GSSI

Sort By:  
Flex NX, powered by Nexus is the industry’s most powerful and efficient concrete scanner. The all-in-one design offers a large and integrated touchscreen display, providing intuitive interface with minimal navigation.
$5,350.00
The PaveScan RDM 2.0 is our second-generation asphalt density assessment tool that is ideal for uncovering inconsistencies that occur during the paving process, including poor uniformity and significant variations in density. By detecting these problems, PaveScan RDM 2.0 helps to avoid premature failures such as road raveling, cracking and deterioration along joints.
$5,600.00
GSSI StructureScan Mini LT, Entry Level GPR System for Concrete Inspection is an entry Level GPR System for Concrete Inspection. All-in-one GPR system for concrete inspection.
$3,225.00
The StructureScan™ Mini XT is the tool built to handle all your job site and survey needs. This rugged system is designed with an integrated display for single operator data collection and interpretation. Reduce safety risks, financial exposure, costly delays and provide the full-range of services to your customers by adding this concrete scanner to your toolbox.
$4,425.00
The 900 MHz antenna is designed for applications requiring shallow penetration down to 1 m (3 ft), including void detection, concrete thickness assessment and shallow pipe location.
$815.00
The MALÅ CX-12 System offers three project measurement modes – 2D, 3D Grid, and Object Mapper. Each mode allows system operators to scan concrete structures safely and in real-time. This leads to more timely inspections, safer operating environments, as well as a more cost-effective option compared to other competing systems or traditional radiographic methods.
$2,250.00
The Geophysical Survey Systems (GSSI) StructureScan Mini HR 2D/3D Ground Penetrating Radar is the ideal equipment for the concrete inspection industry. It has an all-in-one GPR system for locating rebar, conduits, post-tension cables or voids, and used to determine concrete slab thickness in real-time. This model StructureScan Mini HR 3D can be run in 2D for real-time target location or 3D, for an x-ray like image. Ideal for complex areas, the StructureScan Mini HR can delineate small targets with superior vertical and horizontal resolution.
$2,300.00
GSSI SIR 4000 is GSSI first high-performance GPR data acquisition system designed to operate with analog and digital antennas. This evolutionary step allows for true versatility and flexibility by supporting a wide range of users across numerous applications.
$2,115.00
The 2600 MHz antenna is an ultra-high resolution antenna used to inspect concrete structures and to locate embedded rebar, post tension cables and conduits. This antenna is compatible with the SIR 4000 and SIR 30 control units.
$1,425.00
StructureScan Pro is a versatile concrete inspection system offering a wide variety of antenna options for concrete and other applications. Based on the SIR 4000 controller, the StructureScan Pro provides the GPR professional with solutions to any scanning situation.
$4,115.00
The StructureScan Mini LXT is designed and built for the concrete contractor who needs to locate and mark targets. This rugged, handheld system is ideal for locating the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, voids and service utilities. The Mini LXT helps to reduce safety risks, financial exposure, and costly delays in concrete renovations.
$3,150.00
With UtilityScan Pro, users can quickly identify and mark the position and depth of metallic and non-metallic objects; including utilities such as gas, communications and sewer lines as well as underground storage tanks and PVC pipes. Based on the SIR 4000 controller, the UtilityScan Pro provides the GPR professional with solutions to any underground locating situation.
$6,300.00
The 1600 MHz antenna is a high-resolution, all-purpose antenna suitable for the inspection of concrete structures to locate/map rebar, post-tensioned tendons and conduits. It is typically used for general investigation works including floor slabs, walls, bridge decks and shallow void detection.
$1,050.00
The Palm Antenna offers users the ability to reach tightly spaced areas that were previously inaccessible such as corners, against walls and around obstructions. The antenna includes a dedicated survey wheel, a replaceable skid plate, and removable handle to reduce antenna height, if necessary. The Palm Antenna is compatible with the SIR 4000 and SIR 30 control units.
$1,175.00
This 2300 MHz Palm XT antenna offers superior depth penetration and resolution. It features a full keypad control via the antenna top that provides remote control of the user interface.
$1,225.00
New GSSI Flex NX Concrete Scanning System - Sale !! (Flex NX)

The Most Complete Concrete Scanning System

Flex NX, powered by Nexus is the industry’s most powerful and efficient concrete scanner. The all-in-one design offers a large and integrated touchscreen display, providing intuitive interface with minimal navigation.

