitude, sizing measurements based on mode
Measurement Display Locations User selects up to four measurements from either gate to display on the live screen.
Echo-to-echo Standard gate 2 – gate 1
DAC/TCG Standard, up to 50 points, 110 dB dynamic TCG range
Special DAC Modes Custom DAC (up to 6 curves), 20–80% view
Curved Surface Correction Standard OD or bar correction for angle beam measurements.



Don’t compromise on the inspection capabilities of your flaw detector. The EPOCH® 6LT portable flaw detector combines the functionality of a powerful ultrasonic flaw detection device with a form factor designed to thrive in rope access and high portability applications.
$1,350.00
Used GE KrautKramer USM GO Ultrasonic Flaw Detector - Sale !! (USM GO)
GE USM GO Ultrasonic Flaw Detector
The new ultrasonic Go platform from GE’s Inspection Technologies business combines a thickness gauge and a flaw detector in one single lightweight instrument.

Ergonomically Designed with the User in Mind
The USM Go ultrasonic portable flaw detector has been ergonomically designed to provide an instrument that is light, small and easy to use in the harshest of inspection environments

Features:
  • Portability
    • Small size, lightweight, robust, dust- and waterproof construction allow the instrument to be easily operated in confined spaces, areas of difficult access, and in harsh environments.
    • Can be operated with one hand, leaving other hand free for other tasks, such as maintaining probe in optimum position or holding on to ladders.
    • Light enough to be carried throughout a whole day’s shift.
    • Battery provides up to 6 hours operation. Can be recharged on- or off-board.
    • Several accessories to improve mobility are available: wrist strap, shoulder harness, belt holster.
  • Easy-to-Read Screen
    • A display screen that is the same size as those in other GE flaw detectors, even though the instrument is much smaller than other instruments in the range
    • An 800 x 480 pixel display, which is better resolution than a standard DVD.
    • A screen with an optimized aspect ratio to ensure highly defined echo separation.
    • A screen that can be easily viewed, whether hand-held or desk-mounted.
    • A screen that has been ergonomically sized to help reduce eyestrain.
    • An integrated stand allows the user to optimize the viewing angle, when the instrument is desk- or benchmounted
    • AutoGate Threshold for faster measurement with optimum accuracy.
    • A-scan freeze mode function (for gate A and B) fascilitates working in difficult ergonomic conditions.
    • Display measurement indicators show both amplitude and distance to reduce risk of error
  • Ease of Use
    • Pressure-sensitive joystick imported and adapted from the successful range of remote visual inspection and ultrasonic equipment offered by GE.
    • All controls within fingertip reach. User can dedicate function keys according to preference
    • A “Flip” function allows the instrument to be used equally well by left-handed and right-handed people.
    • A standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage.
    • The instrument’s 2 GB memory can be easily exchanged by SD cards up to 16 GB
    • Reports are produced in jpeg format so there is no need for special reading software.
    • Printable summary list of all parameters
    • Easy directory management on SD cards
    • Built-in menu customization tool allows to adapt the menu structure to two levels of users.
    • Smart notes function increases reporting efficiency.
    • Yearly calibration reminder for efficient quality management

Increasing Productivity
The USM Go features intuitive operation so there is virtually no time-consuming, learning curve.

You are productive from the moment you pick it up!

There is no need to refer to the manual, as clear instructions are provided as you go along. Navigation is simplified using the proven graphical user interface (GUI) and the innovative joystick, allowing one-handed operation for fast and accurate adjustment.

Other features allowing increased productivity are:
  • A robust molded rubber casing to withstand the harshest environments and significantly reduce downtime. The instrument is dust- and waterproof to IP67 and is tested to withstand shock and vibration
  • A simple on-board data logger to collect and save thickness measurements or eventually attach the corresponding A-scan image.
  • Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability.
  • Automatic Gate Threshold for the 2 gates ensuring accurate measurements made under the same conditions
  • Video recording upto 8 minutes allows live reporting.
High UT Performance
  • State-of-the-art electronics, including digital amplification, for a wide range of application benefits.
  • A wide Pulse Repetition Frequency range allows use at low PRF to inspect forged parts without any “ghost” echoes and to inspect welds at high PRF when fast and regular scanning movement is required.
  • Precise Time of Flight indication in µs.
  • TrueDGS compatible.
Versatile and Upgradeable
  • Customized versions of the USM Go are also available, specially adapted to meet specific inspection codes or applications. For example, an optional square wave pulser can be supplied for applications involving the inspection of highly attenuative material. The versions shown in the table are currently available. For more detailed information, please contact your local GE representative or visit www.ge-mcs.com.

