GE Inspection Technologies

Sort By:  
The USM 36 Ultrasonic Flaw Detector is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate Waygate's patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. Another feature included is the 7" screen that makes viewing A-Scans efficient, with signals being easily viewed even in bright sunlight as well as flexible data storage with removable SD cards or USB ports.
£1,047.16
The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C).
£2,459.23
Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.
£3,093.87
The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a codecompliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.
£1,983.25
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
£1,784.93
Synchronics Provides Expert Electronic Repairs For KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector At Synchronics we have the experience in repairing KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector in a timely and cost effective manner. We provide free Quote for KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector sent to us for repair at our works. We provide an OEM level of quality service at a competitive, non-OEM price. We have the ability to repair and calibrate many KRAUTKRAMMER units from many different Manufacturers. With our state-of-the-Art technologies and dedicated technicians, our staff is able to ease the pain of any repair service order.
£805.20
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
£1,745.26
Presented by the universal ultrasonic instrument USN 58L: the transflective (i.e. contrast by external light) color LCD is the optimum choice for use in a bright environment. Even with direct sunlight, the display is still easily readable - an advantage that every operator will appreciate in field applications.
£1,261.35
Optimum readability from any viewing angle, all this is provided by the EL display of the USN 58R. This display technology does not only make this ultrasonic instrument the best choice for shop use but also for outdoor applications at very low temperatures: the USN 58R loves the cold and operates even at -20 °C / -4 °F without any problem.
£1,118.55
The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C).
£1,420.01
The AutoSigma 3000 gives accurate operation in an easy to use package that is both light and rugged. Designed for operator convenience, the lightweight, battery powered unit is easy to carry and easy to hold during inspections. The 500kHz frequency allows inspection of thin materials using the standard probe. The 60kHz setting is the aerospace industry standard.
£990.83
Used GE Krautkramer USM 36 Ultrasonic Flaw Detector - Sale !! (USM 36)
GE's Krautkramer USM 36 is the latest development in GE’s USM range of flaw detectors. It combines the 21st century operating platform with the reliable and robust hardware of GE’s well-established Krautkramer portable flaw detection instruments. It incorporates a range of innovative flaw detection features to ensure that this new instrument is adopted as the everyday workhorse of flaw detectors by NDT inspectors globally.
 
Largest Viewable A-Scan  Display in its Class
• An important improvement in the Krautkramer USM 36 is  its large 7 inch screen, with an 800x480 pixel resolution. The entire area is available to display crispy A-scans, making  it the best in its class. Signals can be easily viewed and accurately interpreted, even in bright sunlight, with tired eyes at the end of a long working day. 
 
Flexible Data Reporting  and Storage 
• As well as easy-to-interpret the crispy A-scans, data reporting on the Krautkramer USM 36 can also include screen shots and A-scan videos, where A-scans can be recorded for subsequent analysis or to provide proof of inspection. All data is stored on a removable SD-card and reports can be in jpeg or BMP format.
 
Simple and Efficient Operation
• The Krautkramer USM 36 uses the familiar rotary knobs of previous models but the function keys have now been minimized into a simple, intuitive 6-key keyboard, allowing simple and efficient operation 
• Inspection set-up is also easy. Not only for technicians who have used USM Go or USM Go for previous inspections, as set-up data is transferable directly from these instruments, which share the same user interface. This commonality of interface also ensures a rapid learning curve for technicians familiar with the USM Go instruments.
 
Comprehensive Connectivity
• Connectivity is a major feature of the Krautkramer USM 36. Data can be stored on removable SD-card or USB memory stick, either for record purposes or to allow data sharing. A VGA connection allows the instrument’s display  to be shown on an external monitor or on a projector screen for training purposes.
 
Can be Used in the Harshest of Environments
• The Krautkramer USM 36 is fully protected against dust and water ingress to IP66 and can be operated in ambient temperatures from -10°C to 55°C. It can be used in sandy deserts, frozen wastes and in the humid tropics 
• The new flaw detector weighs just 2.2 kg and is battery- or mains- operated. Its Li-ion battery has an operating life of more than 13 hours, with an integrated battery charger for those longer shifts.
 
Available in Three Versions
• The versatile instrument is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate GE’s patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. 
 
Applications:
 
The Krautkramer USM 36 has been developed for day-to-day use throughout the industrial spectrum, from weld inspection and corrosion measurement in the power generation and petrochemical industries, to castings and forgings inspection and thickness measurement in the automotive, metals and aerospace sectors  to the inspection of special materials.
 
Weld Inspection in the Power Generation and  Petrochemical Industries Intuitive tools facilitate analysis and the use of color on the ultra-bright, 7 inch screen allows significant display benefits  during weld inspection: 
 
• Monitor gates and curves are displayed in various colors; 
• Messages and alarms are displayed in red; 
• A-scans can be displayed in different colors to assist comparison; 
• Color display of all parameters involved in flaw location, including sound path, surface distance, depth position and leg number; 
• GE’s patented color coded display of legs for angle beam inspection.
 
Precise Thickness Measurement in the Automobile Industry 
The Krautkramer USM 36 provides precise thickness measurement, as the sound path differences are measured very accurately at the peaks of an echo sequence. 
 
Corrosion Measurement in the Power Generation and Petrochemical Industries 
Corrosion measurement can be carried out using dual element probes, where the screen displays both the thickness measurement and the A-scan, ensuring maximum reliability. A minimum capture mode provides the thinnest measured reading at the end of a continuous scan. An auto-freeze function, which minimizes the probe’s surface contact time, is used for measuring structures and components with hot surfaces.
 
Inspection of Forgings 
The instrument’s Phantom Echo Detection technology is used in the inspection of fine grained and long work pieces to ensure accurate detection of flaws but not Ghost Echoes.
 
Inspection of Special Materials 
The powerful square wave pulser which is an available option for the Krautkramer USM 36 provides excellent penetration of difficult materials, such as those sometimes used in  the aerospace and automobile industries.

What's In The Box:

(1) Lithium Ion Rechargeable Battery Pack
(1) Lithium Ion Battery Charger /AC Power Supply
(1) SD Card (2 GB)
(1) USB Download Cable
(1) Transport Case
(1) Quick Reference Operating Card
(1) Operating Manual on CD
(1) Certificate Of Conformity


The USM 36 Ultrasonic Flaw Detector is offered in three versions to meet the most standard inspection codes. The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration and can accommodate Waygate's patented trueDGS probe technology, which offers unrivalled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology. Another feature included is the 7" screen that makes viewing A-Scans efficient, with signals being easily viewed even in bright sunlight as well as flexible data storage with removable SD cards or USB ports.
£1,047.16
New GE Inspection Technologies USN 60 Flaw Detector - Sale !! (USN 60)
GE Inspection USN 60 Ultrasonic Flaw Detector
GE Inspection Technologies has optimized its USN 60 series for use in direct sunlight and operation at extreme temperatures. These new characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time.