New data collection modes harness the power of simultaneous standard and cross-polarized antennas, Flex Mode for quick prospecting, and live viewing on a paired phone or tablet. Use Flex NX™ on its own, or pair an NX wireless satellite antenna for a flexible solution to any concrete scanning problem. When you’re done, simply upload your results to GSSI Fusion and quickly create an informative and great-looking report.

  • DISPLAY:

    17.8 cm (7 in)
    High Resolution Touchscreen

  • MAX DEPTH:

    Flex NX and NX25: 0-75 cm (0-30 in)
    NX15: 0-100 cm (0-40 in)*

  • ENVIRONMENTAL:

    IP65
    -20°C to 50°C (-4°F to 122°F)

  • PRODUCT SUPPORT:

    Comprehensive training
    2-year warranty


    CONCRETE SCANNING MADE EASY

    Wireless Made Easy
    Flex NX™ allows for effortless pairing of wireless NX accessory antennas using Tap-to-Connect technology as well as wireless data transfer and software updates.

    Get the Full Picture
    Flex NX™ gives you the full picture by introducing a one-pass cross polarization design that enables you to quickly and easily locate and identify targets.

    Make the Complex Simple
    Use Flex NX’s innovative Flex Positioning system to quickly identify areas of interest in real-time without the need for complicated setups or grids.

    Deliver Results
    Accurately mark your findings on the ground, then easily create and send interactive reports before you leave the jobsite.

    DON'T SETTLE FOR INCOMPLETE SOLUTIONS

    Tackle Any Job
    The flexibility of your Flex NX™ and NX wireless antennas allows you to succeed no matter what the jobsite throws at you.

    The Versatility You Need
    View results directly on your Flex NX™ or quickly connect any phone or tablet for different display options when the situation requires it.

    Choose Your Setup
    The Flex NX™ and NX antennas are designed with a universal mount to help reduce fatigue and provide better ergonomics. Switch between the handle, extension pole or off the shelf mounting accessories.

    Complex Problems, Many Solutions
    Data needs to be easy to collect and view. Flex NX provides multiple data collection and visualization modes, including LineScan, Focus Mode, and the new, innovative Flex Mode. Now you have the flexibility you need to deliver trusted results.

    YOUR TRUSTED PARTNER

    You trust GSSI, the equipment we make and the results that you get from your system. In return, your customer trusts you.

    Every product we offer, including Flex NX™, is built and tested with your jobsite environment in mind. Extreme heat, cold, dust and water are no match for your Flex NX™ system.

    Jobsite Proven

    • Rated IP65
    • -20°C to 50°C (-4°F to 122°F)
    • High capacity Lithium-ion batteries


    System Includes :
    • Flex NX with adjustable handle
    • Lithium-ion battery (2)
    • US & Canada: Dual-bay battery charger
    • International: Dual-bay battery charger with AC adapter and four (4) international plugs
    • Rugged transit case
    • Safety wrist strap
    • Quick start documentation
    • 2-year warranty


    Specifications
    OPERATIONAL MODESSingle, dual or merged channel LineScan, Focus Mode, Flex Mode
    STORAGE200 GB
    OPERATING TEMPERATURE-20°C to 50°C (-4°F to 122°F)
    IP RATINGIP65
    POWERLithium-ion battery
    DIMENSIONS25.3 x 13.2 x 18.9 cm (9.9 x 5.2 x 7.4 in)
    WEIGHT2.2 kg (4.9 lbs) including battery 2.4 kg (5.3 lbs) including battery and handle



Flex NX, powered by Nexus is the industry’s most powerful and efficient concrete scanner. The all-in-one design offers a large and integrated touchscreen display, providing intuitive interface with minimal navigation.
$5,350.00
Used GSSI PaveScan RDM 2.0 - Non-destructive Asphalt Density Testing - Sale !! (PaveScan RDM 2.0)
The PaveScan RDM 2.0 is our second-generation asphalt density assessment tool that is ideal for uncovering inconsistencies that occur during the paving process, including poor uniformity and significant variations in density. By detecting these problems, PaveScan RDM 2.0 helps to avoid premature failures such as road raveling, cracking and deterioration along joints.

