Fixturlaser EXO

A Smart Alignment System Certified for Work in Hazardous Areas

Our core values, GuideU and Alignment Intelligence, have led to the development of several first industry functions, where True Live and VertiZontal Moves™ are unique on the market for laser-based shaft alignment tools. They bring ease of use to our end users, which above all facilitates easy precision shaft alignment, on-the-job time saving, improved reliability, and more importantly, money savings.

With the FIXTURLASER EXO, you get all this in an intrinsically safe shaft alignment package.

Easy-to-Use Shaft Alignment in Hazardous Areas

TRUE LIVE

You Always Know Your Machine’s Position with the FIXTURLASER EXO

The True Live feature will deliver live measurement values showing the machine’s exact position. Did you interrupt the laser beam? Or move the machine’s position out of the detector range? Not a problem, our smart sensors will resume with an updated machine position and always deliver live values to you.

Industry-leading EX certified smart sensors

• Integrated Bluetooth for wireless communication between the display unit and smart sensors
• 30 mm digital sensor detector line laser eliminates rough alignment, which results in a short setup time
• Built-in dual inclinometers to detect backlash and obtain angular values during measurement in horizontal alignment
• Thinnest smart sensors on the market
• Premounted fixtures give a short setup time
• Instant battery check – in both on and off mode
• II 3G Ex ic op isIIC T4 Gc

EX certified tablet with an app and icon-based user interface

• Icon-based and color-coded user interface a language-free user interface
• True live values during adjustment
• Animated arrows indicating adjustment orientation and misalignment magnitude
• Integrated Bluetooth for wireless communication between the display unit and smart sensors
• ATEX/IECEx Zone 2 certified including ruggedized IP68 tablet device

uideU

Our Graphical User Interface, Your Alignment Guide

Our patented icon- and app-based, and color-coded user interface, GuideU, makes it easy to measure, align, and document each job. In order to minimize the risk of operator errors, we developed an adaptive user interface for the FIXTURLASER EXO system. It guides the user throughout the job in logical and easy-to-follow steps. It will deliver measurement and correction values based on what the system finds during the alignment process.

This eliminates confusion for less-experienced users and provides ease of access throughout a measurement with the FIXTURLASER EXO system. To add to the enhanced user experience, we have given the interface a game-like 3D graphic look facilitating the unmistakable interpretation of any misalignment error.

Our icon-driven, language-free alignment systems produce measurement reports easily understood by all users, regardless of their language.

Vertizontal Moves

Measure Once, Move in Two Directions

The VertiZontal Moves™ feature displays exactly how much a misaligned machine needs to be adjusted and in which direction, by adding or removing shims to the machine’s feet. No more re-measuring between the vertical and the horizontal phases to correct the horizontal misalignment.

This industry-first function saves time and ensures accuracy the first time around. Time savings mean cost savings for the maintenance department, the production department. In short, savings for the entire company.

FIXTURLASER EXO – Package with Case

• Tablet EX
• 2 pcs of digital smart sensors EX
• 2 pcs of V-brackets, complete with chains EX
• Rod kit
• 2 pcs of chains, 8 mm (length=970 mm)
• Power cable, EU and US
• USB cable with snap ferrite, A-mini, 2 m
• Power supply 5 USB ports
• 3 pcs of USB cables A-mini B, 0,5 m
• Tape measure 5 m
• 2 pcs of angled universal tools
• Fixturlaser NXA manual – English version

Technical specification

Fixturlaser EXO – Package with Case*
Weight including all standard parts	6,6 kg (14,6 lbs)
Storage temp	-20 to 70°C (-4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	Anodixed aluminum/plywood
Weight (empty)	4,0 kg (8,8 lbs)
Dimension	370 mm x 270 mm x 205 mm (14,6 in x 10,6 in x 8,1 in)

Digital Laser Sensors
Housing Material	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	0 to 50°C   (32 to 122°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp	5 to 40°C   (41 to 104°F)
Relative humidity	10 – 90%
Weight	M4 Ex: 220 g (7,8 oz) S4 Ex: 190 g (6,7 oz)
Dimensions	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 5m
Detector	2nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing:	Digital signal processing with sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Total measurement axis’s (M4 S4Ex units)	14
Wireless communication:	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A
Power supply	High-performance Li-Ion battery or external power.
Operating time:	12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	5 hours
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material	Anodized aluminum
Shaft diameter	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

It is a shaft alignment revolution

A revolution in shaft alignment as well as a revolution in usability with the  NXA Pro – a digital laser based shaft alignment system!