The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the モsquare wave pulserヤ form a powerful portable ultrasonic inspection tool.

Optimized outdoor use design
  • Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
  • Easy to view in direct sunlight
  • 11 hours battery operation
Vibrant colors
  • Hi-resolution color LCD display produces モAnalog Look and Performanceヤ echo dynamics.
  • 4 selectable vibrant display color schemes to match lighting conditions.
  • Gates and gate functions are color coded for easy identification and fast adjustment.

User Preferred Features
  • Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
  • Auto CAL makes calibration fast & easy.
  • 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
  • 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
  • 250 KHz to 25 MHz frequency range.
  • RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
  • 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
  • 1 mm to 28 m (0.040ヤ to 1100ヤ) range (in steel) covers thin to lengthy acoustically clean materials.
  • dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
  • IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
  • VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
  • RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
  • BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
  • 19ヤ Rack Mount Model.

Wide range of applications

A 6 kHz pulse repetition frequency, real-time analog and TTL outputs makes the USN 60 flaw detectors series ideal for a wide range of automated systems testing applications. The exclusive SmartView feature displays even the shortest echoes for critical scanning and rotating part inspections.

The quality, durability, dependability and ease of use that you have come to expect of Krautkramerメs popular USN Series of instruments remains. From rugged field inspections to high resolution thin measurements, long acoustically clean materials, and immersion systems, the USN 60 flaw detector family extends the range of applications that a portable instrument can perform. Furthermore the selectable 450V Square Wave Pulser satisfies a wide range of tough-to-penetrate applications, such as difficult to penetrate metallic  applications and especially non-metals inspection like composite materials.

Tools for easy weld inspection
  • Color Leg allows easy identification of leg and skip distances for weld inspection
    • GRID mode dynamically changes bands of display backgroundcolors for each leg.
    • A-SCAN mode dynamically changes the color for each leg of the モliveヤ A-Scan
  • Weld Rating Calculation simplifies the rating of weld indications according to AWS Specification D1.1. (Formula D = A ヨ B ヨ C).
  • Trigonometric flaw location function with curvature correction automatically calculates depth, surface distance, and sound path to flaw along with the leg of the inspection when using angle beam probes. All TOF measurements can be displayed in mm, inches or µs.
  • SmartView function along with variable persistence freeze modes displays the most important information (relevant shot) for a test.
  • Real time (single shot) analog and TTL outputs handle a wide range of automated systems applications.
  • Choose from Four Freeze Modes: ALL, Peak Std, Compare or Envelope for optimum waveform evaluation and comparison.
  • Three Variable Persistence Modes are selectable in Freeze Envelope to visually assist flaw detection & evaluation for scanning and moving part inspections.
  • Compare frozen reference wave-forms to live A-Scans in different colors to easily interpret test results.

Documentation and recording
  • Store & preview a minimum of 200 user-named data sets with A-Scans for quick recall and instrument setup.
  • UltraDOC 4 software program for bi-directional communication with a PC for easy storage of data sets with A-scan and documentation of test results.
  • UltraMATEル software program simplifies the transfer, storage, analysis, and documentation of thickness data.
  • Reports with A-Scans are output directly to a variety of printers.

Specifications:
Range USN 600.040ヤ to 1100ヤ (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
Material VelocityContinuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
Display Delay-20 to 3498 µs in steel (dependent on range)
Probe Delay/Zero Offset0 to 999.9 µs
Damping50, 75, 150, 500 ohms
Gain0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked
Test ModesPulse echo, dual, and thru-transmission
PulserSquare wave excitation pulse
Pulse Voltage (Square wave pulser mode)50 to 450 V scrollable in 10 V adjustments
Pulse Width (Square wave pulser mode)Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode)Low, High
Pulse Repetition Frequency USN 60Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
Bandwidth (amplifier bandpass)0.25 to 25 MHz with 10 selectable settings including broadband
Gate MonitorsTwo independent flaw gates controllable over entire sweep range
Measurement ModesZero-to-first, multi-echo with selectable flank or peak detection
RectificationPositive halfwave, negative halfwave, fullwave, RF
Reject (suppression)0 to 80% linear
UnitsInch, millimeter, or microsecond selectable
Operating Temperature-20° to 55°C (-4° to 130°F);
-25° to 70ºC (-13° to 158 º F ) storable
LanguagesSelectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian
Probe ConnectorsBNC or Lemo
KeypadInternational symbols
Battery PowerLithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable
Battery Life11 hours on Li-Ion battery pack
Size11.1ヤ W x 6.75ヤ H x 6.25ヤ D (282 x 171 x 159 mm)
Display640 x 480 pixels Color LCD 132.48 x 99.36 mm
Weight6.6 lbs. (3.0 kg) Li-Ion battery;
3.5 lbs.(1.6 kg) without battery
Color LegEasy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors
Weld Rating CalculationSimplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)
Dust Proof/DrippingWater ProofAs per IEC 529 specification for IP54 classification
ComplianceEMC/EMI: EN 55011:2007, EN 61000-6-2:2005 Ultrasound: EN 12668, ASTM E317


What's In The Box:

(1) Lithium-ion battery pack, 12 Ah, in battery lid
(1) Power supply/charger unit
(1) Protective screen foil
(1) Operating manual
(1) CD-ROM with application for firmware upgrade download
(1) Manufacturer’s certificate
The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C).
£2,459.23
Used General Electric Mentor UT Phased Array Flaw Detector - Sale !! (Mentor UT)
The entire UT flaw detector system is housed in a glove-friendly touchscreen tablet that’s as easy to use as a smartphone. Pre-loaded Mentor Create software is fully customizable, allowing for user-defined menus and workflows (apps) for step-by-step guidance through the inspection process– from calibration to probe location to analysis. Confident and educated users mean that even the most complex inspections are performed consistently every time. 

Mentor UT is the first ultrasonic testing device to easily allow wireless connectivity and live streaming, so inspectors can get real-time second opinions when they need them. That same wireless cloud connectivity enables Mentor UT to remotely generate comprehensive inspection reports on users’ desktops with the click of a button.

User-defined menus can walk technicians through every step of any inspection - from probe selection and calibration to reporting - ensuring consistency across your inspections, every time, from every inspector. And with the flexibility to load multiple workflows on one device, you can guarantee easy access to the right apps for any inspection.

Highlights

Benefits

Conveniently upload & analyze your inspection data on your computer
User-defined menus walk technicians through every step of any inspection
Flexibility to load multiple workflows on one device
Remote communication between experts and inspector

Features

Remote calibration-capable
High-performance design
Rugged durability
Intuitive operation

Applications

Customize or create inspection “apps” for your unique testing procedures, industry applications, and experience levels

Mentor UT Features

Mentor UT was designed around user needs. Its intuitive glove-friendly touch screen and a durability rating of IP65allow for more accurate and efficient inspections, under any industrial conditions. 