  • MAX DEPTH

    Surface Only

  • SENSOR FREQUENCY

    2 GHz

  • WEIGHT

    36.9-42.9 kg (81.4-94.6 lbs)

  • STORAGE CAPACITY

    256 GB

  • DATA DISPLAY MODES

    Line Graph, Data Contour Map or Histogram Distribution

  • ACCESSORIES

    Upgrade kit from 1 to 3 sensors, Geode GPS


    INCLUDES :

    2 GHz Sensor (1 or 3)
    Panasonic Toughpad G1
    4-wheel cart
    2.1 m digital control cable(s)
    Concentrator box
    Lithium-ion battery (2)
    Dual-bay battery charger
    User Manual
    1-year warranty

The PaveScan RDM 2.0 is our second-generation asphalt density assessment tool that is ideal for uncovering inconsistencies that occur during the paving process, including poor uniformity and significant variations in density. By detecting these problems, PaveScan RDM 2.0 helps to avoid premature failures such as road raveling, cracking and deterioration along joints.
$5,600.00
Used GSSI StructureScan Mini LT GPR - Sale !! (StructureScan Mini LT)

GSSI StructureScan Mini LT, Entry Level GPR System for Concrete Inspection is an entry Level GPR System for Concrete Inspection. All-in-one GPR system for concrete inspection.

This handheld system locates rebar, conduits, post-tension cables, voids and can be used to determine concrete slab thickness in real-time. Typically used to:

  • Locate metallic and non-metallic targets in walls
  • Inspect bridges, monuments, walls, towers, tunnels, balconies, garages, decks
  • Map relative concrete condition for rehab planning
  • Measure slab thickness
  • Void location


GSSI StructureScan Mini LT Technical Specifications

Memory Based on SD card size, default is 2 GB
Display 5.7”, full-color
Post-processing On-screen or via GSSI software (optional)
Battery 2.5 hour run-time
Available Ports SD card, USB port
Environmental Water-resistant and dust proof (IP-65 rating)
Languages English, Spanish, French, German, Korean and Japanese
Weight 1.6 kg (3.6 lbs)

Includes;

  • StructureScan Mini LT
  • Lithium-ion batteries (2)
  • Dual-bay battery charger
  • Hand strap
  • Transit case
  • Quick Start Guide
  • Data collection grids
  • 2-year warranty
  • RADAN 7 Software License

GSSI StructureScan Mini LT, Entry Level GPR System for Concrete Inspection is an entry Level GPR System for Concrete Inspection. All-in-one GPR system for concrete inspection.
$3,225.00
New GSSI StructureScan Mini XT GPR - Sale !! (StructureScan Mini XT)
StructureScan Mini XT

Tool Designed for Today's Professional Concrete Scanner
The StructureScan Mini XT is the tool built to handle all your job site and survey needs. This rugged system is designed with an integrated display for single operator data collection and interpretation. Reduce safety risks, financial exposure, costly delays and provide the full-range of services to your customers by adding this concrete scanner to your toolbox.

The Mini XT is ideal for concrete inspection and evaluation. Easily and accurately locate the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, pan decking, voids and service utilities.

