Fixturlaser

Sort By:  
The Easy-Laser® E540 is a reliable and economical high performance alignment system for rotating machinery. The E540 allows you to easily perform all alignment prerequisites and checks, letting you measure and align in only three simple steps.
$1,400.00
The Easy-Laser E540 is a reliable and economical high performance alignment system for rotating machinery. The E540 allows you to easily perform all alignment prerequisites and checks, letting you measure and align in only three simple steps.
$2,100.00
Fixturlaser XA express alignment by fixturlaser Elos Fixturlaser AB is one of the world s leading manufacturers of laser based alignment systems. We develop, manufacture and market laser based measurement instruments for alignment and positioning of rotating machinery. Our systems are user friendly tools that minimize the number of operations involved in the alignment process, thus speeding up the process - Express Alignment by Fixturlaser.
$1,300.00
The Fixturlaser XA Pro redefines the Standard for Laser Based Shaft Alignment. At its launch a few years ago, the Fixturlaser XA definitely set a new standard with its innovative design, allowing quick and accurate laser based shaft alignment. With the introduction of new technology in both hardware and software, this alignment tool took a huge innovative technology leap forward with regards to its user friendliness and the once so time consuming task of performing shaft alignment.
$1,650.00
The new version of Fixturlaser GO Pro comes with a hardware and software package that will save the maintenance professional’s time and hard work.
$2,980.00
The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
$3,150.00
The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.
$3,880.00
The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.
$7,200.00
A revolution in shaft alignment as well as a revolution in usability with the NXA Pro – a digital laser based shaft alignment system! The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
$5,280.00
With the NXA Ultimate you have covered any kind of angle that needs to be covered of your machinery. It includes shaft alignment applications as well as geometric applications, hence, as the name says, it is an ultimate measurement tool.
$5,280.00
In spite of challenging conditions, the instrument performs precise measurements with two wireless measurement units, large detectors, and powerful lasers.
$2,525.00
The all-digital wireless ECO is an entry-level system dedicated to horizontal shaft alignment. With wireless sensor units, a 4” color display, rechargeable batteries, and an IP65 design that withstands harsh environments, you have a laser alignment system at an affordable price!
$3,050.00
Used Easy-Laser E540 Laser Shaft Alignment System - Sale !! (E540)

The shaft alignment system has a large 5.7", bright colour display that clearly shows all the steps of the measurement. The measuring units have TruePSD-technology, which gives unlimited resolution. Twin laser beams, twin PSDs and twin inclinometers give you superb control of the measurement in all situations. The measuring units are incredibly compact featuring Bluetooth® Wireless technology, an integrated rechargeable battery and large 30 mm TruePSD detectors. This means that they are easy to install on most types of machines, even where there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned. Display unit, measuring units and fixtures are all very robust for the highest accuracy in demanding industrial environments.

It is possible to connect two very useful accessories to the system. With Vibrometer E285 it is possible to check the vibration level and bearing condition of the machine. Using E170 BTA you can check and align sheaves and pulleys with digital precision. You can document the measurements for vibration checks and belt alignment in the same way as for the normal shaft alignment programs. There is also a wide range of accessory brackets, such as magnet bases, axial magnet brackets and brackets for non-rotating shafts. The transportation case is equipped with recessed compartments for the accessories, which means that you can carry everything in one case. With the barcode reader the user can save many key operations where all machine dimensions, tolerances and compensation values are entered in one single operation, and the measurement can be started directly. At the first measurement, save the downloaded machine data and attach the barcode label to the machine. The barcode reader is an accessory.

Includes:
12-0700 - Display unit E-series E52
12-0777 - Measuring unit S
12-0776 - Measuring unit M
12-0016 - Shaft bracket with chain
12-0319 - Chain 900 mm
12-0059 - Set of rods (4x 60 mm)
01-0873 - Rod 120 mm
12-0495 - Strap for Display unit
05-0567 - Quick manual
03-0824 - Measuring tape 3m
03-0914 - USB Memory stick with EasyLink™ program
03-0822 - Cable USB A to B 1,8m
03-0821 - Battery Charger (100-240 V AC)
12-0750 - DC Split cable ,for charging
12-0751 - DC to USB adapter, for charging
05-0314 - CD with documentation
03-1007 - Case Plastic Shaft E530



The Easy-Laser® E540 is a reliable and economical high performance alignment system for rotating machinery. The E540 allows you to easily perform all alignment prerequisites and checks, letting you measure and align in only three simple steps.
$1,400.00
New Easy-Laser E540 Laser Shaft Alignment System - Sale !! (E540)

The Easy-Laser E540 Shaft Alignment System is a precise and competent alignment system designed for your rotating machinery. You can track the status of your machinery with vibration level check, find prerequisites for alignment, measure and align in three easy steps, and document your results all with an easy to learn and use system. The E540 system gives you measurement programs for horizontal machines, vertical machines, and machine train alignment capabilities. With the large 5.7” colour display, you’ll have all the information you need during every step of alignment. Bluetooth communication technology, integrated rechargeable batteries, and TruePSD detectors — the E540 is your solution for machinery alignment.