The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.

Alignment Intelligence

The NXA Pro system represents over 30 years of laser-based shaft alignment innovation. Through Alignment Intelligence, maintenance professionals can do their jobs more efficiently and achieve better results.

Adaptive User Interface for Smart Sensors

You will be guided through the measurement and alignment process of your machines using the adaptive user interface of the  NXA Pro.

OmniView

The graphical user interface is shown off on a 6,5” transreflective display screen with icons and symbols to guide you, in other words, no text is involved.

The adaptive user interface will guide you throughout the measurement and alignment process.

We have fitted the NXA Pro with gyros and can, therefore, adapt the screen view from the same side that the user is positioned – our OmniView™ function, i.e. the system knows where it is in relation to the machine.

VertiZontal Moves

The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time-strained maintenance world!

Power management system

The NXA Pro has a power management system that will make your life so much easier! The display unit has a 10 hour continuous battery operating time, and should the need arise during an alignment job; the display unit can be express charged to an 80% capacity in one hour. The sensor units will last for 24 hours minimum thanks to the long-life batteries.

Time-saving technology

The NXA Pro’s sensor units have graduated to the 2nd generation sensor. This sensor version improves the tolerance for detrimental external factors, such as vibrations and ambient light, and delivers the most accurate and precise measurement values compared to any other system. Measurement values are automatically registered throughout the entire measurement process. We have integrated line laser with the sensor and this combination virtually eliminates rough alignment, a huge time saver.

Very compact, only 33,5 mm in width, the sensor units will fit in the tightest spots. The sensor units contain long-life batteries, Bluetooth communication, and gyroscopes. The gyroscopes make it possible to measure according to the Tripoint Method in the vertical shaft alignment application, something that no other shaft alignment instrument is capable of!

NXA Pro – Package with Case

• Display unit
• 2 pcs of digital smart sensors
• 2 pcs of complete V-brackets
• 2 pcs of magnetic V-brackets
• 2 pcs of chains 8 mm 60 links
• Rod kit
• Extension fixture, 49 mm
• Magnetic base
• Tape measure 5 m
• 2 pcs of angled universal tools
• USB stick
• Charger for display unit and sensors
• NXA manual – English version

Techincal specification

NXA Pro*
Weight including all standard parts	7,7 kg (17 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, Water- (5m), Air-tight with air pressure compensation valve
Drop test (empty)	3m onto concrete floor
Storage Temp(empty)	-40 to 80 °C
Dimension	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing Material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp, system off	0 to 38°C   ( 32 to 100°F)
Battery Charging Temp, system on	0 to 32°C   ( 32 to 90°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	1,2 kg (2,6 lbs) with battery
Dimensions	124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Processor	1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory	256 Mb
Flash storage memory	8 Gb >100 000 measurements
Display	Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size	6,5” (165mm) diagonal (133 x 100 mm)
Display resolution	Full VGA 640×480 pixels
Color depth	262 000 colors
Interface	6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible	1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible	1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time	10 hours continuous use (with 50% LCD backlight)
Battery Charging time (system off, room temperature)	5 h
Xpress Battery Charging time (system off, room temperature)	1 h charge – 5 hours operating time
LED indicators	Unit state and 2×5 battery state indicators with instant battery check

Digital Laser Sensors
Housing Material:	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp:	-10 to 50°C   (14 to 122°F)
Storage Temp:	-20 to 70°C ( -4 to 158°F)
Long term storage temp:	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp:	0 to 40°C   ( 32 to 104°F)
Relative humidity:	10 – 90%
Weight:	192 g (6,8 oz) with battery
Dimensions:	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection:	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10m
Detector	2nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing:	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3 S3 unit)	14
Wireless communication:	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time:	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture:	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material:	Anodized aluminum
Shaft diameter:	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods:	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

Ultimate Measurement Tool for Optimal Operation Conditions

With a mix of shaft alignment and geometry applications, you are safeguarding your machinery’s operation condition. Regular maintenance checks or installations of new machinery, you have what you need in the NXA Ultimate.