  • MAX DEPTH

    60 cm (24 in)

  • ANTENNA FREQUENCY

    2700 MHz

  • WEIGHT

    1.8 kg (4 lbs)

  • STORAGE CAPACITY

    14.5 GB

  • OPTIONAL SOFTWARE
    RADAN 7 for StructureScan Mini

    ACCESSORIES

    Palm XT, LineTrac XT, Carry Harness, Accessory pole



The StructureScan Mini XT is typically used to:
  • Find rebar, post tension, conduits, and non-metallic objects
  • Measure slab thickness and void location
  • Concrete scanning and imaging
  • Condition assessment
  • Structure inspection


The Professional Scanner's Choice
The StructureScan Mini XT is the right tool to conquer all your job site needs.
  • High Frequency, High Resolution Concrete Antenna

    The StructureScan Mini XT employs a 2.7 GHz antenna that provides excellent near surface resolution while also maintaining the ability to resolve deeper targets.

  • Enhanced Target Visualization

    The StructureScan Mini XT provides multiple modes for data collection and interpretation:

    Scan EZ: With the press of just one button, this mode provides the ideal amount of information with 2D data views for efficient mark-and-go surveys
    Scan Max: Focus mode is designed to simplify the data to better highlight embedments, locate voids and see closely spaced targets
    Scan 3D: 3D visualization is often used in complicated structural scenarios where the survey area may contain multiple levels of targets. This mode helps the user visualize congested areas and non-linear targets

  • StructureScan Mini XT Kit

    Increase Job Site Efficiency with Mini XT Kit

    Today’s professional scanners need a variety of tools to conquer all job site obstacles. For large survey areas the extension pole allows for better ergonomics and ease of use. Using the Mini XT harness and Palm XT antenna together allows the user to collect data with one-hand operation ensuring you maintain 3 points of contact to comply with OSHA regulations.


    Specifications
    DISPLAY6.5” Touchscreen LED
    ENVIRONMENTAL RATINGIP65
    DISPLAY MODESLinescan, Focus and 3D
    AVAILABLE PORTSUSB
    LANGUAGESEnglish, French, Japanese and Chinese
    OPERATING TEMPERATURE-4°F to 104°F (-20°C to 40°C)


    INCLUDES : 

    • StructureScan™ Mini XT with 3D software
    • Lithium-ion battery (2)
    • Dual bay battery charger
    • Rugged transit case
    • Quick Start Guide
    • 2-year warranty


The StructureScan™ Mini XT is the tool built to handle all your job site and survey needs. This rugged system is designed with an integrated display for single operator data collection and interpretation. Reduce safety risks, financial exposure, costly delays and provide the full-range of services to your customers by adding this concrete scanner to your toolbox.
$4,425.00
New GSSI 900 MHz – Shielded Antenna - Sale !! (900 MHz – Shielded Antenna)
The 900 MHz antenna is designed for applications requiring shallow penetration down to 1 m (3 ft), including void detection, concrete thickness assessment and shallow pipe location.
$815.00
Used Mala CX12 Concrete Scanner - Sale !! (CX12 Concrete Scanner)

he MALÅ CX Concrete Imaging System is an easy to use, Ground Penetrating Radar (GPR) system designed for the non-destructive investigation and imaging of concrete and other structure. Construction professionals involved in the cutting, coring or drilling of concrete structure require a safe and reliable means of inspecting work areas to locate and identify hidden features that could cause damage to machinery, or pose a danger to the operator or the structure itself during these activities.

The MALÅ CX system allows you to scan concrete structure simply and safely in three different measurement modes; 2D-, 3D Grid- and Object Mapper- projects and present data clearly for real-time and in-the-box data acquisition, display and analysis. It is a quicker, safer and more cost effective option than competing systems or traditional radiographic testing methods. With its simple user interface and large number of software features, the MALÅ CX System offers a unique powerful choice for your high frequency GPR investigations.