Key Features:

  • Easy to learn and use
  • Compact measuring units for use on most machines
  • All wireless units with built-in Bluetooth technology and integrated rechargeable battery
  • Large 5.7” colour display
  • Programs with both symbols and text makes measurement easy to understand
  • TruePSD technology with unlimited resolution
  • Dual PSD, dual laser beams, and dual inclinometers for superior control and accuracy
  • Create PDF reports directly from the Display unit and save to USB memory
  • Expandable and adaptable: a wide range of accessories means that you can adapt the system to your needs, now and in the future

SPECS : 

Measurement Accuracy±1% 1 digit
Measurement rangeUp to 10 m (33 feet)
Laser wavelength635–670 nm
Laser classSafety class II
Laser output<1 mW
Electronic inclinometer0.1° resolution
Thermal sensors-20–60 °C
Environmental protectionIP class 65
Temperature range-10–50 °C
Dimensions (Measuring units)69.0x61.5x41.5 mm (2.72”x2.42”x1.63”)
Weight (Measuring units)172 g (6.0 oz)
Type of display/sizeVGA 5.7” colour screen, backlit LED
Displayed resolution0.001 mm / 0.05 thou
Internal battery (fixed)Heavy duty Li Ion chargeable
Dimensions (Display Unit)250x175x63 mm (9.8”x6.9”x2.5”)
Weight (Display Unit)1020 g (2.3 lbs)
The Easy-Laser E540 is a reliable and economical high performance alignment system for rotating machinery. The E540 allows you to easily perform all alignment prerequisites and checks, letting you measure and align in only three simple steps.
$2,100.00
Used Fixturlaser XA Express Alignment - Sale !! (XA )

The alignment and geometric applications programs that are included in the Fixturlaser XA Ultimate, complement each other. Properly aligned machine starts at the time of its installation, e.g. with checking that the machine foundation is flat before the machine is installed upon it. If the machine foundation is skewed or warped in any way, that will influence the machine's capability to function.

The new Fixturlaser XA features:

  • No time-consuming setting of lasers and coarse alignment
  • X-large (30 mm) detectors coupled with line lasers
  • Automatic registration of measurement points
  • Next step guidance with 3D Flash animations
  • X-large high-resolution colour touch screen
  • Real-time live machine adjustments
  • Oversized key data and animated arrows
  • All results calculated instantly Pre-mounted fixtures
  • Export reports via USB jump drive

Available with Bluetooth wireless detectors.

Fixturlaser Express Alignment XA.

1 pc display unit
Art No: 1-0753
Series No: 76368

1 transmitter / sensor units
Art No: 1-0754
Serial No.: 67023

1 transmitter / sensor units
Art No: 1-0755
Serial No.: 57013

2 extra chains

1 set of bars

Power cords, instruction manual, CD manual included.



Fixturlaser XA express alignment by fixturlaser Elos Fixturlaser AB is one of the world s leading manufacturers of laser based alignment systems. We develop, manufacture and market laser based measurement instruments for alignment and positioning of rotating machinery. Our systems are user friendly tools that minimize the number of operations involved in the alignment process, thus speeding up the process - Express Alignment by Fixturlaser.
$1,300.00
Used Fixturlaser XA Pro Laser Alignment - Sale !! (XA Pro)

Fixturlaser XA Pro Features

  • Intuitive Interface: guides users throughout the measurement step by step
  • Large Touch Screen: durable back-lit 6,4" large color touch screen
  • Color Coded Results: green within tolerance, orange near tolerance, and red out of tolerance
  • 3D Animations: arrows guide you by showing the direction of machine adjustment
  • ICON based interface: [NO TEXT = NO LANGUAGE BARRIERS]
  • Compound Moves: horizontal and vertical alignment accomplished without remeasuring
  • Express Mode: measurement values are registered automatically, sampling up to 2079 points in three position
  • Documentation: name your alignment and save it in the memory manager. Unlimited number of savings.
  • 30 mm detector: no need for rough alignment. Biggest measurement area
  • Wireless: Bluetooth* communication
  • Resume Function: an exceptional power management that will resume to where you left off
  • CCD Technology: UNAFFECTED BY SUNLIGHT, high linearity, digital signal processing gives high degree of fault correction
  • Pre-mounted Fixtures: speed up mounting and packing of the fixtures
  • Expandable: add more software and hardware packages, as your measurement needs change
  • Machine Defined Data: machine configuration templates
Measuring units:
Housing material: Anodized aluminum and high impact ABS plastic over molded with TPE rubber
Operating temperature: -10 to 60°C (14 to 140°F)
Relative humidity: 10 – 90%
Environmental protection: IP 65
Laser: 650 nm class II diode laser
Laser line fan angle: 6°
Laser power: < 1 mW
Measurement distance: 10 m (33 feet)
Detector: CCD
Detector length: 30 mm (1"-2" )
Detector resolution: 1 μm (0,04 mils)
Measurement accuracy: 0,3% ± 7 μm (0,3% ± 0,27 mils)
Inclinometer resolution: 0°-1°
Inclinometer accuracy: ±0°-5°
LED Indicators: Laser transmission / Status indicators

V-brackets:
Fixture: V-fixture for chain, width 20 mm
Material: Anodized aluminum
Shaft diameter: Ø 20-450 mm (3/4"-18")
(4) Rods, 6" -10" (150 mm-250 mm)

(2) Cables:
Length: 3 m (10 feet)

Wireless package:
Housing material: PC/ABS plastic
Operating temperature: -10 to 60°C (14 to 140°F)
Wireless communication: Class II bluetooth transmitter
Power supply: 3 AA (LR6) batteries
Operating time: 10 hours continuously
LED Indicators: Transmitter / Battery status indicators
The Fixturlaser XA Pro redefines the Standard for Laser Based Shaft Alignment. At its launch a few years ago, the Fixturlaser XA definitely set a new standard with its innovative design, allowing quick and accurate laser based shaft alignment. With the introduction of new technology in both hardware and software, this alignment tool took a huge innovative technology leap forward with regards to its user friendliness and the once so time consuming task of performing shaft alignment.
$1,650.00
Used FixturLaser GO Pro Basic Laser Shaft Alignment - Sale !! (GO Basic)

Fixturlaser Go Basic Features

  • Intuitive interface: Guides users throughout the measurement, step by step.
  • Large Screen: Durable transreflective 4" large monochrome LDC screen.
  • ICON Based Interface= NO Text: No Language barriers.
  • Express ModeTm: Measurement values are registered automatically, sampling up to 2079 points in three position.
  • Documentation: Name your current alignment job and save it in the memory manager. It has the ability to store 350 measurements.
  • 30 mm detector: No need for rough alignment. Biggest measurement area.
  • Resume function: An exceptional power management system that will resume from where you left off.
  • CCD Technology: High linearity, digital signal processing provides a very high degree of fault correction.
  • Pre-mounted fixtures: Speeds up mounting and packing of the fixtures.