Machine foundations need to be checked for any flatness faults, before the machine is actually installed, hence the flatness application. And once installed, the machine’s alignment status must be measured. With everything verified to be perfectly aligned, you can also ensure the machinery’s optimal operation conditions.

Shaft alignment

The NXA Ultimate comes with technology enabling functions and capabilities, which in many cases are industry firsts, for example:

• CCD detectors with ultra high definition resolution.
• New sensor units with Bluetooth incorporated are the industry’s most compact, yet, they feature a 30 mm detector surface and line lasers.
• The OmniView™ feature keeps track of the position of both the user and the machine to show the screen display from the user’s perspective, thanks to the built-in gyroscope (6-axis MEMS Inertial Motion Sensor) in the display unit.
• Ability to keep track of the position of the sensors in both the vertical and horizontal orientation, and any inclination in-between, when performing a shaft alignment, thanks to the built-in gyroscope in the sensor units. Hence, you are then able to perform a shaft alignment on vertically mounted machines where it is not possible to do a 180° shaft rotation.
• Excellent power management – 10 hours on one charge.

Geometric Measurements

Acoem’s laser-based geometry system is characterized by its user-friendliness and versatility, such as:

• The graphic user interface is intuitive and 3D animated, with icons and color-coded symbols to guide you throughout the measurement and alignment process.
• Live values during measurement and simultaneous live adjustment, in both vertical and horizontal orientation (X and Y values), during the adjustment process.
• Measurement results in micron resolution.
• Post-measurement evaluation means that you can process saved measurement results in order to choose the best reference. This will result in as few corrections as possible.

The NXA Ultimate Package with Case

• Display unit
• 2 pcs of digital smart sensors
• 2 pcs of complete V-brackets with chains
• 2 pcs of magnetic V-brackets
• 2 pcs of chains 8 mm 60 links
• Rod kit
• Extension fixture, 49 mm
• Magnetic base
• R2 sensor/receiver
• Turnable sensor holder on magnetic base
• T21 transmitter with mounting magnet
• 2 pcs of angled tools
• Tape measure 5 m
• USB stick
• Chargers for display unit and sensors
• NXA Shaft alignment manual – English version
• NXA Geometry manual – English version

Technical specification

Dimensions

NXA Ultimate
Weight including all standard parts	7,7 kg (17 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, Water- (5m), Air-tight with air pressure compensation valve
Drop-test (empty)	3m onto concrete floor
Storage Temp(empty)	-40 to 80 °C
Dimension	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp	-10 to 50°C   ( 14 to 122°F)
Battery charging temp, system off	0 to 38°C   ( 32 to 100°F)
Battery charging temp, system on	0 to 32°C   ( 32 to 90°F)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	1,2 kg (2,6 lbs) with battery
Dimensions	124 mm x 158 mm x 49 mm (4,9 in x 6,2 in x 1,9 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Processor	1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory	256 Mb
Flash storage memory	8 Gb, >100 000 measurements
Display	Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size	6,5” (165mm) diagonal (133 x 100 mm)
Display resolution	Full VGA 640 x 480 pixels
Color depth	262 000 colors
Interface	6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible	1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible	1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time	10 hours continuous use (with 50% LCD backlight)
Battery charging time (system off, room temperature)	5 h
Xpress battery charging time (system off, room temperature)	1 h charge – 5 hours operating time
LED indicators	Unit state and 2 x 5 battery state indicators with instant battery check

Digital Laser Sensors
Housing material	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating temp	-10 to 50°C   (14 to 122°F)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Battery charging temp	0 to 40°C   ( 32 to 104°F)
Relative humidity	10 – 90%
Weight	192 g (6,8 oz) with battery
Dimensions	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x x 1,3 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10 m
Detector	2nd generation digital sensor
Detector length	30 mm ( 1,2 in )
Detector angular subtense	30 mrad/m (3 mm/100 mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3 S3 unit)	14
Wireless communication	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material	Anodized aluminum
Shaft diameter	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

