GE Inspection Technologies

• Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
• Easy to view in direct sunlight
• 11 hours battery operation

• Hi-resolution color LCD display produces ﾓAnalog Look and Performanceﾔ echo dynamics.
• 4 selectable vibrant display color schemes to match lighting conditions.
• Gates and gate functions are color coded for easy identification and fast adjustment.

• Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
• Auto CAL makes calibration fast & easy.
• 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
• 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
• 250 KHz to 25 MHz frequency range.
• RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
• 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
• 1 mm to 28 m (0.040ﾔ to 1100ﾔ) range (in steel) covers thin to lengthy acoustically clean materials.
• dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
• IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
• VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
• RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
• BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
• 19ﾔ Rack Mount Model.

• Color Leg allows easy identification of leg and skip distances for weld inspection
  • GRID mode dynamically changes bands of display backgroundcolors for each leg.
  • A-SCAN mode dynamically changes the color for each leg of the ﾓliveﾔ A-Scan
• Weld Rating Calculation simplifies the rating of weld indications according to AWS Specification D1.1. (Formula D = A ﾖ B ﾖ C).
• Trigonometric flaw location function with curvature correction automatically calculates depth, surface distance, and sound path to flaw along with the leg of the inspection when using angle beam probes. All TOF measurements can be displayed in mm, inches or µs.
• SmartView function along with variable persistence freeze modes displays the most important information (relevant shot) for a test.
• Real time (single shot) analog and TTL outputs handle a wide range of automated systems applications.
• Choose from Four Freeze Modes: ALL, Peak Std, Compare or Envelope for optimum waveform evaluation and comparison.
• Three Variable Persistence Modes are selectable in Freeze Envelope to visually assist flaw detection & evaluation for scanning and moving part inspections.
• Compare frozen reference wave-forms to live A-Scans in different colors to easily interpret test results.

• Store & preview a minimum of 200 user-named data sets with A-Scans for quick recall and instrument setup.
• UltraDOC 4 software program for bi-directional communication with a PC for easy storage of data sets with A-scan and documentation of test results.
• UltraMATEﾙ software program simplifies the transfer, storage, analysis, and documentation of thickness data.
• Reports with A-Scans are output directly to a variety of printers.

GE Phasor XS 16:64 Phased Array Ultrasonic Flaw Detector

The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a codecompliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.

When used in Phased Array mode, the operator can electronically control multiple beams from one probe. The precise beam control including angle, focus and size, results in improved probability of detection (POD) and sizing. With one scan from one contact location, greater area is covered and comprehensive data can be viewed in real time on a full color sector display. When compared to conventional Ultrasonic inspection, the productivity and cost savings from the Phasor XS are easily measured.

Productivity gains

When the inspection requires a different angle with conventional ultrasonic testing, the operator must change his probe and re-visualize the integration of the new information. A different time base and sensitivity level is represented. Although this is not a problem for the skilled operator, it takes time. Through the power of Phasor XS, these inefficiencies are drastically minimized.

Real time color imaging from the Phasor XS supplies an integrated cross-sectional visualization of the part originating from multiple angles. A single A-Scan can also be selected for display in combination with the image. With a single probe, you can achieve more than ever before – and in less time!

Overall, the Phasor XS provides:

• Improved area coverage, faster results
• More information from one scan of the part
• Better recorded result from the generation of an image
• One probe replicates the capabilities of many conventional UT probes and wedges
• Time and cost savings from reduced hours evaluating indications with multiple angles

Measurable time savings!

Some weld inspections require a complete scan with three separate angles. Using the Phasor XS can result in a time savings of two thirds!

Test quality improvements

Defect orientation is a prediction made in the development of a test procedure and an inspection angle is chosen based on this prediction. Beam spread is chosen purposely broad to account for some level of error in the prediction, so essentially it is a compromise.

With the Phasor XS, electronic control of the beam allows test procedures to be developed that will yield higher Probability of Detection (POD), in the same inspection time, by allowing the choice of an ideal beam over the full inspection area. The quality of the scan is improved and the Phasor XS’ full-color, real time sector display with selectable A-Scan supplies the standard accepted method for instant and reliable sizing.

Simple change over

Building Phased Array capabilities into a successful proven operating platform ensures the transition to Phased Array inspection will be cost effective. Phasor XS’ simple menu driven operation of basic Phased Array controls puts the technology within reach of the Level II field inspector. Data is easily interpreted and the cost of training is minimal.

Standard Features

An on board data set memory is combined with removable storage via an SD card for documentation and setup storage. This ensures your operators will be working with consistent setups to get brilliant results that you can see later on the screen or computer

The unique Sector Freeze mode allows review and storage of all the A-Scans behind the image. Select your beam of interest from all of the shots for separate display and improve your sizing with focal and angle control.