Perform inspections confidently using Mentor UT’s powerful 32:32 phased array flaw detector (upgradable to 32:128)with conventional UT channel and 18kHz pulse repetition frequency (PRF).

Ensure that UT inspections are performed consistently every time by custom-tailoring workflows (apps) to guide users through the calibration and inspection process step by step. On-board wireless connectivity and data export capabilities streamline one-touch reporting and analysis (offline analysis software included).

On-demand live support empowers inspectors to make on the spot maintenance decisions anywhere, anytime.

Mentor UT also features unmatched probe versatility. Choose from commonly found Tyco or Ipex probe connection options, or industry-standard Phasor-style connector for improved probe compatibility.

This device also easily pairs with Waygate Technologies' industry-leading dual-element linear DM probes for corrosion inspection, linear array probes for weld testing and composite inspection, as well as a wide variety of commercially available scanners. 

Included :

1 Each Case For Main Unit (1 OF 5) 
1 Each GE Brand Pouch 
1 Each 32:32PR Phased Array Flaw Detector, 1024 Laws, 8 Groups, 10Hz-20kHz PRF, 0-78dB Gain, 16 Points TCG 
1 Each Shoulder Strap 
1 Each Hand Strap 
1 Each AC ADAPTER E119932-C AWM 2464 300V 16AWG VW-1 
2 Each Battery Pack for GE Mentor Unit 
1 Each Battery Charger 
1 Each Mentor Software, Manual, & Quick Start Guide 
1 Each Cover for Phased Array Flaw Detector 
1 Each 5MHz Scanner for Mentor UT Phased Array Flaw Detector, 32 Elements, 1.5mm Pitch, Corrosion Mapping 
1 Each GENE-DMCABLE_3M_TOP | MODULAR PROBE (S/N 19J02D55) 
1 Each MODULAR PROBE(S/N 19KOOURD) 
1 Each S/N 19H0003M 32:128PR Array Add-On for Mentor UT Phased Array Flaw Detector 
1 Each (2 OF 5) CASE FOR 100N3901 
2 Each (3 OF 5)(4 OF 5) PLASTIC CASES 
1 Each Pelican 1400 (5 of 5) 
1 Each Powercord for SPU65-105 Ac Adapter ROHS Compliant 10A 125V

Also you can check : Used GSSI StructureScan Pro SIR 4000 Control Unit - Sale !!

Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.
£3,093.87
Used GE Inspection Phasor XS 16:64 Phased Array Flaw Detector - Sale !! (Phasor XS)

GE Phasor XS 16:64 Phased Array Ultrasonic Flaw Detector

 

The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a codecompliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.

When used in Phased Array mode, the operator can electronically control multiple beams from one probe. The precise beam control including angle, focus and size, results in improved probability of detection (POD) and sizing. With one scan from one contact location, greater area is covered and comprehensive data can be viewed in real time on a full color sector display. When compared to conventional Ultrasonic inspection, the productivity and cost savings from the Phasor XS are easily measured.

 

Productivity gains

When the inspection requires a different angle with conventional ultrasonic testing, the operator must change his probe and re-visualize the integration of the new information. A different time base and sensitivity level is represented. Although this is not a problem for the skilled operator, it takes time. Through the power of Phasor XS, these inefficiencies are drastically minimized.

Real time color imaging from the Phasor XS supplies an integrated cross-sectional visualization of the part originating from multiple angles. A single A-Scan can also be selected for display in combination with the image. With a single probe, you can achieve more than ever before – and in less time!

 

Overall, the Phasor XS provides:

  • Improved area coverage, faster results
  • More information from one scan of the part
  • Better recorded result from the generation of an image
  • One probe replicates the capabilities of many conventional UT probes and wedges
  • Time and cost savings from reduced hours evaluating indications with multiple angles

 

Measurable time savings!

Some weld inspections require a complete scan with three separate angles. Using the Phasor XS can result in a time savings of two thirds!

 

Test quality improvements

Defect orientation is a prediction made in the development of a test procedure and an inspection angle is chosen based on this prediction. Beam spread is chosen purposely broad to account for some level of error in the prediction, so essentially it is a compromise.

With the Phasor XS, electronic control of the beam allows test procedures to be developed that will yield higher Probability of Detection (POD), in the same inspection time, by allowing the choice of an ideal beam over the full inspection area. The quality of the scan is improved and the Phasor XS’ full-color, real time sector display with selectable A-Scan supplies the standard accepted method for instant and reliable sizing.

 

Simple change over

Building Phased Array capabilities into a successful proven operating platform ensures the transition to Phased Array inspection will be cost effective. Phasor XS’ simple menu driven operation of basic Phased Array controls puts the technology within reach of the Level II field inspector. Data is easily interpreted and the cost of training is minimal.

 

Standard Features

An on board data set memory is combined with removable storage via an SD card for documentation and setup storage. This ensures your operators will be working with consistent setups to get brilliant results that you can see later on the screen or computer

The unique Sector Freeze mode allows review and storage of all the A-Scans behind the image. Select your beam of interest from all of the shots for separate display and improve your sizing with focal and angle control.

  • Combined Phased Array and code compliant Conventional UT flaw detector
  • Truly portable Phased Array – less than 4 kg (7 lbs)
  • Electronically controlled and selectable beam angles, focus and size
  • Simultaneous inspection with multiple beams from a single location
  • Full color, real time sector display with a selectable ASCAN
  • Fullscreen Bscan plus Display reverse and flip
  • Rugged packaging to withstand heavy onsite use
  • Snap shot image storage of sector images and ASCANS
  • Dialog probes 16/64
  • Delay law calculator
  • Push button control for operation in a bag
  • Simple operating scheme
  • Image transfer via SD card

 

Specifications:

Display Size Resolution6.5” VGA (640*480 pixel) color TFT, 60Hz refresh rate
Battery TypeCustom Li-Ion battery pack (3S6P configuration)
Battery Life4 hours minimum
Battery ChargingExternal charger that connects directly to the battery pack
External Power SupplyUniversal input (85 – 265V / 50 – 60 Hz)
Units of Measureinch and mm
SD Card MemorySealed compartment
Number of Cycles Focal LawsConventional Channel: 1
Phased Array Channels: 128 (max)
Pulse repetition frequencyConventional Channel: 15 to 2000Hz
Phased Array Channels: 15 to 7680Hz
Pulser TypeConventional Channel: Spike
Phased Array Channels: Bipolar Squarewave
Pulser VoltageConventional Channel: 300V (max)
Phased Array Channels: /-25V to /-75V
Pulser EnergyConventional Channel: Low, High
Phased Array Channels: n/a
Pulser Rise TimeConventional Channel: <15ns
Phased Array Channels: Not Specified
DampingConventional Channel: 50, 500 and 1000
Phased Array Channels: n/a
Dual ModeConventional Channel: Off and On
Phased Array Channels: n/a
Receiver input CapacitanceConventional Channel: <50pF
Phased Array Channels:
Maximum input voltageConventional Channel: 40Vp-p
Phased Array Channels:
Bandwidth / Amplifier bandpassConventional Channel: 0.3 to 15MHz(-3dB points)
Phased Array Channels: 0.5 to 10MHz
Direct Documentation FormatConventional Channel: JPEG
Phased Array Channels: JPEG
Probe ConnectionsConventional Channel: 00 Lemo/ BNC Adaptor Supplied
Phased Array Channels: Custom Supplied
Physical ProbeConventional Channel: n/a
Phased Array Channels: 1 to 64
Virtual probeConventional Channel: n/a
Phased Array Channels: 1 to 16
Number of CyclesConventional Channel: 1
Phased Array Channels: 1 to 128
Pulser Width (1/2 Cycle)Conventional Channel: n/a
Phased Array Channels: 40 to 500ns
Pulser DelayConventional Channel: n/a
Phased Array Channels: 0 to 10.24us
Receiver DelayConventional Channel: n/a
Phased Array Channels: 0 to 10.24us
Receiver Input ResistanceConventional Channel: 1000ohm (dual mode)
Phased Array Channels: 220ohm
Analog GainConventional Channel: 0 to 110.0dB
Phased Array Channels: 0 to 40.0dB
Digital GainConventional Channel: n/a
Phased Array Channels: 0 to 50.0dB
Frequency SelectConventional Channel: 2.25MHz, 5MHz, LP and HP
Phased Array Channels: 2.25MHz, 5MHz, LP and HP
RectificationConventional Channel: PosHW, NegHW and Fullwave
Phased Array Channels: PosHW, NegHW and Fullwave
Measurement ResolutionConventional Channel: 5nsec
Phased Array Channels: 5nsec
Displayed ReadingsConventional Channel: A%A, A%B, SA/, SA^, SB/, SB^
Phased Array Channels: A%A, A%B, SA/, SA^, SB/, SB^
VGA outputConventional Channel: Yes
Phased Array Channels: Yes
SD Card MemoryConventional Channel: Yes
Phased Array Channels: Yes
RS 232 interfaceConventional Channel: Yes
Phased Array Channels: Yes
Auto Timebase CalibrationConventional Channel: Yes
Phased Array Channels: No
RejectConventional Channel: 0 to 80%
Phased Array Channels: 0 to 80%
TCGConventional Channel: 16 points (max) - 6dB/usec
Phased Array Channels: 16 points (max) - 6dB/usec
Sound VelocityConventional Channel: .0393 - .5905”/us[1000 – 15000m/s]
Phased Array Channels: .0393 - .5905”/us[1000 - 15000m/s]
RangeConventional Channel: 5m @ steel shear velocity
Phased Array Channels: 1m @ steel shear velocity
WeightConventional Channel: 7.5lbs (with batteries)
Phased Array Channels: 7.5lbs (with batteries)
SizeConventional Channel: 11.1”W x 6.75”H x 6.25”D (282 x 171 x 159mm)
Phased Array Channels: 11.1”W x 6.75”H x 6.25”D (282 x 171 x 159mm)
Display DelayConventional Channel: 2.5m @ steel shear velocity
Phased Array Channels: 1m @ steel shear velocity
GatesConventional Channel: A, B
Phased Array Channels: A,B,IF
Gate ThresholdConventional Channel: 5% to 95%
Phased Array Channels: 5% to 95%
Gate StartConventional Channel: [0.1mm to 2m]
Phased Array Channels: 0.1mm to 1m
Gate WidthConventional Channel: [0.1mm to 2m]
Phased Array Channels: 0.1mm to 1m
Gate ModesConventional Channel: Off, Pos, Neg[Off, Coincidence, Anticoincidence]
Phased Array Channels:
TOF ModesConventional Channel: Flank, Peak
Phased Array Channels: Flank, Peak
Scan typeConventional Channel: n/a
Phased Array Channels: Linear or Sector
Data visualization refresh rateConventional Channel: 60Hz
Phased Array Channels: 60Hz
Available viewsConventional Channel: Ascan
Phased Array Channels: Ascan only, Image only, Ascan Image
Dialog LanguagesConventional Channel: English, Spanish, German, French, Chinese, Japanese
Phased Array Channels: English, Spanish, German, French, Chinese, Japanese
Environmental tests
Cold Storage-20C for 72 hrs, 502.4 Procedure I
Cold Operation0C for 16 hrs, 502.4 Procedure II
Heat Storage70C for 48 hrs, 501.4 Procedure I
Heat Operation55C for 16 hrs, 501.4 Procedure II
Damp Heat / Humidity10 Cycles: 10hrs at 65C down to 30C, 10 hrs at 30C up to 65C, Transition within 2 hrs, 507.4
Temperature Shock3 Cycles: 4 hrs at –20C up to 70C, 4 hrs at 70C, Transitions within 5 minutes, 503.4 Procedure II
Vibration514.5-5 Procedure I, Annex C, Figure 6, General exposure: 1hr each axis
Shock6 cycles each axis, 15g, 11ms half sine, 516.5 Procedure I
Loose Cargo514.5 Procedure II
Transit Drop516.5 Procedure IV, 26 drops
IP54 / IEC529 Dust Proof / Dripping water proof as per IEC 529 
Environmental sealing testsIP54 / IEC529 … Dust Proof / dripping water proof as per IEC 529 specifications for IP54 classification
Enviromental
op temp
Low battery indication
Amplitude variation expected over battery life
Graticule
Architectural suppression
Linearity on timebase
Pulser, Voltage p to p, rise time, duration, fall time, Reverberation ampitude, frequncy spectrum plot
Amplifier and attenuator


INCLUDE : 

  • GE Phasor XS 16:64 Phased Array Ultrasonic Flaw Detector (BC# -L/T*)
  • Battery Pack
  • AC Adapter/Charger
  • User Manual On Cd-ROM
  • Carrying Case (G)
The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a codecompliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.
£1,983.25
New GE Inspection Technologies USM Go Plus Flaw Detector - Sale !! (USM Go Plus)
The GE Inspection Technologies USM Go Flaw Detector has been ergonomically designed to provide an instrument which is light, small and easy to use in the harshest inspection environments. Navigation is simplified using the proven graphical user interface (GUI) and D-pad (arrow key) control, allowing one-handed operation and fast and accurate adjustment.