A Wide Range of Applications
The USM Go has been designed to provide flaw detection capability in inspection situations throughout the industrial and process spectrum, from aerospace to power generation and from the automotive sector to the oil and gas industry.

These include:

Weld Inspection:
  • Trigonometric projections
  • AWS
  • DAC
  • DGS
Inspection of Forgings and Castings:
  • Manual PRF adjustment
  • Phantom echo indicator
  • DGSS
  • Backwall Echo Attenuator (BEA)
Inspection of rails:
  • High PRF (up to 2000 Hz)
  • Lightweight: 850 g (1.87 lb)
  • Small size and ergonomics
Inspection of Composites:
  • RF Display
  • 2 gates with B-start triggered with echo in gate A
  • TCG correction with high slope 120 dB/µs
  • Reflector depth indicated in layer
For more demanding applications:
  • Narrow band filters
  • Low noise digital amplifier
  • TCG correction with high slope 120 dB/µs
  • Backwall Echo Attenuator (BEA)
Specifications:
LCD Display
Active AreaW x H: 108 mm x 64.8 mm (4.25” x 2.55”)
Screen Diagonal5.0”
Pixel ResolutionW x H: 800 x 480 pixels
Connectors
Probe ConnectorsTwo LEMO-00
UT Output ConnectorSAP output, alarm
USB InterfaceMicro USB connector
SD Card ConnectorFull size SD card slot to accommodate standard SD cards
Pulser - All pulser measurements taken according to EN12668 specifications
Pulser ModeSimulated spike standard, uni-polar square wave optional
Pulser Voltage (SQ Mode)120 V to 300 V with 10 V steps
Pulser Width (SQ Mode)30 ns to 500 ns with 20 ns steps
Pulser Amplitude (Spike Mode)Low : 120 V
High: 300 V
Damping50 or 1000 Ohms
PRFAutomatically optimized between 15 Hz to 2000 Hz, 3 automatic adjustment modes : AutoLow, AutoMed, AutoHigh - Manual Control of PRF from 15 to 2000 Hz
Receiver
Range14016 mm at steel longitudinal wave (557”)
Digital GainDynamic range of 110 dB, with 0.2 dB step
Analog Bandwidth0.2 MHz - 20 MHz
FiltersBroad band
Narrow band filters 1; 2; 2.25; 4.5; 10; 13; 15 MHz
Gate
Independent Gates2 Gates (A and B), Gate B can support triggering by Gate A
RectificationFull Wave (FW) Positive (POS)
RF Negative (NEG)
MeasurementPeak, Flank, JFlank
Measurement unitsTOF in, mm, µs
Amplitude % dB
Memory
Capacity2 GB SD card. Up to 16 GB memory cards can be used
ReportJpeg and BMP reports
Data LoggerOption for thickness or A-scan recording, compatible with UltraMATE
Environmental
Battery6 hours battery life
On board charging
Off board charging with optional adaptor
Proportional battery gauge indicating remaining operation time
Automatic energy server mode (Auto Off) allows saving battery life by putting the instrument in sleep mode automatically when not in use
Charger“Universal” AC (100-240 V, 50-60 Hz)
Meets CCC, CE, UL, CSA and PSE requirements
Size175 mm x 111 mm x 50 mm (6.8” x 4.3” x 1.9”)
Weight845 g (1.87 lb) with the battery
LanguagesBulgarian, Chinese, Czech, Dutch, English, French, German, Hungarian, Italian, Japanese, Portuguese, Polish, Russian and Spanish
Protection as per Mil-Std-810F
Damp Heat and Humidity (Storage)10 cycles: 10 hrs at 60°C (140°F) down to 30°C (86°F), 10 hrs at 30°C (86°F) up to 60°C (140°F), transition within 2 hrs, 507.4
Temperature Shock (Storage)3 cycles: 4 hrs at –20°C (-4°F) up to 60°C (140°F), 4 hrs at 60°C (140°F), transitions within 5 minutes, 503.4 Procedure II
Vibration514.5-5 Procedure I, annex C, figure 6, general exposure: 1 hr each axis
Shock6 cycles each axis, 15 g, 11 ms half sine, 516.5 Procedure I
Loose Cargo (In Shipping Container)514.5 Procedure II
Transit Drop (Packaged for Shipment)516.5 Procedure IV, 26 drops
Operating Temperature Range0°C to 55°C (32 to 131°F)
Storage Temperature Range-20°C to 60°C (-4 to 140 °F) with battery, 24 hrs
Dustproof / WaterproofAs per IEC 529 specification for IP67 classification
ComplianceEMC/EMI
EN 55011 EN61000-6-2:2001
Ultrasound
EN 12668 ASTM E1324 E317 ANSI/NCSL Z 540-1-1994 MIl STD 45662A MIL STD 2154