FIXTURLASER GO BASIC - COMPLETE SYSTEM
Weight (incl. all standard parts): 5,0 kg (11,0 lbs)
DISPLAY UNIT
Weight: 0.66 kg (1.46 lbs) with batteries
Dimensions: 205 mm x 116 mm x 56 mm (8.1 in x 4.6 in x 2.2 in)
Environmental protection: IP 54
Flash storage memory: 500 MB
Display: Color TFT-LCD backlit
Display size: 4” diagonal (84 x 56 mm)
Power supply: 3 x 1.5V LR-14 (C) Alkaline batteries or
 1.2V NiMH HR-14 Rechargeable Nicke
 Metal Hydride cells
Operating time: 30 hours typical use
SENSOR UNITS
Weight: 170 g (6,0 oz)
Dimensions: 79 mm x 77 mm x 34 mm
 (3,4 in x 3,0 in x1,3 in)
Environmental Protection: IP 65
Measurement Distance: Up to 5 m (16,4 feet)
Detector: CCD
Detector Length: 30 mm (1,2 in )
Detector Resolution: 1 µm (0,04 mils)
Measurement Accuracy: 0,3% ± 7 µm (0,3% ± 0,28 mils)
SHAFT BRACKETS
Shaft diameter: Ø 25 – 175 mm (1in – 6.9in)
 With extension chain
 Ø 25 – 450 mm (1in – 18in)
Rods: 4 pcs 150 mm (5,9 in)
The new version of Fixturlaser GO Pro comes with a hardware and software package that will save the maintenance professional’s time and hard work.
$2,980.00
Used FIXTURLASER NXA Pro Laser Shaft Alignment System - Sale !! (NXA Pro)

NXA Pro – Package with Case

  • Display unit
  • 2 pcs of digital smart sensors
  • 2 pcs of complete V-brackets
  • 2 pcs of magnetic V-brackets
  • 2 pcs of chains 8 mm 60 links
  • Rod kit
  • Extension fixture, 49 mm
  • Magnetic base
  • Tape measure 5 m
  • 2 pcs of angled universal tools
  • USB stick
  • Charger for display unit and sensors
  • NXA manual – English version


Techincal specification

NXA Pro*
Weight including all standard parts7,7 kg (17 lbs)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialHigh Impact ABS Plastic
Weight (empty)2,5 kg (5,5 lbs)
Environmental protectionDust-, Water- (5m), Air-tight with air pressure compensation valve
Drop test (empty)3m onto concrete floor
Storage Temp(empty)-40 to 80 °C
Dimension415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)
Display Unit
Housing MaterialBrushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp, system off0 to 38°C   ( 32 to 100°F)
Battery Charging Temp, system on0 to 32°C   ( 32 to 90°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Relative humidity10 – 90%
Weight1,2 kg (2,6 lbs) with battery
Dimensions124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Processor1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory256 Mb
Flash storage memory8 Gb
>100 000 measurements
DisplayColour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size6,5” (165mm) diagonal (133 x 100 mm)
Display resolutionFull VGA 640×480 pixels
Color depth262 000 colors
Interface6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible1 USB 2.0 Master port (IP 67)
1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible1 Ethernet 10/100BaseT RJ45
1 HDMI port (DVI compatible)
1 Service port
Wireless communicationClass I Bluetooth transmitter with multi-drop capability
Power supplyHigh performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time10 hours continuous use (with 50% LCD backlight)
Battery Charging time (system off, room temperature)5 h
Xpress Battery Charging time (system off, room temperature)1 h charge – 5 hours operating time
LED indicatorsUnit state and 2×5 battery state indicators with instant battery check


Digital Laser Sensors
Housing Material:Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp:-10 to 50°C   (14 to 122°F)
Storage Temp:-20 to 70°C ( -4 to 158°F)
Long term storage temp:Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp:0 to 40°C   ( 32 to 104°F)
Relative humidity:10 – 90%
Weight:192 g (6,8 oz) with battery
Dimensions:92 mm x 77 mm x 33 mm
(3,6 in x 3,0 in x 1,3 in)
Environmental protection:IP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 10m
Detector2nd gen. digital sensor
Detector length30mm ( 1,2 in )
Detector angular subtense30mrad/m (3mm/100mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processing:Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
Inclinometer:Dual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy±1°
Total measurement axis’s (M3 S3 unit)14
Wireless communication:Class I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);
Charging: 5V, 0,5A
Communication: with separate USB/RS 485 adapter cable
Power supplyHigh-performance Li-Ion battery or external power.
Operating time:17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)8 h
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*
Shaft brackets
Fixture:V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material:Anodized aluminum
Shaft diameter:Ø 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods:4 pcs 100 mm (3,9 in) and
4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)



The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
$3,150.00
Used Fixturlaser EXO Laser Shaft Alignment - Sale !! (EXO)

FIXTURLASER EXO – Package with Case

  • Tablet EX
  • 2 pcs of digital smart sensors EX
  • 2 pcs of V-brackets, complete with chains EX
  • Rod kit
  • 2 pcs of chains, 8 mm (length=970 mm)
  • Power cable, EU and US
  • USB cable with snap ferrite, A-mini, 2 m
  • Power supply 5 USB ports
  • 3 pcs of USB cables A-mini B, 0,5 m
  • Tape measure 5 m
  • 2 pcs of angled universal tools
  • Fixturlaser NXA manual – English version