R2 Sensor (receiver)
Housing material	Anodized aluminum and ABS plastic
Operating temperature	0 to 50°C (32 to 122°F)
Storage temperature	-20 to 70°C (-4 to 158°F)
Relative humidity	10 – 90%
Weight	172 g (6.07 oz)
Dimensions	94 mm x 50 mm x 44 mm (3.7 in x 2.0 in x x 1.7 in)
Environmental protection	IP 65
Detector	2-axis PSD
Detector size	20 mm x 20 mm (0.8 in x 0,8 in)
Detector resolution	1 µm
Measurement accuracy	1% ± 3 µm
Ambient light protection	Optical filtering and ambient light signal rejection
Inclinometer resolution	0.01°
Inclinometer accuracy	±0.1°
Wireless communication	Class I Bluetooth transceiver with multi-drop capability. BLE Bluetooth Low Energy (BT 4.0) and Classic Bluetooth.
Communication range	10 m (33 ft)
Connectors	1 USB Micro port (IP67) Charging: 5V, 0,5A
Power supply	High-performance Li-Ion battery.
Operating time	12 hours continuous use
Battery Charging time (system off, room temperature)	8 hours
Battery Capacity	10.4 Wh
LED indicators	Unit state, battery status, and Bluetooth status.

T21 Transmitter
Housing material	Anodized aluminum
Operating temperature	0 to 50°C (32 to 122°F)
Storage temperature	-20 to 70°C (-4 to 158°F)
Relative humidity	10 – 90%
Weight	1150 g (2.54 oz)
Dimensions	100 mm x 103 mm x 109 mm (3.9 in x 4.0 in x 4.2 in)
Laser	650 nm class II diode laser
Laser power	< 1 mW
Measurement distance	Up to 20 m (66 ft)
Laser sweep flatness	±0.02 mm/m
Angular prism accuracy	±0.02 mm/m
Spirit level resolution	0.3 mm/m
Power supply	2 batteries type LR6 (AA)
Warming uptime	10 min
Operating time	15 hours

FIXTURLASER EXO – Package with Case

• Tablet EX
• 2 pcs of digital smart sensors EX
• 2 pcs of V-brackets, complete with chains EX
• Rod kit
• 2 pcs of chains, 8 mm (length=970 mm)
• Power cable, EU and US
• USB cable with snap ferrite, A-mini, 2 m
• Power supply 5 USB ports
• 3 pcs of USB cables A-mini B, 0,5 m
• Tape measure 5 m
• 2 pcs of angled universal tools
• Fixturlaser NXA manual – English version

Technical specification

Fixturlaser EXO – Package with Case*
Weight including all standard parts	6,6 kg (14,6 lbs)
Storage temp	-20 to 70°C (-4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	Anodixed aluminum/plywood
Weight (empty)	4,0 kg (8,8 lbs)
Dimension	370 mm x 270 mm x 205 mm (14,6 in x 10,6 in x 8,1 in)

Digital Laser Sensors
Housing Material	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	0 to 50°C   (32 to 122°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp	5 to 40°C   (41 to 104°F)
Relative humidity	10 – 90%
Weight	M4 Ex: 220 g (7,8 oz) S4 Ex: 190 g (6,7 oz)
Dimensions	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 5m
Detector	2nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing:	Digital signal processing with sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Total measurement axis’s (M4 S4Ex units)	14
Wireless communication:	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A
Power supply	High-performance Li-Ion battery or external power.
Operating time:	12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	5 hours
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material	Anodized aluminum
Shaft diameter	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

NXA Pro – Package with Case

• Display unit
• 2 pcs of digital smart sensors
• 2 pcs of complete V-brackets
• 2 pcs of magnetic V-brackets
• 2 pcs of chains 8 mm 60 links
• Rod kit
• Extension fixture, 49 mm
• Magnetic base
• Tape measure 5 m
• 2 pcs of angled universal tools
• USB stick
• Charger for display unit and sensors
• NXA manual – English version