Weld Inspection
Trigonometric projections
AWS
DAC
DGS

Inspection of Forgings and Castings
Manual PRF adjustment
Phantom echo indicator
DGS

Inspection of Rails

High PRF (up to 2000 Hz)
Lightweight: 850 g (1.87 lb)
Small size and ergonomics

Inspection of Composites
RF Display
2 gates with B-start triggered with echo in gate A
TCG correction with high slope 120 dB/μs
Reflector depth indicated in layer

USM Go Standard Model (GEIT1480179) Kits:

ASME Weld
MWB 45° angle beam transducer, 4MHz frequency, 8x9mm element (0056927)
MWB 60° angle beam transducer, 4MHz frequency, 8x9mm element (0056928)
MWB 70° angle beam transducer, 4MHz frequency, 8x9mm element (0056929)
MSEB dual element straight beam transducer, 4MHz, 3.5x10mm element (0057462)
Right Angle Lemo #00 to Lemo #00 cable (022-509-819)
Right Angle Lemo #00 to Dual Lemo #00, KBA 533 cable (022-509-821)
AWS Weld
AWS Gamma angle beam transducer, 2.25MHz frequency, 16x19mm element (113-292-601)
AWS 45° wedge, 63x63mm element (118-340-104)
AWS 60° wedge, 16x16mm element (118-340-105)
AWS 70° wedge, 16x16mm element (118-340-106)
Right Angle Lemo #00 to BNC cable (022-509-822)
General Purpose
MB S straight beam transducer, 4MHz frequency, 10mm element (0057749)
Right Angle Lemo #00 to Lemo #00 cable (022-509-819)

Features:
USM Go comes with D-pad (arrow key) control
DMS Go thickness gauge upgrade available
LCD display, 800 x 480 pixels
Flip function allows for left or right hand use
Pulser (EN12668 specifications)
Simulated spike pulser mode
120 to 300V amplitude
Uni-polar square wave (optional)
120 to 300V with 10V steps pulser voltage
30 to 500ns with 20ns steps pulser width
50 or 1000 Ohms damping
Vibration and shock tested
IP67 dustproof & waterproof

What's In The Box:

(1) Lithium Ion "on-board" rechargeable battery
(1) Battery charger /AC power supply
(1) LCD screen protectors (10-pack)
(1) SD card (8GB)
(1) Transport case
(1) Hand strap
(1) Quick reference card
(1) Operating manual on CD
(1) Certificate of conformity
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
£1,784.93
Used GE Krautkramer USM 35X Ultrasonic Flaw Detector Lemo Version - Sale !! (USM 35X)

The Instrument driver for USM 35X is required to exchange data and settings between the instrument USM 35X and the software AMPLECTOR Instrument Manager. All versions are supported USM 35X, USM 35X DAC, USM 35X S, USM 35X SD and instrument options (DAC/TCG, DGS, Data Logger with 3rd gate). 

Instrument data supported by the Instrument driver USM 35X: Instrument settings (ultrasonic parameters), A-scans, test results, and Data Recorder file types "Linear" and “Grid”.

Features

  • Straightforward display (as in Windows Explorer) of dataset files of the USM 35X in the AMPLECTOR Instrument Manager with detailed display of the most important instrument settings (ultrasonic parameters), A-scan and measurement values with extended information parameters
  • Straightforward display of Data Recorder files (as in Windows Explorer) with detailed display of Data Recorder type, statistics, as well as instrument settings and notes
  • Display of instrument information (for example software version)
  • Import and export of dataset files
  • The thickness alarm values (lower and upper threshold of the material thickness) can be subsequently set and changed in the AMPLECTOR Instrument Manager

Requirements

  • Operating system Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
  • Microsoft .NET Framework 4.5 or higher
  • Installed software AMPLECTOR Instrument Manager
  • Cable with RS-232-USB adapter for the connection between the instrument and the computer (not included in the standard package)

Standard package

  • Instrument driver software as download (no shipment on data media)
  • No Quick Start Guide necessary

Tips for the operating and use

  • The RS232-USB adapter must be set to COM 3
  • The instrument must be set to data transfer rate of 57600 baud
  • The AMPLECTOR Instrument Manager and the instrument driver can only display and edit the data and information from the instrument at the quality which was originally saved
  • The stability and quality of communication between the AMPLECTOR Instrument Manager and the instrument are based on the transmission method of the instrument manufacturer
  • AMPLECTOR Instrument Manager and the instrument driver do not support any server and remote control mode


Synchronics Provides Expert Electronic Repairs For KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector At Synchronics we have the experience in repairing KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector in a timely and cost effective manner. We provide free Quote for KRAUTKRAMMER ,GE USM 35X - DAC LEMO Ultrasonic Flaw Detector sent to us for repair at our works. We provide an OEM level of quality service at a competitive, non-OEM price. We have the ability to repair and calibrate many KRAUTKRAMMER units from many different Manufacturers. With our state-of-the-Art technologies and dedicated technicians, our staff is able to ease the pain of any repair service order.
£805.20
Used GE KrautKramer USM GO Ultrasonic Flaw Detector - Sale !! (USM GO)
GE USM GO Ultrasonic Flaw Detector
The new ultrasonic Go platform from GE’s Inspection Technologies business combines a thickness gauge and a flaw detector in one single lightweight instrument.

Ergonomically Designed with the User in Mind
The USM Go ultrasonic portable flaw detector has been ergonomically designed to provide an instrument that is light, small and easy to use in the harshest of inspection environments

Features:
  • Portability
    • Small size, lightweight, robust, dust- and waterproof construction allow the instrument to be easily operated in confined spaces, areas of difficult access, and in harsh environments.
    • Can be operated with one hand, leaving other hand free for other tasks, such as maintaining probe in optimum position or holding on to ladders.
    • Light enough to be carried throughout a whole day’s shift.
    • Battery provides up to 6 hours operation. Can be recharged on- or off-board.
    • Several accessories to improve mobility are available: wrist strap, shoulder harness, belt holster.
  • Easy-to-Read Screen
    • A display screen that is the same size as those in other GE flaw detectors, even though the instrument is much smaller than other instruments in the range
    • An 800 x 480 pixel display, which is better resolution than a standard DVD.
    • A screen with an optimized aspect ratio to ensure highly defined echo separation.
    • A screen that can be easily viewed, whether hand-held or desk-mounted.
    • A screen that has been ergonomically sized to help reduce eyestrain.
    • An integrated stand allows the user to optimize the viewing angle, when the instrument is desk- or benchmounted
    • AutoGate Threshold for faster measurement with optimum accuracy.
    • A-scan freeze mode function (for gate A and B) fascilitates working in difficult ergonomic conditions.
    • Display measurement indicators show both amplitude and distance to reduce risk of error
  • Ease of Use
    • Pressure-sensitive joystick imported and adapted from the successful range of remote visual inspection and ultrasonic equipment offered by GE.
    • All controls within fingertip reach. User can dedicate function keys according to preference
    • A “Flip” function allows the instrument to be used equally well by left-handed and right-handed people.
    • A standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage.
    • The instrument’s 2 GB memory can be easily exchanged by SD cards up to 16 GB
    • Reports are produced in jpeg format so there is no need for special reading software.
    • Printable summary list of all parameters
    • Easy directory management on SD cards
    • Built-in menu customization tool allows to adapt the menu structure to two levels of users.
    • Smart notes function increases reporting efficiency.
    • Yearly calibration reminder for efficient quality management

Increasing Productivity
The USM Go features intuitive operation so there is virtually no time-consuming, learning curve.