Technical specification

Fixturlaser EXO – Package with Case*
Weight including all standard parts6,6 kg (14,6 lbs)
Storage temp-20 to 70°C (-4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialAnodixed aluminum/plywood
Weight (empty)4,0 kg (8,8 lbs)
Dimension370 mm x 270 mm x 205 mm (14,6 in x 10,6 in x 8,1 in)
Digital Laser Sensors
Housing MaterialAnodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp0 to 50°C   (32 to 122°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp5 to 40°C   (41 to 104°F)
Relative humidity10 – 90%
WeightM4 Ex: 220 g (7,8 oz)
S4 Ex: 190 g (6,7 oz)
Dimensions92 mm x 77 mm x 33 mm
(3,6 in x 3,0 in x 1,3 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 5m
Detector2nd gen. digital sensor
Detector length30mm ( 1,2 in )
Detector angular subtense30mrad/m (3mm/100mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processing:Digital signal processing with sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
Inclinometer:Dual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Total measurement axis’s (M4 S4Ex units)14
Wireless communication:Class I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);

Charging: 5V, 0,5A

Power supplyHigh-performance Li-Ion battery or external power.
Operating time:12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)5 hours
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*  


Shaft brackets
FixtureV-fixture with non-twisting chain, width 20 mm (0,79 in)
MaterialAnodized aluminum
Shaft diameterØ 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods4 pcs 100 mm (3,9 in) and
4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)



The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.
$3,880.00
New Fixturlaser EXO Laser Shaft Alignment - Sale !! (EXO)

Fixturlaser EXO

A Smart Alignment System Certified for Work in Hazardous Areas

Our core values, GuideU and Alignment Intelligence, have led to the development of several first industry functions, where True Live and VertiZontal Moves™ are unique on the market for laser-based shaft alignment tools. They bring ease of use to our end users, which above all facilitates easy precision shaft alignment, on-the-job time saving, improved reliability, and more importantly, money savings.

With the FIXTURLASER EXO, you get all this in an intrinsically safe shaft alignment package.

Easy-to-Use Shaft Alignment in Hazardous Areas

TRUE LIVE

You Always Know Your Machine’s Position with the FIXTURLASER EXO

The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.

Industry-leading EX certified smart sensors

  • Integrated Bluetooth for wireless communication between the display unit and smart sensors
  • 30 mm digital sensor detector line laser eliminates rough alignment, which results in a short setup time
  • Built-in dual inclinometers to detect backlash and obtain angular values during measurement in horizontal alignment
  • Thinnest smart sensors on the market
  • Premounted fixtures give a short setup time
  • Instant battery check – in both on and off mode
  • II 3G Ex ic op isIIC T4 Gc


EX certified tablet with an app and icon-based user interface

  • Icon-based and color-coded user interface a language-free user interface
  • True live values during adjustment
  • Animated arrows indicating adjustment orientation and misalignment magnitude
  • Integrated Bluetooth for wireless communication between the display unit and smart sensors
  • ATEX/IECEx Zone 2 certified including ruggedized IP68 tablet device


uideU

Our Graphical User Interface, Your Alignment Guide

Our patented icon- and app-based, and color-coded user interface, GuideU, makes it easy to measure, align, and document each job. In order to minimize the risk of operator errors, we developed an adaptive user interface for the FIXTURLASER EXO system. It guides the user throughout the job in logical and easy-to-follow steps. It will deliver measurement and correction values based on what the system finds during the alignment process.

This eliminates confusion for less-experienced users and provides ease of access throughout a measurement with the FIXTURLASER EXO system. To add to the enhanced user experience, we have given the interface a game-like 3D graphic look facilitating the unmistakable interpretation of any misalignment error.

Our icon-driven, language-free alignment systems produce measurement reports easily understood by all users, regardless of their language.

Vertizontal Moves

Measure Once, Move in Two Directions

The VertiZontal Moves™ feature displays exactly how much a misaligned machine needs to be adjusted and in which direction, by adding or removing shims to the machine’s feet. No more re-measuring between the vertical and the horizontal phases to correct the horizontal misalignment.

This industry-first function saves time and ensures accuracy the first time around. Time savings mean cost savings for the maintenance department, the production department. In short, savings for the entire company.

FIXTURLASER EXO – Package with Case

  • Tablet EX
  • 2 pcs of digital smart sensors EX
  • 2 pcs of V-brackets, complete with chains EX
  • Rod kit
  • 2 pcs of chains, 8 mm (length=970 mm)
  • Power cable, EU and US
  • USB cable with snap ferrite, A-mini, 2 m
  • Power supply 5 USB ports
  • 3 pcs of USB cables A-mini B, 0,5 m
  • Tape measure 5 m
  • 2 pcs of angled universal tools
  • Fixturlaser NXA manual – English version

Technical specification

Fixturlaser EXO – Package with Case*
Weight including all standard parts6,6 kg (14,6 lbs)
Storage temp-20 to 70°C (-4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialAnodixed aluminum/plywood
Weight (empty)4,0 kg (8,8 lbs)
Dimension370 mm x 270 mm x 205 mm (14,6 in x 10,6 in x 8,1 in)
Digital Laser Sensors
Housing MaterialAnodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp0 to 50°C   (32 to 122°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp5 to 40°C   (41 to 104°F)
Relative humidity10 – 90%
WeightM4 Ex: 220 g (7,8 oz)
S4 Ex: 190 g (6,7 oz)
Dimensions92 mm x 77 mm x 33 mm
(3,6 in x 3,0 in x 1,3 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 5m
Detector2nd gen. digital sensor
Detector length30mm ( 1,2 in )
Detector angular subtense30mrad/m (3mm/100mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processing:Digital signal processing with sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
Inclinometer:Dual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Total measurement axis’s (M4 S4Ex units)14
Wireless communication:Class I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);

Charging: 5V, 0,5A

Power supplyHigh-performance Li-Ion battery or external power.
Operating time:12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)5 hours
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*  


Shaft brackets
FixtureV-fixture with non-twisting chain, width 20 mm (0,79 in)
MaterialAnodized aluminum
Shaft diameterØ 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods4 pcs 100 mm (3,9 in) and
4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)


The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.
$7,200.00
New FIXTURLASER NXA Pro Laser Shaft Alignment System - Sale !! (NXA Pro)

It is a shaft alignment revolution

A revolution in shaft alignment as well as a revolution in usability with the  NXA Pro – a digital laser based shaft alignment system!