Techincal specification

NXA Pro*
Weight including all standard parts	7,7 kg (17 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, Water- (5m), Air-tight with air pressure compensation valve
Drop test (empty)	3m onto concrete floor
Storage Temp(empty)	-40 to 80 °C
Dimension	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing Material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp, system off	0 to 38°C   ( 32 to 100°F)
Battery Charging Temp, system on	0 to 32°C   ( 32 to 90°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	1,2 kg (2,6 lbs) with battery
Dimensions	124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Processor	1 GHz Dual-core main processor with ultra low power core for instant power management
RAM memory	256 Mb
Flash storage memory	8 Gb >100 000 measurements
Display	Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology
Display size	6,5” (165mm) diagonal (133 x 100 mm)
Display resolution	Full VGA 640×480 pixels
Color depth	262 000 colors
Interface	6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.
Peripherals – User accessible	1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67)
Peripherals – Distributor accessible	1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High performance, High-Temperature rechargeable Li-Ion battery or external power supply
Operating time	10 hours continuous use (with 50% LCD backlight)
Battery Charging time (system off, room temperature)	5 h
Xpress Battery Charging time (system off, room temperature)	1 h charge – 5 hours operating time
LED indicators	Unit state and 2×5 battery state indicators with instant battery check

Digital Laser Sensors
Housing Material:	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp:	-10 to 50°C   (14 to 122°F)
Storage Temp:	-20 to 70°C ( -4 to 158°F)
Long term storage temp:	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp:	0 to 40°C   ( 32 to 104°F)
Relative humidity:	10 – 90%
Weight:	192 g (6,8 oz) with battery
Dimensions:	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection:	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10m
Detector	2nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing:	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer:	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3 S3 unit)	14
Wireless communication:	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time:	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety*

Shaft brackets
Fixture:	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material:	Anodized aluminum
Shaft diameter:	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods:	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

What you get, when you buy a ECO system:

• Integrated Bluetooth
• Lifetime warranty
• Pre-mounted sensors
• A 4″ color screen
• VertiZontal™ Moves
• Screen Flip
• 8 hours battery time, continuous use
• CCD sensors technology
• Live values during adjustment – True Live
• IP65 classified
• Slimmest smart sensors on the market

VertiZontal moves

The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. The VertiZontal Moves™ is an innovative and time-saving feature.

ECO – Package with Case

• 1 ECO display unit
• 2 ECO sensors, M/S
• 2 pcs of V-brackets, complete with chains
• 1 power supply 4 USB-port 5 VDC
• 2 pcs of external power cables, EUR/US type/model, 2 m
• 2 pcs of USB-cables A-mini B, 0,5 m black
• 2 pcs of USB-cables A-micro B, 1,5 m black
• 1 Tape measure, 5 m
• 2 Angled universal tools
• 1 ECO manual – English version

Technical specification

ECO*
Weight including all standard parts	4,8 kg (10,6 lbs) (Incl. case, excl. carton box.)
Storage temp	-20 to 70°C
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material	High Impact ABS Plastic
Weight (empty)	2,5 kg (5,5 lbs)
Environmental protection	Dust-, water- (5m), and airtight with air pressure compensation valve
Drop-test (empty)	3 m onto concrete floor
Storage Temp(empty)	-40 to 80 °C (-40 to 176°F)
Dimension	415 mm x 325 mm x 180mm (16” x 13” x 7”)

Display unit
Housing Material	ABS plastic
Operating Temp	0 to 50°C
Storage Temp	-20 to 70°C
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	346 g
Dimensions	180,9 x 105,7 x 33,9 mm (7,1” x 4,2” x 1,3”)
Environmental protection	IP 65
Flash storage memory	500 Mb
Display	Color TFT-LCD backlit
Display size	4” (102 mm) diagonal (84 x 56 mm)
Display resolution	400 x 272 pixels
Color depth	16 000 000 colors
Interface	Membrane Switch Keyboard
Peripherals	1 USB micro port (IP 67)
Wireless communication	Bluetooth (2,4 GHz)
Power supply	Rechargeable Li-Ion battery or external power supply
Operating time	8 hours continuous use
Battery Charging time (system off, room temperature)	8 h
Battery Charging Temp	0 to 40°C