You are productive from the moment you pick it up!

There is no need to refer to the manual, as clear instructions are provided as you go along. Navigation is simplified using the proven graphical user interface (GUI) and the innovative joystick, allowing one-handed operation for fast and accurate adjustment.

Other features allowing increased productivity are:
  • A robust molded rubber casing to withstand the harshest environments and significantly reduce downtime. The instrument is dust- and waterproof to IP67 and is tested to withstand shock and vibration
  • A simple on-board data logger to collect and save thickness measurements or eventually attach the corresponding A-scan image.
  • Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability.
  • Automatic Gate Threshold for the 2 gates ensuring accurate measurements made under the same conditions
  • Video recording upto 8 minutes allows live reporting.
High UT Performance
  • State-of-the-art electronics, including digital amplification, for a wide range of application benefits.
  • A wide Pulse Repetition Frequency range allows use at low PRF to inspect forged parts without any “ghost” echoes and to inspect welds at high PRF when fast and regular scanning movement is required.
  • Precise Time of Flight indication in µs.
  • TrueDGS compatible.
Versatile and Upgradeable
  • Customized versions of the USM Go are also available, specially adapted to meet specific inspection codes or applications. For example, an optional square wave pulser can be supplied for applications involving the inspection of highly attenuative material. The versions shown in the table are currently available. For more detailed information, please contact your local GE representative or visit www.ge-mcs.com.

A Wide Range of Applications
The USM Go has been designed to provide flaw detection capability in inspection situations throughout the industrial and process spectrum, from aerospace to power generation and from the automotive sector to the oil and gas industry.

These include:

Weld Inspection:
  • Trigonometric projections
  • AWS
  • DAC
  • DGS
Inspection of Forgings and Castings:
  • Manual PRF adjustment
  • Phantom echo indicator
  • DGSS
  • Backwall Echo Attenuator (BEA)
Inspection of rails:
  • High PRF (up to 2000 Hz)
  • Lightweight: 850 g (1.87 lb)
  • Small size and ergonomics
Inspection of Composites:
  • RF Display
  • 2 gates with B-start triggered with echo in gate A
  • TCG correction with high slope 120 dB/µs
  • Reflector depth indicated in layer
For more demanding applications:
  • Narrow band filters
  • Low noise digital amplifier
  • TCG correction with high slope 120 dB/µs
  • Backwall Echo Attenuator (BEA)
Specifications:
LCD Display
Active AreaW x H: 108 mm x 64.8 mm (4.25” x 2.55”)
Screen Diagonal5.0”
Pixel ResolutionW x H: 800 x 480 pixels
Connectors
Probe ConnectorsTwo LEMO-00
UT Output ConnectorSAP output, alarm
USB InterfaceMicro USB connector
SD Card ConnectorFull size SD card slot to accommodate standard SD cards
Pulser - All pulser measurements taken according to EN12668 specifications
Pulser ModeSimulated spike standard, uni-polar square wave optional
Pulser Voltage (SQ Mode)120 V to 300 V with 10 V steps
Pulser Width (SQ Mode)30 ns to 500 ns with 20 ns steps
Pulser Amplitude (Spike Mode)Low : 120 V
High: 300 V
Damping50 or 1000 Ohms
PRFAutomatically optimized between 15 Hz to 2000 Hz, 3 automatic adjustment modes : AutoLow, AutoMed, AutoHigh - Manual Control of PRF from 15 to 2000 Hz
Receiver
Range14016 mm at steel longitudinal wave (557”)
Digital GainDynamic range of 110 dB, with 0.2 dB step
Analog Bandwidth0.2 MHz - 20 MHz
FiltersBroad band
Narrow band filters 1; 2; 2.25; 4.5; 10; 13; 15 MHz
Gate
Independent Gates2 Gates (A and B), Gate B can support triggering by Gate A
RectificationFull Wave (FW) Positive (POS)
RF Negative (NEG)
MeasurementPeak, Flank, JFlank
Measurement unitsTOF in, mm, µs
Amplitude % dB
Memory
Capacity2 GB SD card. Up to 16 GB memory cards can be used
ReportJpeg and BMP reports
Data LoggerOption for thickness or A-scan recording, compatible with UltraMATE
Environmental
Battery6 hours battery life
On board charging
Off board charging with optional adaptor
Proportional battery gauge indicating remaining operation time
Automatic energy server mode (Auto Off) allows saving battery life by putting the instrument in sleep mode automatically when not in use
Charger“Universal” AC (100-240 V, 50-60 Hz)
Meets CCC, CE, UL, CSA and PSE requirements
Size175 mm x 111 mm x 50 mm (6.8” x 4.3” x 1.9”)
Weight845 g (1.87 lb) with the battery
LanguagesBulgarian, Chinese, Czech, Dutch, English, French, German, Hungarian, Italian, Japanese, Portuguese, Polish, Russian and Spanish
Protection as per Mil-Std-810F
Damp Heat and Humidity (Storage)10 cycles: 10 hrs at 60°C (140°F) down to 30°C (86°F), 10 hrs at 30°C (86°F) up to 60°C (140°F), transition within 2 hrs, 507.4
Temperature Shock (Storage)3 cycles: 4 hrs at –20°C (-4°F) up to 60°C (140°F), 4 hrs at 60°C (140°F), transitions within 5 minutes, 503.4 Procedure II
Vibration514.5-5 Procedure I, annex C, figure 6, general exposure: 1 hr each axis
Shock6 cycles each axis, 15 g, 11 ms half sine, 516.5 Procedure I
Loose Cargo (In Shipping Container)514.5 Procedure II
Transit Drop (Packaged for Shipment)516.5 Procedure IV, 26 drops
Operating Temperature Range0°C to 55°C (32 to 131°F)
Storage Temperature Range-20°C to 60°C (-4 to 140 °F) with battery, 24 hrs
Dustproof / WaterproofAs per IEC 529 specification for IP67 classification
ComplianceEMC/EMI
EN 55011 EN61000-6-2:2001
Ultrasound
EN 12668 ASTM E1324 E317 ANSI/NCSL Z 540-1-1994 MIl STD 45662A MIL STD 2154


INCLUDE : 

GE USM GO Ultrasonic Flaw Detector (BC# 38137-L/T*)
AC Adapter/Charger
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Carrying Case (G)
The GE USM Go portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
£1,745.26
Used GE KrautKramer USN58L Ultrasonic Flaw Detector - Sale !! (USN58L)
USN 58L makes up for the lead in display speed that analog instruments previously had.