The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.

Alignment Intelligence

The NXA Pro system represents over 30 years of laser-based shaft alignment innovation. Through Alignment Intelligence, maintenance professionals can do their jobs more efficiently and achieve better results.

Adaptive User Interface for Smart Sensors

You will be guided through the measurement and alignment process of your machines using the adaptive user interface of the  NXA Pro.

OmniView

The graphical user interface is shown off on a 6,5” transreflective display screen with icons and symbols to guide you, in other words, no text is involved.

The adaptive user interface will guide you throughout the measurement and alignment process.

We have fitted the NXA Pro with gyros and can, therefore, adapt the screen view from the same side that the user is positioned – our OmniView™ function, i.e. the system knows where it is in relation to the machine.

VertiZontal Moves

The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time-strained maintenance world!

Power management system

The NXA Pro has a power management system that will make your life so much easier! The display unit has a 10 hour continuous battery operating time, and should the need arise during an alignment job; the display unit can be express charged to an 80% capacity in one hour. The sensor units will last for 24 hours minimum thanks to the long-life batteries.

Time-saving technology

The NXA Pro’s sensor units have graduated to the 2nd generation sensor. This sensor version improves the tolerance for detrimental external factors, such as vibrations and ambient light, and delivers the most accurate and precise measurement values compared to any other system. Measurement values are automatically registered throughout the entire measurement process. We have integrated line laser with the sensor and this combination virtually eliminates rough alignment, a huge time saver.

Very compact, only 33,5 mm in width, the sensor units will fit in the tightest spots. The sensor units contain long-life batteries, Bluetooth communication, and gyroscopes. The gyroscopes make it possible to measure according to the Tripoint Method in the vertical shaft alignment application, something that no other shaft alignment instrument is capable of!

NXA Pro – Package with Case

  • Display unit
  • 2 pcs of digital smart sensors
  • 2 pcs of complete V-brackets
  • 2 pcs of magnetic V-brackets
  • 2 pcs of chains 8 mm 60 links
  • Rod kit
  • Extension fixture, 49 mm
  • Magnetic base
  • Tape measure 5 m
  • 2 pcs of angled universal tools
  • USB stick
  • Charger for display unit and sensors
  • NXA manual – English version

Techincal specification

NXA Pro*
Weight including all standard parts7,7 kg (17 lbs)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialHigh Impact ABS Plastic
Weight (empty)2,5 kg (5,5 lbs)
Environmental protectionDust-, Water- (5m), Air-tight with air pressure compensation valve
Drop test (empty)3m onto concrete floor
Storage Temp(empty)-40 to 80 °C
Dimension415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)
Display Unit
Housing MaterialBrushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp, system off0 to 38°C   ( 32 to 100°F)
Battery Charging Temp, system on0 to 32°C   ( 32 to 90°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Relative humidity10 – 90%
Weight1,2 kg (2,6 lbs) with battery
Dimensions124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Processor1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory256 Mb
Flash storage memory8 Gb
>100 000 measurements
DisplayColour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size6,5” (165mm) diagonal (133 x 100 mm)
Display resolutionFull VGA 640×480 pixels
Color depth262 000 colors
Interface6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible1 USB 2.0 Master port (IP 67)
1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible1 Ethernet 10/100BaseT RJ45
1 HDMI port (DVI compatible)
1 Service port
Wireless communicationClass I Bluetooth transmitter with multi-drop capability
Power supplyHigh performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time10 hours continuous use (with 50% LCD backlight)
Battery Charging time (system off, room temperature)5 h
Xpress Battery Charging time (system off, room temperature)1 h charge – 5 hours operating time
LED indicatorsUnit state and 2×5 battery state indicators with instant battery check


Digital Laser Sensors
Housing Material:Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp:-10 to 50°C   (14 to 122°F)
Storage Temp:-20 to 70°C ( -4 to 158°F)
Long term storage temp:Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp:0 to 40°C   ( 32 to 104°F)
Relative humidity:10 – 90%
Weight:192 g (6,8 oz) with battery
Dimensions:92 mm x 77 mm x 33 mm
(3,6 in x 3,0 in x 1,3 in)
Environmental protection:IP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 10m
Detector2nd gen. digital sensor
Detector length30mm ( 1,2 in )
Detector angular subtense30mrad/m (3mm/100mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processing:Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
Inclinometer:Dual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy±1°
Total measurement axis’s (M3 S3 unit)14
Wireless communication:Class I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);
Charging: 5V, 0,5A
Communication: with separate USB/RS 485 adapter cable
Power supplyHigh-performance Li-Ion battery or external power.
Operating time:17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)8 h
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*
Shaft brackets
Fixture:V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material:Anodized aluminum
Shaft diameter:Ø 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods:4 pcs 100 mm (3,9 in) and
4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)



A revolution in shaft alignment as well as a revolution in usability with the NXA Pro – a digital laser based shaft alignment system! The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
$5,280.00
New FIXTURLASER NXA Ultimate Laser Shaft Alignment System - Sale !! (NXA Ultimate)

Ultimate Measurement Tool for Optimal Operation Conditions

With a mix of shaft alignment and geometry applications, you are safeguarding your machinery’s operation condition. Regular maintenance checks or installations of new machinery, you have what you need in the NXA Ultimate.