Digital Laser Sensors
Housing Material	Anodized Aluminum frame and ABS plastic over-molded with TPE rubber
Operating Temp	0 to 50°C  (32 to 122°F)
Storage Temp	-20 to 70°C (-4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C  (64 to 82°F)
Battery Charging Temp	0 to 40°C   (32 to 104°F)
Relative humidity	10 – 90%
Weight	M: 200 g (7,1 oz) with battery S: 188 g (6,6 oz) with battery
Dimensions	86 mm x 77 mm x 33 mm (3,4” x 3,0” x x 1,3”)
Environmental protection	IP 65
Laser	650 nm class II diode laser
Laser power	< 1 mW
Measurement distance	Up to 3 m
Detector	Digital line sensor
Detector active length	20 mm
Displayed resolution	0,01 mm
Measurement accuracy	1% ± 1 digit
Inclinometer resolution	1°
Inclinometer accuracy	±3°
Wireless communication	Bluetooth (2,4 GHz)
Communication range	10 m (33 ft)
Peripherals	1 USB Mini port (IP 67) Charging: 5V, 0,5A
Power supply	Li-Ion battery or external power.
Operating time:	12 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Wireless communication, laser transmission, and battery status indicators
Laser safety*

Fixturlaser Go Basic Features

• Intuitive interface: Guides users throughout the measurement, step by step.
• Large Screen: Durable transreflective 4" large monochrome LDC screen.
• ICON Based Interface= NO Text: No Language barriers.
• Express ModeTm: Measurement values are registered automatically, sampling up to 2079 points in three position.
• Documentation: Name your current alignment job and save it in the memory manager. It has the ability to store 350 measurements.
• 30 mm detector: No need for rough alignment. Biggest measurement area.
• Resume function: An exceptional power management system that will resume from where you left off.
• CCD Technology: High linearity, digital signal processing provides a very high degree of fault correction.
• Pre-mounted fixtures: Speeds up mounting and packing of the fixtures.

In spite of challenging conditions, the instrument performs precise measurements with two wireless measurement units, large detectors, and powerful lasers.

Simplicity in your hands

The laser-based shaft alignment tool, EVO, is all about evolved simplicity.

It is a product without the frills and the bling, bling that stays true to our core values: simplicity, user-friendliness, and innovative techniques, while at the same giving you the power of alignment in your hands.

The EVO offers a compact display unit with a 5” color touch screen. It is slim and balanced, allowing you to hold it in one hand, leaving your other hand free to touch the screen icons and rotate the shafts.

It has a clean and color-coded graphic user interface that helps the maintenance professional throughout the measurement and alignment process without any hassles and stress.

The EVO offers an extensive shaft alignment package, including the Feetlock function that is useful in base/bolt-bound machine situations.

An All Digital Tool

Acoemwas the first to use the digital CCD technology in sensors of this kind and, hence, the first to deliver a digital shaft alignment system to the market.

With a 30 mm CCD detector, you are able to obtain unparalleled repeatability together with outstanding precision alignment, regardless of ambient light and measurement environment. The benefit over the older analog PSD technology is unmatched with regards to the capability of filtering and refining the measurement data.

Another benefit is the size of the sensors that are very compact, only 33 mm thick, and therefore easy to fit into even the tightest spaces.

Adaptive User Interface with the VertiZontal Moves™

Acoem has developed an adaptive user interface, i.e. a user interface that actually tells you what to do based on your measurement results. With the VertiZontal Moves™ feature, we have brought to you one of the most innovative and time-saving features in the shaft alignment world.

The adaptive user interface shows how much a misaligned machine requires to be adjusted by adding or removing shims at the machine’s feet. When proceeding with the measurement, you no longer need to remeasure inbetween the vertical and the horizontal adjustment during the adjustment process.

The following horizontal adjustment is promptly carried out with real values displayed.

Pick Your View with the Screen Flip

Confusing when the display screen does not show the machine from the same angle as yours? No problem, we have a solution for that as well – the Screen Flip. It enables you to see the machine set-up from the actual view that you have of the machine.

EVO – Package with Case

• Display unit
• 2 pcs of digital smart sensors
• 2 pcs of V-brackets, complete with chains
• Rod kit
• 2 pcs of chains 8 mm (length=970 mm)
• Power cable, EU and US
• USB cable with snap ferrite, A-mini, 2 m
• Power supply 5 USB ports
• 3 pcs of USB cables A-mini B, 0,5 m
• Tape measure 5 m
• 2 pcs of angled universal tools
• NXA manual – English version

Tecnical specification

EVO*
Weight, including all standard parts	5,4  kg (11,9 lbs)
Storage temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)

Case
Material:	High Impact ABS Plastic
Weight (empty):	2,5 kg (5,5 lbs)
Environmental protection:	Dust-, Water- (5 m), Air-tight with air pressure compensation valve
Drop-test (empty):	3 m onto concrete floor
Storage Temp (empty):	-40 to 80 °C
Accessories:	Optional shoulder strap and backpack
Dimension:	415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