INCLUDE : 

GE USM GO Ultrasonic Flaw Detector (BC# 38137-L/T*)
AC Adapter/Charger
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Carrying Case (G)
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
$2,200.00
New Olympus BondMaster 600 Multimode Bond Tester - Sale !! (BondMaster 600M)

High Performance through Intuitive Operation

The BondMaster® 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.

The resolution and brightness of the 5.7-inch VGA screen on the BondMaster 600 handheld bond tester becomes even more apparent when switched into full-screen mode. Activated by the simple touch of a key, the full-screen mode is always accessible regardless of the display mode or inspection method you are using. The BondMaster 600 bond tester is programmed for a range of standard inspection methods, including pitch-catch RF, pitch-catch impulse, pitch-catch swept, resonance, as well as a notably improved mechanical impedance analysis (MIA) method.

Portable, Lightweight, and Ergonomic

The ergonomic design of the BondMaster 600 is convenient for difficult-to-access inspection locations. For inspection in tight spaces, the factory-installed hand strap provides maximum comfort while maintaining access to the most critical functions.

Field Proven

The BondMaster 600’s case, based on a rugged, field-proven design, is world-renowned for withstanding the harshest, most demanding inspection conditions. The BondMaster 600 with its long battery life, airtight and water-resistant enclosure, high-friction bumpers, and dual-duty support stand/hook is a valuable tool for challenging inspection jobs.

Key Features

  • Designed to meet the requirements of IP66.
  • Long battery life (up to 9 hours).
  • Compatible with existing BondMaster probes (PowerLink) and probes from other manufacturers.
  • Bright, 5.7-inch color VGA display.
  • Full-screen option in any display mode.
  • Intuitive interface with application-specific presets.
  • Instant display mode toggle using the RUN key.
  • New SCAN view (profile).
  • New SPECTRUM view and Frequency Tracking feature.
  • Direct-access key gain adjustment.
  • All-Settings configuration page screen.
  • Up to two real-time readings.
  • Storage capacity of up to 500 files (program and data).
  • On-board file preview.

Two Models for Flexibility and Compatibility

The BondMaster 600 is offered in two models to accommodate the varying needs of composite bond testing. The basic model includes all pitch-catch capabilities, while the B600M model features all bond testing inspection methods. The upgrade from basic to multimode can also be performed remotely.

Both BondMaster 600 models are compatible with existing Olympus BondMaster probes, including those equipped with the PowerLink technology. Optional adaptor cables are available to enable compatibility with probes from other manufacturers.

ApplicationRecommended Method
General Honeycomb Composites Skin-to-Core DisbondsPitch-Catch (RF or IMPULSE)
Honeycomb Composites Skin-to-Core Disbonds in Tapered Structures or Non-Constant GeometriesPitch-Catch (Swept)
Smaller Skin-to-Core Disbonds in Honeycomb CompositeMIA
Identification or Repaired Areas in Honeycomb CompositeMIA
General Detection of Delamination in CompositeResonance
Inspection of Metal-to-Metal BondsResonance

FeatureB600 (basic)B600M (multimode)
Frozen-Signals Calibration
Real-Time Readings
Application Selection
PowerLink Probe Support
Pitch-Catch RF and Impulse Modes
Pitch-Catch Swept
Mechanical Impedance Analysis (MIA) Mode

Resonance Mode


(cable included)
Calibration Menu (Resonance and MIA Modes)



Specifications :