Machine foundations need to be checked for any flatness faults, before the machine is actually installed, hence the flatness application. And once installed, the machine’s alignment status must be measured. With everything verified to be perfectly aligned, you can also ensure the machinery’s optimal operation conditions.

Shaft alignment

The NXA Ultimate comes with technology enabling functions and capabilities, which in many cases are industry firsts, for example:

  • CCD detectors with ultra high definition resolution.
  • New sensor units with Bluetooth incorporated are the industry’s most compact, yet, they feature a 30 mm detector surface and line lasers.
  • The OmniView™ feature keeps track of the position of both the user and the machine to show the screen display from the user’s perspective, thanks to the built-in gyroscope (6-axis MEMS Inertial Motion Sensor) in the display unit.
  • Ability to keep track of the position of the sensors in both the vertical and horizontal orientation, and any inclination in-between, when performing a shaft alignment, thanks to the built-in gyroscope in the sensor units. Hence, you are then able to perform a shaft alignment on vertically mounted machines where it is not possible to do a 180° shaft rotation.
  • Excellent power management – 10 hours on one charge.


Geometric Measurements

Acoem’s laser-based geometry system is characterized by its user-friendliness and versatility, such as:

  • The graphic user interface is intuitive and 3D animated, with icons and color-coded symbols to guide you throughout the measurement and alignment process.
  • Live values during measurement and simultaneous live adjustment, in both vertical and horizontal orientation (X and Y values), during the adjustment process.
  • Measurement results in micron resolution.
  • Post-measurement evaluation means that you can process saved measurement results in order to choose the best reference. This will result in as few corrections as possible.

The NXA Ultimate Package with Case

  • Display unit
  • 2 pcs of digital smart sensors
  • 2 pcs of complete V-brackets with chains
  • 2 pcs of magnetic V-brackets
  • 2 pcs of chains 8 mm 60 links
  • Rod kit
  • Extension fixture, 49 mm
  • Magnetic base
  • R2 sensor/receiver
  • Turnable sensor holder on magnetic base
  • T21 transmitter with mounting magnet
  • 2 pcs of angled tools
  • Tape measure 5 m
  • USB stick
  • Chargers for display unit and sensors
  • NXA Shaft alignment manual – English version
  • NXA Geometry manual – English version


Technical specification

Dimensions
NXA Ultimate
Weight including all standard parts7,7 kg (17 lbs)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialHigh Impact ABS Plastic
Weight (empty)2,5 kg (5,5 lbs)
Environmental protectionDust-, Water- (5m), Air-tight with air pressure compensation valve
Drop-test (empty)3m onto concrete floor
Storage Temp(empty)-40 to 80 °C
Dimension415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)
Display Unit
Housing materialBrushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp-10 to 50°C   ( 14 to 122°F)
Battery charging temp, system off0 to 38°C   ( 32 to 100°F)
Battery charging temp, system on0 to 32°C   ( 32 to 90°F)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Relative humidity10 – 90%
Weight1,2 kg (2,6 lbs) with battery
Dimensions124 mm x 158 mm x 49 mm (4,9 in x 6,2 in x 1,9 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Processor1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory256 Mb
Flash storage memory8 Gb, >100 000 measurements
DisplayColour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size6,5” (165mm) diagonal (133 x 100 mm)
Display resolutionFull VGA 640 x 480 pixels
Color depth262 000 colors
Interface6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible1 USB 2.0 Master port (IP 67)
1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible1 Ethernet 10/100BaseT RJ45
1 HDMI port (DVI compatible)
1 Service port
Wireless communicationClass I Bluetooth transmitter with multi-drop capability
Power supplyHigh performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time10 hours continuous use (with 50% LCD backlight)
Battery charging time (system off, room temperature)5 h
Xpress battery charging time (system off, room temperature)1 h charge – 5 hours operating time
LED indicatorsUnit state and 2 x 5 battery state indicators with instant battery check
Digital Laser Sensors
Housing materialAnodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp-10 to 50°C   (14 to 122°F)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Battery charging temp0 to 40°C   ( 32 to 104°F)
Relative humidity10 – 90%
Weight192 g (6,8 oz) with battery
Dimensions92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x x 1,3 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 10 m
Detector2nd generation digital sensor
Detector length30 mm ( 1,2 in )
Detector angular subtense30 mrad/m (3 mm/100 mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processingDigital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
Inclinometer:Dual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy±1°
Total measurement axis’s (M3 S3 unit)14
Wireless communicationClass I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);
Charging: 5V, 0,5A
Communication: with separate USB/RS 485 adapter cable
Power supplyHigh-performance Li-Ion battery or external power.
Operating time17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)8 h
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*


Shaft brackets
FixtureV-fixture with non-twisting chain, width 20 mm (0,79 in)
MaterialAnodized aluminum
Shaft diameterØ 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)
R2 Sensor (receiver)

Housing material

Anodized aluminum and ABS plastic

Operating temperature

0 to 50°C (32 to 122°F)

Storage temperature

-20 to 70°C (-4 to 158°F)

Relative humidity

10 – 90%

Weight

172 g (6.07 oz)

Dimensions

94 mm x 50 mm x 44 mm (3.7 in x 2.0 in x x 1.7 in)

Environmental protection

IP 65

Detector

2-axis PSD

Detector size

20 mm x 20 mm (0.8 in x 0,8 in)

Detector resolution

1 µm

Measurement accuracy

1% ± 3 µm

Ambient light protection

Optical filtering and ambient light signal rejection

Inclinometer resolution

0.01°

Inclinometer accuracy

±0.1°

Wireless communication

Class I Bluetooth transceiver with multi-drop capability.
BLE Bluetooth Low Energy (BT 4.0) and Classic Bluetooth.