Display Unit
Housing Material	Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	-10 to 50°C   ( 14 to 122°F)
Battery Charging Temp	0 to 40°C   ( 32 to 104°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Relative humidity	10 – 90%
Weight	362 g (12,8 oz)
Dimensions	103mm x 181mm x 29 mm (4,0 in x 7,1 in x x 1,1 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Flash storage memory	500 Mb
Display	Colour TFT-LCD backlit, sunlight-readable,
Display size	5” (127mm) diagonal (111 x 63 mm)
Display resolution	480×272 pixels
Color depth	262 000 colors
Interface	5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare
Gyroscope	–
Peripherals	1 USB 2.0 mini port (IP 67)
Wireless communication	Class I Bluetooth transmitter with multi-drop capability
Power supply	High-performance rechargeable Li-Ion battery or external power supply
Operating time	8 hours continuous use
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state and  battery state indicators
Software	License key upgradeable.
Standard software	Shaft Alignment Horizontal Machines (Clock method and Tripoint) Shaft Alignment Vertical Machines (Clock method) Machine Defined Data Softcheck Target Values Feet Lock Memory Manager Global Settings

Digital Laser Sensors
Housing Material	Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber
Operating Temp	-10 to 50°C   (14 to 122°F)
Storage Temp	-20 to 70°C ( -4 to 158°F)
Long term storage temp	Room temp. 18 to 28°C (64 to 82°F)
Battery Charging Temp	0 to 40°C   ( 32 to 104°F)
Relative humidity	10 – 90%
Weight	212 g (7,5 oz)/188 g (6,6 oz)
Dimensions	92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in)
Environmental protection	IP 65 (Dust-tight and protected against water jets)
Laser	650 nm class II diode laser
Laser line fan angle	6°
Laser line width (1/e2)	1.6 mm
Laser line divergence (full angle)	0.25 mrad
Laser power	< 1 mW
Measurement distance	Up to 10m
Detector	2nd gen. digital sensor
Detector length	30mm ( 1,2 in )
Detector angular subtense	30mrad/m (3mm/100mm per meter)
Detector resolution	1 µm
Measurement accuracy	0,3% ± 7 µm
Signal processing	Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode
Ambient light protection	Optical filtering and digital ambient light signal elimination
Inclinometer	Dual High-Performance MEMS inclinometers
Inclinometer resolution	0,01°
Inclinometer accuracy	±0,2°
Gyroscope	6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration
Gyroscope accuracy	±1°
Total measurement axis’s (M3 S3 unit)	14
Wireless communication	Class I Bluetooth transmitter
Communication range	10 m (33 ft)
Peripherals – User accessible	1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable
Power supply	High-performance Li-Ion battery or external power.
Operating time	17 hours continuous use (measuring)
Battery Charging time (system off, room temperature)	8 h
LED indicators	Unit state, laser transmission and 5 battery status indicators with instant battery check
Laser safety

Shaft brackets
Fixture	V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material	Anodized aluminum
Shaft diameter	Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains)
Rods	4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in)

The Easy-Laser E540 Shaft Alignment System is a precise and competent alignment system designed for your rotating machinery. You can track the status of your machinery with vibration level check, find prerequisites for alignment, measure and align in three easy steps, and document your results all with an easy to learn and use system. The E540 system gives you measurement programs for horizontal machines, vertical machines, and machine train alignment capabilities. With the large 5.7” colour display, you’ll have all the information you need during every step of alignment. Bluetooth communication technology, integrated rechargeable batteries, and TruePSD detectors — the E540 is your solution for machinery alignment.