GeneralOverall Dimensions (W × H × D)236 mm × 167 mm × 70 mm (9.3 in. × 6.57 in. × 2.76 in.)
Weight1.70 kg (3.75 lb), including lithium-ion battery
Standards or DirectivesMil Standard 810G, CE, WEEE, FCC (USA), IC (Canada), RoHS (China), RCM (Australia and New Zealand), KCC (South Korea)
Power RequirementsAC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
Inputs and OutputsOne USB 2.0 peripheral port, one standard VGA analog output port, one 15-pin I/O port (male) with analog output, 3 alarm outputs.
Environmental ConditionsOperating Temperature–10 °C to 50 °C (50 °F to 122 °F)
Storage Temperature0 °C to 50 °C (32 °F to 122 °F) [with batteries] and -20 °C to 70 °C (-4 °F to 158 °F) [without batteries]
IP RatingDesigned to meet requirements of IP66
BatteryBattery TypeSingle lithium-ion rechargeable battery or AA size alkaline batteries (in an 8-cell holder).
Battery LifeBetween 8 to 9 hours
DisplaySize (W × H; Diagonally)117.4 mm × 88.7 mm; 146.3 mm (4.62 in. × 3.49 in.; 5.76 in.)
TypeFull VGA (640 × 480 pixels) color, transflective LCD (liquid crystal display).
ModesNormal or Full screen, 8 color schemes. RUN key to toggle between screen modes.
Grids and Display ToolsChoice of 5 grids, crosshairs (X-Y views only)
Connectivity and MemoryPC SoftwareBondMaster PC software, included in base BondMaster 600 kit. BondMaster PC allows viewing saved files and printing reports.
Data Storage500 files featuring user-selectable on-board preview.
LanguagesEnglish, Spanish, French, German, Italian, Japanese, Chinese, Russian, Portuguese, Polish, Dutch, Czech, Hungarian, Swedish, and Norwegian.
ApplicationsApplication Selection menu for easy and rapid configuration in all modes.
Real-Time ReadingsChoice of up to 2 real-time readings measuring signal characteristics (list depends on selected mode)
Probes Types SupportedProbe TypesPitch-Catch, Mechanical Impedance Analysis (MIA-B600M only) and Resonance probes (B600M only). The instrument is fully compatible with BondMaster PowerLink and non-PowerLink probes, as well as those of other main probe and accessory suppliers.
Bond Testing Specifications (All BondMaster Models)Probe Connectors11-pin Fischer
Gain*0 dB to 100 dB in 0.1 or 1 dB increments
Rotation*0° to 359.9° in 0.1° or 1° increments
Scan View*Variable from 0.520 s to 40 s
Low Pass Filter*6 Hz to 300 Hz
Probe DriveLOW, MEDIUM, and HIGH user-adjustable settings
Variable Persistence*0.1 s to 10 s
Variable Display Erase*0.1 s to 60 s
Available Alarm Types*3 simultaneous alarms. Choices include BOX (rectangle), POLAR (circle), SECTOR (pie), SCAN (time-based), and SPECTRUM (frequency response).
Reference Dots*Up to 25 user-defined dot recordings
Pitch-Catch Specifications (All B600 Models)Supported pitch-catch modesUser-selectable mode. Choice of RF (toneburst), Impulse (envelope) or Swept (frequency sweep)
Frequency Range1 kHz to 50 kHz (RF, Impulse) or 1 kHz to 100 kHz (Swept)
Gain0 dB to 70 dB in 0.1 or 1 dB increments
Gate10 μs to 7920 μs, adjustable in 10 μs steps. New Auto Gate mode automatically detects maximum amplitude.
Frequency Tracking*Up to 2 user-adjustable markers to monitor 2 specific frequencies from the Swept figure.
Mechanical Impedance Analysis (MIA) Specifications (B600M Only)Calibration WizardCalibration menu to determine best frequency for application, based on simple “BAD PART” and “GOOD PART” measurements
Frequency Range2 kHz to 50 kHz
Calibration WizardCalibration menu to determine best frequency based on the probe response

If you work in explosive atmospheres, the BondMaster 600 Ex bond tester conforms to the requirements of the ATEX directive. 

Standard Inclusions

The BondMaster® 600 is available in any of the following configurations:

Model: Basic and Multi-mode (M) .

Power cord: Over 11 power cord models available (for the DC charger).