• Combined Phased Array and code compliant Conventional UT flaw detector
• Truly portable Phased Array – less than 4 kg (7 lbs)
• Electronically controlled and selectable beam angles, focus and size
• Simultaneous inspection with multiple beams from a single location
• Full color, real time sector display with a selectable ASCAN
• Fullscreen Bscan plus Display reverse and flip
• Rugged packaging to withstand heavy onsite use
• Snap shot image storage of sector images and ASCANS
• Dialog probes 16/64
• Delay law calculator
• Push button control for operation in a bag
• Simple operating scheme
• Image transfer via SD card

Specifications:

• GE Phasor XS 16:64 Phased Array Ultrasonic Flaw Detector (BC# -L/T*)
• Battery Pack
• AC Adapter/Charger
• User Manual On Cd-ROM
• Carrying Case (G)

• Portability
  • Small size, lightweight, robust, dust- and waterproof construction allow the instrument to be easily operated in confined spaces, areas of difficult access, and in harsh environments.
  • Can be operated with one hand, leaving other hand free for other tasks, such as maintaining probe in optimum position or holding on to ladders.
  • Light enough to be carried throughout a whole day’s shift.
  • Battery provides up to 6 hours operation. Can be recharged on- or off-board.
  • Several accessories to improve mobility are available: wrist strap, shoulder harness, belt holster.
• Easy-to-Read Screen
  • A display screen that is the same size as those in other GE flaw detectors, even though the instrument is much smaller than other instruments in the range
  • An 800 x 480 pixel display, which is better resolution than a standard DVD.
  • A screen with an optimized aspect ratio to ensure highly defined echo separation.
  • A screen that can be easily viewed, whether hand-held or desk-mounted.
  • A screen that has been ergonomically sized to help reduce eyestrain.
  • An integrated stand allows the user to optimize the viewing angle, when the instrument is desk- or benchmounted
  • AutoGate Threshold for faster measurement with optimum accuracy.
  • A-scan freeze mode function (for gate A and B) fascilitates working in difficult ergonomic conditions.
  • Display measurement indicators show both amplitude and distance to reduce risk of error
• Ease of Use
  • Pressure-sensitive joystick imported and adapted from the successful range of remote visual inspection and ultrasonic equipment offered by GE.
  • All controls within fingertip reach. User can dedicate function keys according to preference
  • A “Flip” function allows the instrument to be used equally well by left-handed and right-handed people.
  • A standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage.
  • The instrument’s 2 GB memory can be easily exchanged by SD cards up to 16 GB
  • Reports are produced in jpeg format so there is no need for special reading software.
  • Printable summary list of all parameters
  • Easy directory management on SD cards
  • Built-in menu customization tool allows to adapt the menu structure to two levels of users.
  • Smart notes function increases reporting efficiency.
  • Yearly calibration reminder for efficient quality management

• A robust molded rubber casing to withstand the harshest environments and significantly reduce downtime. The instrument is dust- and waterproof to IP67 and is tested to withstand shock and vibration
• A simple on-board data logger to collect and save thickness measurements or eventually attach the corresponding A-scan image.
• Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability.
• Automatic Gate Threshold for the 2 gates ensuring accurate measurements made under the same conditions
• Video recording upto 8 minutes allows live reporting.

• State-of-the-art electronics, including digital amplification, for a wide range of application benefits.
• A wide Pulse Repetition Frequency range allows use at low PRF to inspect forged parts without any “ghost” echoes and to inspect welds at high PRF when fast and regular scanning movement is required.
• Precise Time of Flight indication in µs.
• TrueDGS compatible.

• Customized versions of the USM Go are also available, specially adapted to meet specific inspection codes or applications. For example, an optional square wave pulser can be supplied for applications involving the inspection of highly attenuative material. The versions shown in the table are currently available. For more detailed information, please contact your local GE representative or visit www.ge-mcs.com.

• Trigonometric projections
• AWS
• DAC
• DGS

• Manual PRF adjustment
• Phantom echo indicator
• DGSS
• Backwall Echo Attenuator (BEA)

• High PRF (up to 2000 Hz)
• Lightweight: 850 g (1.87 lb)
• Small size and ergonomics

• RF Display
• 2 gates with B-start triggered with echo in gate A
• TCG correction with high slope 120 dB/µs
• Reflector depth indicated in layer

• Narrow band filters
• Low noise digital amplifier
• TCG correction with high slope 120 dB/µs
• Backwall Echo Attenuator (BEA)

Krautkramer USN 58R
The ultrasonic instrument for the workshop, even for automated inspections.