Communication range

10 m (33 ft)

Connectors

1 USB Micro port (IP67)
Charging: 5V, 0,5A

Power supply

High-performance Li-Ion battery.

Operating time

12 hours continuous use

Battery Charging time (system off, room temperature)

8 hours

Battery Capacity

10.4 Wh

LED indicators

Unit state, battery status, and Bluetooth status.

T21 Transmitter

Housing material

Anodized aluminum

Operating temperature

0 to 50°C (32 to 122°F)

Storage temperature

-20 to 70°C (-4 to 158°F)

Relative humidity

10 – 90%

Weight

1150 g (2.54 oz)

Dimensions

100 mm x 103 mm x 109 mm
(3.9 in x 4.0 in x 4.2 in)

Laser

650 nm class II diode laser

Laser power

< 1 mW

Measurement distance

Up to 20 m (66 ft)

Laser sweep flatness

±0.02 mm/m

Angular prism accuracy

±0.02 mm/m

Spirit level resolution

0.3 mm/m

Power supply

2 batteries type LR6 (AA)

Warming uptime

10 min

Operating time

15 hours




With the NXA Ultimate you have covered any kind of angle that needs to be covered of your machinery. It includes shaft alignment applications as well as geometric applications, hence, as the name says, it is an ultimate measurement tool.
$5,280.00
New Fixturlaser EVO Laser shaft alignment - Sale !! (EVO)

In spite of challenging conditions, the instrument performs precise measurements with two wireless measurement units, large detectors, and powerful lasers.

Simplicity in your hands

The laser-based shaft alignment tool, EVO, is all about evolved simplicity.

It is a product without the frills and the bling, bling that stays true to our core values: simplicity, user-friendliness, and innovative techniques, while at the same giving you the power of alignment in your hands.

The EVO offers a compact display unit with a 5” color touch screen. It is slim and balanced, allowing you to hold it in one hand, leaving your other hand free to touch the screen icons and rotate the shafts.

It has a clean and color-coded graphic user interface that helps the maintenance professional throughout the measurement and alignment process without any hassles and stress.

The EVO offers an extensive shaft alignment package, including the Feetlock function that is useful in base/bolt-bound machine situations.

An All Digital Tool

Acoemwas the first to use the digital CCD technology in sensors of this kind and, hence, the first to deliver a digital shaft alignment system to the market.

With a 30 mm CCD detector, you are able to obtain unparalleled repeatability together with outstanding precision alignment, regardless of ambient light and measurement environment. The benefit over the older analog PSD technology is unmatched with regards to the capability of filtering and refining the measurement data.

Another benefit is the size of the sensors that are very compact, only 33 mm thick, and therefore easy to fit into even the tightest spaces.

Adaptive User Interface with the VertiZontal Moves™

Acoem has developed an adaptive user interface, i.e. a user interface that actually tells you what to do based on your measurement results. With the VertiZontal Moves™ feature, we have brought to you one of the most innovative and time-saving features in the shaft alignment world.

The adaptive user interface shows how much a misaligned machine requires to be adjusted by adding or removing shims at the machine’s feet. When proceeding with the measurement, you no longer need to remeasure inbetween the vertical and the horizontal adjustment during the adjustment process.

The following horizontal adjustment is promptly carried out with real values displayed.

Pick Your View with the Screen Flip

Confusing when the display screen does not show the machine from the same angle as yours? No problem, we have a solution for that as well – the Screen Flip. It enables you to see the machine set-up from the actual view that you have of the machine.

EVO – Package with Case

  • Display unit
  • 2 pcs of digital smart sensors
  • 2 pcs of V-brackets, complete with chains
  • Rod kit
  • 2 pcs of chains 8 mm (length=970 mm)
  • Power cable, EU and US
  • USB cable with snap ferrite, A-mini, 2 m
  • Power supply 5 USB ports
  • 3 pcs of USB cables A-mini B, 0,5 m
  • Tape measure 5 m
  • 2 pcs of angled universal tools
  • NXA manual – English version


Tecnical specification

EVO*
Weight, including all standard parts5,4  kg (11,9 lbs)
Storage temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
Material:High Impact ABS Plastic
Weight (empty):2,5 kg (5,5 lbs)
Environmental protection:Dust-, Water- (5 m), Air-tight with air pressure compensation valve
Drop-test (empty):3 m onto concrete floor
Storage Temp (empty):-40 to 80 °C
Accessories:Optional shoulder strap and backpack
Dimension:415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)
Display Unit
Housing MaterialBrushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp0 to 40°C   ( 32 to 104°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Relative humidity10 – 90%
Weight362 g (12,8 oz)
Dimensions103mm x 181mm x 29 mm (4,0 in x 7,1 in x
x 1,1 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Flash storage memory500 Mb
DisplayColour TFT-LCD backlit, sunlight-readable,
Display size5” (127mm) diagonal (111 x 63 mm)
Display resolution480×272 pixels
Color depth262 000 colors
Interface5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope
Peripherals1 USB 2.0 mini port (IP 67)
Wireless communicationClass I Bluetooth transmitter with multi-drop capability
Power supplyHigh-performance rechargeable Li-Ion battery or external power supply
Operating time8 hours continuous use
Battery Charging time (system off, room temperature)8 h
LED indicatorsUnit state and  battery state indicators
SoftwareLicense key upgradeable.
Standard softwareShaft Alignment Horizontal Machines
(Clock method and Tripoint)
Shaft Alignment Vertical Machines
(Clock method)
Machine Defined Data
Softcheck
Target Values
Feet Lock
Memory Manager
Global Settings