Key Features:

• Easy to learn and use
• Compact measuring units for use on most machines
• All wireless units with built-in Bluetooth technology and integrated rechargeable battery
• Large 5.7” colour display
• Programs with both symbols and text makes measurement easy to understand
• TruePSD technology with unlimited resolution
• Dual PSD, dual laser beams, and dual inclinometers for superior control and accuracy
• Create PDF reports directly from the Display unit and save to USB memory
• Expandable and adaptable: a wide range of accessories means that you can adapt the system to your needs, now and in the future

Fixturlaser XA Pro Features

• Intuitive Interface: guides users throughout the measurement step by step
• Large Touch Screen: durable back-lit 6,4" large color touch screen
• Color Coded Results: green within tolerance, orange near tolerance, and red out of tolerance
• 3D Animations: arrows guide you by showing the direction of machine adjustment
• ICON based interface: [NO TEXT = NO LANGUAGE BARRIERS]
• Compound Moves: horizontal and vertical alignment accomplished without remeasuring
• Express Mode: measurement values are registered automatically, sampling up to 2079 points in three position
• Documentation: name your alignment and save it in the memory manager. Unlimited number of savings.
• 30 mm detector: no need for rough alignment. Biggest measurement area
• Wireless: Bluetooth* communication
• Resume Function: an exceptional power management that will resume to where you left off
• CCD Technology: UNAFFECTED BY SUNLIGHT, high linearity, digital signal processing gives high degree of fault correction
• Pre-mounted Fixtures: speed up mounting and packing of the fixtures
• Expandable: add more software and hardware packages, as your measurement needs change
• Machine Defined Data: machine configuration templates

The shaft alignment system has a large 5.7", bright colour display that clearly shows all the steps of the measurement. The measuring units have TruePSD-technology, which gives unlimited resolution. Twin laser beams, twin PSDs and twin inclinometers give you superb control of the measurement in all situations. The measuring units are incredibly compact featuring Bluetooth® Wireless technology, an integrated rechargeable battery and large 30 mm TruePSD detectors. This means that they are easy to install on most types of machines, even where there is limited space. The wireless technology gives you full freedom of movement around the machine that is to be aligned. Display unit, measuring units and fixtures are all very robust for the highest accuracy in demanding industrial environments.

It is possible to connect two very useful accessories to the system. With Vibrometer E285 it is possible to check the vibration level and bearing condition of the machine. Using E170 BTA you can check and align sheaves and pulleys with digital precision. You can document the measurements for vibration checks and belt alignment in the same way as for the normal shaft alignment programs. There is also a wide range of accessory brackets, such as magnet bases, axial magnet brackets and brackets for non-rotating shafts. The transportation case is equipped with recessed compartments for the accessories, which means that you can carry everything in one case. With the barcode reader the user can save many key operations where all machine dimensions, tolerances and compensation values are entered in one single operation, and the measurement can be started directly. At the first measurement, save the downloaded machine data and attach the barcode label to the machine. The barcode reader is an accessory.

Includes:
12-0700 - Display unit E-series E52
12-0777 - Measuring unit S
12-0776 - Measuring unit M
12-0016 - Shaft bracket with chain
12-0319 - Chain 900 mm
12-0059 - Set of rods (4x 60 mm)
01-0873 - Rod 120 mm
12-0495 - Strap for Display unit
05-0567 - Quick manual
03-0824 - Measuring tape 3m
03-0914 - USB Memory stick with EasyLink™ program
03-0822 - Cable USB A to B 1,8m
03-0821 - Battery Charger (100-240 V AC)
12-0750 - DC Split cable ,for charging
12-0751 - DC to USB adapter, for charging
05-0314 - CD with documentation
03-1007 - Case Plastic Shaft E530

The alignment and geometric applications programs that are included in the Fixturlaser XA Ultimate, complement each other. Properly aligned machine starts at the time of its installation, e.g. with checking that the machine foundation is flat before the machine is installed upon it. If the machine foundation is skewed or warped in any way, that will influence the machine's capability to function.

The new Fixturlaser XA features:

• No time-consuming setting of lasers and coarse alignment
• X-large (30 mm) detectors coupled with line lasers
• Automatic registration of measurement points
• Next step guidance with 3D Flash animations
• X-large high-resolution colour touch screen
• Real-time live machine adjustments
• Oversized key data and animated arrows
• All results calculated instantly Pre-mounted fixtures
• Export reports via USB jump drive

Available with Bluetooth wireless detectors.

Fixturlaser Express Alignment XA.

1 pc display unit
Art No: 1-0753
Series No: 76368

1 transmitter / sensor units
Art No: 1-0754
Serial No.: 67023

1 transmitter / sensor units
Art No: 1-0755
Serial No.: 57013

2 extra chains

1 set of bars

Power cords, instruction manual, CD manual included.