High-contrast, crystal clear

Optimum readability from any viewing angle, all this is provided by the EL display of the USN 58R. This display technology does not only make this ultrasonic instrument the best choice for shop use but also for outdoor applications at very low temperatures: the USN 58R loves the cold and operates even at -20 °C / -4 °F without any problem.

It goes without saying that the display can be further optimized depending on the application site: you can set the brightness low or high, or you can choose the inverted display mode for fatigueproof work. Thanks to the electronic parallax-free grid, you will see every detail even at an unfavorable viewing angle and from a greater distance.

Automatic, multi-channel

Requirements that the USN 58R is also able to meet: the instrument is qualified for automated applications by its two monitor gates provided with configurable real-time outputs - in combination with the "SmartView" feature which ensures maximum flaw detectability, especially at high scanning speeds.

Multi-channel test systems can be quite easily set up by synchronizing several instruments and, provided with the Interface Echo option, these systems are also suitable for an immersion test. This makes the USN 58R an economic solution in this extended field of application for portable ultrasonic instruments.

Universal, flexible

The attributes characterizing the USN 58R thanks to its other options: the Backwall Echo Attenuation feature, specifically including the backwall echo in the flaw evaluation by reducing the gain, makes the USN 58R a good choice, especially for the inspection of castings and forgings.

Another focal area of application is the weld inspection - of course with amplitude evaluation and precise flaw location on flat and curved components - or with the additional options DAC/TCG or DGS for ultrasonic testing according to the majority of national or international standard specifications.

Included : 

GE USN58R Ultrasonic Flaw Detector (BC# -L/T*)
BNC To BNC Cable
User Manual On CD-ROM
Carrying Case (G)

• Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
• Easy to view in direct sunlight
• 11 hours battery operation

• Hi-resolution color LCD display produces ﾓAnalog Look and Performanceﾔ echo dynamics.
• 4 selectable vibrant display color schemes to match lighting conditions.
• Gates and gate functions are color coded for easy identification and fast adjustment.

• Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
• Auto CAL makes calibration fast & easy.
• 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
• 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
• 250 KHz to 25 MHz frequency range.
• RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
• 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
• 1 mm to 28 m (0.040ﾔ to 1100ﾔ) range (in steel) covers thin to lengthy acoustically clean materials.
• dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
• IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
• VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
• RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
• BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
• 19ﾔ Rack Mount Model.

• Color Leg allows easy identification of leg and skip distances for weld inspection
  • GRID mode dynamically changes bands of display backgroundcolors for each leg.
  • A-SCAN mode dynamically changes the color for each leg of the ﾓliveﾔ A-Scan
• Weld Rating Calculation simplifies the rating of weld indications according to AWS Specification D1.1. (Formula D = A ﾖ B ﾖ C).
• Trigonometric flaw location function with curvature correction automatically calculates depth, surface distance, and sound path to flaw along with the leg of the inspection when using angle beam probes. All TOF measurements can be displayed in mm, inches or µs.
• SmartView function along with variable persistence freeze modes displays the most important information (relevant shot) for a test.
• Real time (single shot) analog and TTL outputs handle a wide range of automated systems applications.
• Choose from Four Freeze Modes: ALL, Peak Std, Compare or Envelope for optimum waveform evaluation and comparison.
• Three Variable Persistence Modes are selectable in Freeze Envelope to visually assist flaw detection & evaluation for scanning and moving part inspections.
• Compare frozen reference wave-forms to live A-Scans in different colors to easily interpret test results.

• Store & preview a minimum of 200 user-named data sets with A-Scans for quick recall and instrument setup.
• UltraDOC 4 software program for bi-directional communication with a PC for easy storage of data sets with A-scan and documentation of test results.
• UltraMATEﾙ software program simplifies the transfer, storage, analysis, and documentation of thickness data.
• Reports with A-Scans are output directly to a variety of printers.

The AutoSigma 3000 gives accurate operation in an easy to use package that is both light and rugged. Designed for operator convenience, the lightweight, battery powered unit is easy to carry and easy to hold during inspections. The 500kHz frequency allows inspection of thin materials using the standard probe. The 60kHz setting is the aerospace industry standard.

APPLICATIONS

• Identification and separating of non-ferrous (typically aluminum alloys) components
• Validation of in-service heat damage
• Verification of heat treatment
• Measurement of the density of powder metal parts

• High accuracy 0.8 to 110% IACS (0.45-64 MS/m) conductivity measurement /- 0.1 at 10% IACS
• Light weight at only 0.4kg
• Temperature compensation (0 to 40-deg C)
• Selectable Frequency (60 or 500 kHz)
• Clear Display with Back Light
• Data Logging (500 readings in up to 50 files)