Proven performance features

of the successful Krautkramer instruments USN 50/52 were adopted or further improved:

Calibration range from 1 mm to 12 m for minimum and maximum sized workpieces
Large frequency range from 0.25 to 25 MHz for optimum probe matching
Pulse repetition frequency from 15 to 2000 Hz, automatically linked with the calibration range or manually adjustable
2-point calibration: easy, fast, and very accurate
Material tables with 65 sound velocities stored in the instrument
 

Even for demanding applications

Besides the powerful ultrasonic features, the USN 58L has other specialities available to extend its application range:

Real-time outputs: analog and TTL outputs for the requirements of automatic test systems
"SmartView" function: maximum flaw detectability even at high scanning speeds
Reliable display of even shorter signals (e.g. from only one transmit/ receive cycle) by adjustable persistence.
Easy operation, thanks to the two rotary knobs, is combined with an intuitive menu layout.

GE KrautKramer USN58L Ultrasonic Flaw Detector Thickness Gauge

Installed Options:
- SQPLS
- VGA Output

USN 58L features the transflective (i.e. contrast by external light) color LCD screen that even with direct sunlight, the display is still easily readable - an advantage that every operator will appreciate in field applications.

INCLUDED :

Krautkramer USN58L Ultrasonic Flaw Detector w/ Options: (BC# 38869-L/T*)
SQPLS
VGA Output Option (USN 58L Only)
(2) BNC Cables
Alkaline Battery Pack
User Manual On CD-ROM

Also you can check : Used General Electric Mentor UT Phased Array Flaw Detector - Sale !!

Presented by the universal ultrasonic instrument USN 58L: the transflective (i.e. contrast by external light) color LCD is the optimum choice for use in a bright environment. Even with direct sunlight, the display is still easily readable - an advantage that every operator will appreciate in field applications.
£1,261.35
Used GE KrautKramer USN58R Ultrasonic Flaw Detector - Sale !! (USN58R)

Krautkramer USN 58R
The ultrasonic instrument for the workshop, even for automated inspections.

 

High-contrast, crystal clear

Optimum readability from any viewing angle, all this is provided by the EL display of the USN 58R. This display technology does not only make this ultrasonic instrument the best choice for shop use but also for outdoor applications at very low temperatures: the USN 58R loves the cold and operates even at -20 °C / -4 °F without any problem.

It goes without saying that the display can be further optimized depending on the application site: you can set the brightness low or high, or you can choose the inverted display mode for fatigueproof work. Thanks to the electronic parallax-free grid, you will see every detail even at an unfavorable viewing angle and from a greater distance.

 

Automatic, multi-channel

Requirements that the USN 58R is also able to meet: the instrument is qualified for automated applications by its two monitor gates provided with configurable real-time outputs - in combination with the "SmartView" feature which ensures maximum flaw detectability, especially at high scanning speeds.

Multi-channel test systems can be quite easily set up by synchronizing several instruments and, provided with the Interface Echo option, these systems are also suitable for an immersion test. This makes the USN 58R an economic solution in this extended field of application for portable ultrasonic instruments.

 

Universal, flexible

The attributes characterizing the USN 58R thanks to its other options: the Backwall Echo Attenuation feature, specifically including the backwall echo in the flaw evaluation by reducing the gain, makes the USN 58R a good choice, especially for the inspection of castings and forgings.

Another focal area of application is the weld inspection - of course with amplitude evaluation and precise flaw location on flat and curved components - or with the additional options DAC/TCG or DGS for ultrasonic testing according to the majority of national or international standard specifications.

Included : 

GE USN58R Ultrasonic Flaw Detector (BC# -L/T*)
BNC To BNC Cable
User Manual On CD-ROM
Carrying Case (G)



Optimum readability from any viewing angle, all this is provided by the EL display of the USN 58R. This display technology does not only make this ultrasonic instrument the best choice for shop use but also for outdoor applications at very low temperatures: the USN 58R loves the cold and operates even at -20 °C / -4 °F without any problem.
£1,118.55
Used GE Inspection Technologies USN 60 Flaw Detector - Sale !! (USN 60)
GE Inspection USN 60 Ultrasonic Flaw Detector
GE Inspection Technologies has optimized its USN 60 series for use in direct sunlight and operation at extreme temperatures. These new characteristics make the instruments ideally suited for outdoor use with its increased long battery operation time.

The combination of the rugged USN durability, 11 hours of battery operation, fast rotary knob operation, outstanding ultrasonic performance, and the モsquare wave pulserヤ form a powerful portable ultrasonic inspection tool.

Optimized outdoor use design
  • Extreme temperature use (-20°C to 55°C /-4°F to 130°F)
  • Easy to view in direct sunlight
  • 11 hours battery operation
Vibrant colors
  • Hi-resolution color LCD display produces モAnalog Look and Performanceヤ echo dynamics.
  • 4 selectable vibrant display color schemes to match lighting conditions.
  • Gates and gate functions are color coded for easy identification and fast adjustment.

User Preferred Features
  • Simple operation with fast rotary knob adjustments; gain is always directly accessible with the left-hand rotary knob and lockable.
  • Auto CAL makes calibration fast & easy.
  • 15 Hz to 6 kHz (spike mode) PRF and 15 Hz to 2 kHz (square mode) PRF (pulse repetition frequency)
  • 2 independent gates monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications.
  • 250 KHz to 25 MHz frequency range.
  • RF display mode enhances signal evaluation and bond inspection of dissimilar materials.
  • 4 selectable damping settings (50, 75, 150, 500 ohms) for optimum probe performance.
  • 1 mm to 28 m (0.040ヤ to 1100ヤ) range (in steel) covers thin to lengthy acoustically clean materials.
  • dB REF key evaluates subsequent echoes gain value and amplitude against the highest echo in Gate A (reference echo) when activated.
  • IF (Interface) Gate Option for automatic start of the display, Gate A, Gate B, and / or DAC / TCG for immersion testing applications.
  • VGA Output Option provides an easy way to connect to a PC monitor or PC projector for viewing by large audiences or training purposes.
  • RF Output Option outputs the raw RF waveform via a standard Lemo connector for further analysis.
  • BEA (Backwall Echo Attenuator) Option allows independent gain control of the region under Gate B for backwall echo monitoring.
  • 19ヤ Rack Mount Model.

Wide range of applications

A 6 kHz pulse repetition frequency, real-time analog and TTL outputs makes the USN 60 flaw detectors series ideal for a wide range of automated systems testing applications. The exclusive SmartView feature displays even the shortest echoes for critical scanning and rotating part inspections.

The quality, durability, dependability and ease of use that you have come to expect of Krautkramerメs popular USN Series of instruments remains. From rugged field inspections to high resolution thin measurements, long acoustically clean materials, and immersion systems, the USN 60 flaw detector family extends the range of applications that a portable instrument can perform. Furthermore the selectable 450V Square Wave Pulser satisfies a wide range of tough-to-penetrate applications, such as difficult to penetrate metallic  applications and especially non-metals inspection like composite materials.