Keypad and instruction label: English, international (icons), Chinese, or Japanese.

“Getting Started” print manual: over 9 languages available.

Items included in all BondMaster 600 models†: BondMaster 600 instrument with factory-installed hand strap, getting started manual, calibration certificate, rigid transport case, DC charger with power cord, Li-ion battery, AA battery tray, USB communication cable, MicroSD memory card and adaptor, Pitch-catch and MIA probe cable, and BondMaster PC software and product manuals disc.

†Standard inclusions may vary depending on your location. Contact your local distributor.

Additional items included in BondMaster 600M model only: Resonance probe cable.

Also you can check : Used Olympus BondMaster 600M ( MultiMode ) Bondtester - Sale !!

The BondMaster 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.
$2,585.00
Used Olympus BondMaster 600M MultiMode Bondtester - Sale !! (BondMaster 600M)
High Performance through Intuitive Operation
 
The BondMaster 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.
 
The resolution and brightness of the 5.7-inch VGA screen on the BondMaster 600 handheld bond tester becomes even more apparent when switched into full-screen mode. Activated by the simple touch of a key, the full-screen mode is always accessible regardless of the display mode or inspection method you are using. The BondMaster 600 bond tester is programmed for a range of standard inspection methods, including pitch-catch RF, pitch-catch impulse, pitch-catch swept, resonance, as well as a notably improved mechanical impedance analysis (MIA) method.
 
Portable, Lightweight, and Ergonomic

The ergonomic design of the BondMaster 600 is convenient for difficult-to-access inspection locations. For inspection in tight spaces, the factory-installed hand strap provides maximum comfort while maintaining access to the most critical functions.
 
Field Proven

The BondMaster 600’s case, based on a rugged, field-proven design, is world-renowned for withstanding the harshest, most demanding inspection conditions. The BondMaster 600 with its long battery life, airtight and water-resistant enclosure, high-friction bumpers, and dual-duty support stand/hook is a valuable tool for challenging inspection jobs.
 
Key Features
 
  -  Designed to meet the requirements of IP66.
  -  Long battery life (up to 9 hours).
  -  Compatible with existing BondMaster probes (PowerLink) and probes from other manufacturers.
  -  Bright, 5.7-inch color VGA display.
  -  Full-screen option in any display mode.
  -  Intuitive interface with application-specific presets.
  -  Instant display mode toggle using the RUN key.
  -  New SCAN view (profile).
  -  New SPECTRUM view and Frequency Tracking feature.
  -  Direct-access key gain adjustment.
  -  All-Settings configuration page screen.
  -  Up to two real-time readings.
  -  Storage capacity of up to 500 files (program and data).
  -  On-board file preview.
 
Two Models for Flexibility and Compatibility
The BondMaster 600 is offered in two models to accommodate the varying needs of composite bond testing. The basic model includes all pitch-catch capabilities, while the B600M model features all bond testing inspection methods. The upgrade from basic to multimode can also be performed remotely.
 
Both BondMaster 600 models are compatible with existing Olympus BondMaster probes, including those equipped with the PowerLink technology. Optional adaptor cables are available to enable compatibility with probes from other manufacturers.

Included :

-Bondmaster 600M Unit
-Hard Transport Case
-Lithium Ion Battery
-Charger and AC Cable

Also you can check product : New Olympus BondMaster 600 Multimode Bond Tester - Sale !!

Good working condition Olympus Bondmaster 600M for sale. This unit is in good shape with very few signs of use. The buttons work nicely and the screen is relatively scratch-free. The unit overall functions perfectly. Please check out the high resolution images for a closer look!
$2,180.00
Per Page      1 - 20 of 59

Brands List

  • API
  • Artec3D
  • BRUKER
  • CREAFORM
  • Easy-Laser
  • FARO
  • Fixturlaser
  • GE Inspection Technologies
  • GEOSLAM
  • GSSI
  • Hamar Laser
  • Hitachi
  • Leica Geosystem
  • MALA
  • NDT System
  • Olympus
  • PINPOINT LASER SYSTEM
  • Proceq
  • PRUFTECHNIK
  • Radiodetection
  • SciAps
  • Sensors and Software
  • SKF
  • Sonatest
  • Thermo Fisher Scientific
  • Trimble
  • US Radar Inc
  • Waygate Krautkrämer
  • ZETEC