Digital Laser Sensors
Housing MaterialAnodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp-10 to 50°C   (14 to 122°F)
Storage Temp-20 to 70°C ( -4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp0 to 40°C   ( 32 to 104°F)
Relative humidity10 – 90%
Weight212 g (7,5 oz)/188 g (6,6 oz)
Dimensions92 mm x 77 mm x 33 mm
(3,6 in x 3,0 in x 1,3 in)
Environmental protectionIP 65 (Dust-tight and protected against water jets)
Laser650 nm class II diode laser
Laser line fan angle
Laser line width (1/e2)1.6 mm
Laser line divergence (full angle)0.25 mrad
Laser power< 1 mW
Measurement distanceUp to 10m
Detector2nd gen. digital sensor
Detector length30mm ( 1,2 in )
Detector angular subtense30mrad/m (3mm/100mm per meter)
Detector resolution1 µm
Measurement accuracy0,3% ± 7 µm
Signal processingDigital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protectionOptical filtering and digital ambient light signal elimination
InclinometerDual High-Performance MEMS inclinometers
Inclinometer resolution0,01°
Inclinometer accuracy±0,2°
Gyroscope6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy±1°
Total measurement axis’s (M3 S3 unit)14
Wireless communicationClass I Bluetooth transmitter
Communication range10 m (33 ft)
Peripherals – User accessible1 USB Mini port (IP 67);
Charging: 5V, 0,5A
Communication: with separate USB/RS 485 adapter cable
Power supplyHigh-performance Li-Ion battery or external power.
Operating time17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)8 h
LED indicatorsUnit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety
Shaft brackets
FixtureV-fixture with non-twisting chain, width 20 mm (0,79 in)
MaterialAnodized aluminum
Shaft diameterØ 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods4 pcs 100 mm (3,9 in) and
4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)



In spite of challenging conditions, the instrument performs precise measurements with two wireless measurement units, large detectors, and powerful lasers.
$2,525.00
New FIXTURLASER ECO Laser Shaft Alignment System - Sale !! (ECO )

What you get, when you buy a ECO system:

  • Integrated Bluetooth
  • Lifetime warranty
  • Pre-mounted sensors
  • A 4″ color screen
  • VertiZontal™ Moves
  • Screen Flip
  • 8 hours battery time, continuous use
  • CCD sensors technology
  • Live values during adjustment – True Live
  • IP65 classified
  • Slimmest smart sensors on the market

VertiZontal moves

The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. The VertiZontal Moves™ is an innovative and time-saving feature.


ECO – Package with Case

  • 1 ECO display unit
  • 2 ECO sensors, M/S
  • 2 pcs of V-brackets, complete with chains
  • 1 power supply 4 USB-port 5 VDC
  • 2 pcs of external power cables, EUR/US type/model, 2 m
  • 2 pcs of USB-cables A-mini B, 0,5 m black
  • 2 pcs of USB-cables A-micro B, 1,5 m black
  • 1 Tape measure, 5 m
  • 2 Angled universal tools
  • 1 ECO manual – English version

Technical specification

ECO*
Weight including all standard parts4,8 kg (10,6 lbs) (Incl. case, excl. carton box.)
Storage temp-20 to 70°C
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Case
MaterialHigh Impact ABS Plastic
Weight (empty)2,5 kg (5,5 lbs)
Environmental protectionDust-, water- (5m), and airtight with air pressure compensation valve
Drop-test (empty)3 m onto concrete floor
Storage Temp(empty)-40 to 80 °C (-40 to 176°F)
Dimension415 mm x 325 mm x 180mm (16” x 13” x 7”)
Display unit
Housing MaterialABS plastic
Operating Temp0 to 50°C
Storage Temp-20 to 70°C
Long term storage tempRoom temp. 18 to 28°C (64 to 82°F)
Relative humidity10 – 90%
Weight346 g
Dimensions180,9 x 105,7 x 33,9 mm (7,1” x 4,2” x 1,3”)
Environmental protectionIP 65
Flash storage memory500 Mb
DisplayColor TFT-LCD backlit
Display size4” (102 mm) diagonal (84 x 56 mm)
Display resolution400 x 272 pixels
Color depth16 000 000 colors
InterfaceMembrane Switch Keyboard
Peripherals1 USB micro port (IP 67)
Wireless communicationBluetooth (2,4 GHz)
Power supplyRechargeable Li-Ion battery or external power supply
Operating time8 hours continuous use
Battery Charging time (system off, room temperature)8 h
Battery Charging Temp0 to 40°C


Digital Laser Sensors
Housing MaterialAnodized Aluminum frame and ABS plastic over-molded with TPE rubber
Operating Temp0 to 50°C  (32 to 122°F)
Storage Temp-20 to 70°C (-4 to 158°F)
Long term storage tempRoom temp. 18 to 28°C  (64 to 82°F)
Battery Charging Temp0 to 40°C   (32 to 104°F)
Relative humidity10 – 90%
WeightM: 200 g (7,1 oz) with battery
S: 188 g (6,6 oz) with battery
Dimensions86 mm x 77 mm x 33 mm (3,4” x 3,0” x
x 1,3”)
Environmental protectionIP 65
Laser650 nm class II diode laser
Laser power< 1 mW
Measurement distanceUp to 3 m
DetectorDigital line sensor
Detector active length20 mm
Displayed resolution0,01 mm
Measurement accuracy1% ± 1 digit
Inclinometer resolution
Inclinometer accuracy±3°
Wireless communicationBluetooth (2,4 GHz)
Communication range10 m (33 ft)
Peripherals1 USB Mini port (IP 67)
Charging: 5V, 0,5A
Power supplyLi-Ion battery or external power.
Operating time:12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)8 h
LED indicatorsWireless communication, laser transmission, and battery status indicators
Laser safety*



The all-digital wireless ECO is an entry-level system dedicated to horizontal shaft alignment. With wireless sensor units, a 4” color display, rechargeable batteries, and an IP65 design that withstands harsh environments, you have a laser alignment system at an affordable price!
$3,050.00
Per Page      1 - 12 of 12
  • 1