Tools for easy weld inspection
  • Color Leg allows easy identification of leg and skip distances for weld inspection
    • GRID mode dynamically changes bands of display backgroundcolors for each leg.
    • A-SCAN mode dynamically changes the color for each leg of the モliveヤ A-Scan
  • Weld Rating Calculation simplifies the rating of weld indications according to AWS Specification D1.1. (Formula D = A ヨ B ヨ C).
  • Trigonometric flaw location function with curvature correction automatically calculates depth, surface distance, and sound path to flaw along with the leg of the inspection when using angle beam probes. All TOF measurements can be displayed in mm, inches or µs.
  • SmartView function along with variable persistence freeze modes displays the most important information (relevant shot) for a test.
  • Real time (single shot) analog and TTL outputs handle a wide range of automated systems applications.
  • Choose from Four Freeze Modes: ALL, Peak Std, Compare or Envelope for optimum waveform evaluation and comparison.
  • Three Variable Persistence Modes are selectable in Freeze Envelope to visually assist flaw detection & evaluation for scanning and moving part inspections.
  • Compare frozen reference wave-forms to live A-Scans in different colors to easily interpret test results.

Documentation and recording
  • Store & preview a minimum of 200 user-named data sets with A-Scans for quick recall and instrument setup.
  • UltraDOC 4 software program for bi-directional communication with a PC for easy storage of data sets with A-scan and documentation of test results.
  • UltraMATEル software program simplifies the transfer, storage, analysis, and documentation of thickness data.
  • Reports with A-Scans are output directly to a variety of printers.

Specifications:
Range USN 600.040ヤ to 1100ヤ (1 mm to 28 m) at steel velocity; range selectable in fixed steps or continuously variable
Material VelocityContinuously adjustable from 0.0098 to 0.6299 inches/µs (250 to 16,000 m/s); 65 selectable material velocities
Display Delay-20 to 3498 µs in steel (dependent on range)
Probe Delay/Zero Offset0 to 999.9 µs
Damping50, 75, 150, 500 ohms
Gain0 to 110 dB adjustable in selectable steps 0.1, 0.5, 1.0, 2.0, 6.0, user definable, and locked
Test ModesPulse echo, dual, and thru-transmission
PulserSquare wave excitation pulse
Pulse Voltage (Square wave pulser mode)50 to 450 V scrollable in 10 V adjustments
Pulse Width (Square wave pulser mode)Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode)Low, High
Pulse Repetition Frequency USN 60Autolow, autohigh, manually adjustable from 15 to 6000 Hz (spike mode) and 15 to 2000 Hz in square wave mode, in 5 Hz increments, external trigger (spike mode only)
Bandwidth (amplifier bandpass)0.25 to 25 MHz with 10 selectable settings including broadband
Gate MonitorsTwo independent flaw gates controllable over entire sweep range
Measurement ModesZero-to-first, multi-echo with selectable flank or peak detection
RectificationPositive halfwave, negative halfwave, fullwave, RF
Reject (suppression)0 to 80% linear
UnitsInch, millimeter, or microsecond selectable
Operating Temperature-20° to 55°C (-4° to 130°F);
-25° to 70ºC (-13° to 158 º F ) storable
LanguagesSelectable English, German, French, Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish, Danish, Dutch, Russian, Czech, Romanian, Slovakian
Probe ConnectorsBNC or Lemo
KeypadInternational symbols
Battery PowerLithium Ion battery pack; NiMH, NiCad or alkaline cells substitutable
Battery Life11 hours on Li-Ion battery pack
Size11.1ヤ W x 6.75ヤ H x 6.25ヤ D (282 x 171 x 159 mm)
Display640 x 480 pixels Color LCD 132.48 x 99.36 mm
Weight6.6 lbs. (3.0 kg) Li-Ion battery;
3.5 lbs.(1.6 kg) without battery
Color LegEasy identification of leg and skip distances for angle beam inspection in A-scan or grid background colors
Weld Rating CalculationSimplifies the rating of weld indications according to AWS specification D1.1, (formula D=A-B-C)
Dust Proof/DrippingWater ProofAs per IEC 529 specification for IP54 classification
ComplianceEMC/EMI: EN 55011:2007, EN 61000-6-2:2005 Ultrasound: EN 12668, ASTM E317


What's In The Box:

(1) Lithium-ion battery pack, 12 Ah, in battery lid
(1) Power supply/charger unit
(1) Protective screen foil
(1) Operating manual
(1) CD-ROM with application for firmware upgrade download
(1) Manufacturer’s certificate
The The GE Inspection Technologies USN 60 flaw detector is designed for outdoor use with two independent gates to monitor amplitude and soundpath distance for both flaw detection and thickness measurement applications. It features pulse echo, dual, and thru-transmission test modes as well as measurement modes for zero-to-first and multi-echo with selectable flank or peak detection. This flaw detector also calculates weld ratings according to AWS specification D1.1 (formula D=A-B-C).
£1,420.01
Used GE Inspection Technologies Autosigma 3000 Conductivity Meter - Sale !! (Autosigma 3000)

The AutoSigma 3000 gives accurate operation in an easy to use package that is both light and rugged. Designed for operator convenience, the lightweight, battery powered unit is easy to carry and easy to hold during inspections. The 500kHz frequency allows inspection of thin materials using the standard probe. The 60kHz setting is the aerospace industry standard.

APPLICATIONS

  • Identification and separating of non-ferrous (typically aluminum alloys) components
  • Validation of in-service heat damage
  • Verification of heat treatment
  • Measurement of the density of powder metal parts
Features : 

  • High accuracy 0.8 to 110% IACS (0.45-64 MS/m) conductivity measurement /- 0.1 at 10% IACS
  • Light weight at only 0.4kg
  • Temperature compensation (0 to 40-deg C)
  • Selectable Frequency (60 or 500 kHz)
  • Clear Display with Back Light
  • Data Logging (500 readings in up to 50 files)

Includes :

47P001 Conductivity Probe (60 and 500kHz)
Straight Probe with 0.50 Inch Tip Diameter
Conductivity Set-up Block
AA Alkaline Batteries (3 ea.)
Probe Lead (60 inch)
Probe Shoe for Radiused Surface
Plastic Carrying Case
Carrying Bag with Shoulder Strap
Operating Manual
Certificate of Conformity
The AutoSigma 3000 gives accurate operation in an easy to use package that is both light and rugged. Designed for operator convenience, the lightweight, battery powered unit is easy to carry and easy to hold during inspections. The 500kHz frequency allows inspection of thin materials using the standard probe. The 60kHz setting is the aerospace industry standard.
£990.83
Per Page      1 - 11 of 11
  • 1