APPLICATIONS:
The MALÅ CX system is the tool of choice for those who need to quickly and easily investigate areas prior to cutting, coring or drilling. Other applications include:
> Concrete / Structure inspection
> Measure depth of cover or slab thickness
> Measure layer thickness
> Locate and map reinforcing support structure
> Locate non-metallic features, i.e. heating / water pipes
> Quality assessment & control
> Void detection

FEATURES:
The product’s simple yet ergonomic and field rugged design, intuitive user interface and clear display is testament to its success and it remains as the number one choice in its field.
> Minimal set-up for fast start-up
> LINUX operating system for fast and reliable processing
> Intuitive project driven GUI for enhanced work flow
> Stand-alone Windows processing software
> Project modes for 2D, 3D Grid and Obejct Mapper
> In-the-box processing to clear jobs on site
> Supports EM (50/60Hz) functionality
> Hyperbola fitting tool for velocity calibrations
> Full remote capabilities with the buttons on the antenna

SYSTEM CONFIGURATION:
The MALÅ CX system comes as standard in a portable field rugged case, but can also be used in conjunction with an optional shoulder harness for greater portability and flexibility of use, depending on the application and user requirements. The MALÅ CX system was the World’s first to combine GPR with the more common Electro-Magnetic (EM) technology by way of a fully integrated 50/60Hz sensor. This combination allows the detection of both metallic and non
metallic objects and features, but also aids in the detection and location of metallic conductors energized with 50/60 Hz energy within the structure under investigation; thereby offering an additional element of safety to the system

TECHNICAL SPECIFICATIONS:
> Power supply: External 12V or Li-Ion 12V/12Ah battery
> Operating time: 6h with battery pack
> Operating temp: -20° to 50°C or 0° to 120 °F
> Environmental: IP65
> Display: 10.4” Color TFT Transmissive LCD
> Dimensions: 56 x 46 x 26 cm / 22” x 18” x 10” (in-the-box)
> Weight: 19.5 kg / 42.9 lbs (in-the-box, including antenna)
> Antennas: The MALÅ CX system fully supports the MALÅ High Frequency (HF) Antenna range allowing the user to choose the best antenna for their given application and obtain unsurpassed accuracy and data clarity.

INCLUDES:
(1X) MALA CX12 with EM Antenna
(1X) MALA 1.6 GHz Shielded Antenna 
(1X) EM with a 4-meter Cable 
(2X) Antenna mini-carts for 1.6 GHz-EM 
(4X) Batteries 
(1X) Monitor battery power bag
(1X) Battery charger
(1X) AC monitor power supply
(1X) Monitor Shoulder Harness
(1X) USB Data Cable and SD Card
(1X) 3D Vision Software for Windows
(1X) Software HASP
(1X) Pelican carrying case



The MALÅ CX-12 System offers three project measurement modes – 2D, 3D Grid, and Object Mapper. Each mode allows system operators to scan concrete structures safely and in real-time. This leads to more timely inspections, safer operating environments, as well as a more cost-effective option compared to other competing systems or traditional radiographic methods.
$2,250.00
Used GSSI StructureScan Mini HR GPR - Sale !! (StructureScan Mini HR)

Used GSSI Structurescan Mini HR 3D GPR for sale, excellent condition ready to working order condition, all Options & 3D Scanning, RADAN 7 software.

Package includes;

  • GSSI StructureScan Mini HR 3D
  • 3D option
  • RADAN 7 Software HASP License
  • Charger, AC Adapter, Batteries
  • SD Card
  • USB Data Cable
  • Training Videos, Quick Start Guide & Manual
  • Rugged transit case

The Geophysical Survey Systems (GSSI) StructureScan Mini HR 2D/3D Ground Penetrating Radar is the ideal equipment for the concrete inspection industry. It has an all-in-one GPR system for locating rebar, conduits, post-tension cables or voids, and used to determine concrete slab thickness in real-time. This model StructureScan Mini HR 3D can be run in 2D for real-time target location or 3D, for an x-ray like image. Ideal for complex areas, the StructureScan Mini HR can delineate small targets with superior vertical and horizontal resolution.

The StructureScan Mini HR offers a 2600 MHz GPR antenna for high-resolution data and can reach depths of up to 40cm (16 inches). This innovative system lets contractors and concrete drilling professionals safely locates metallic and non-metallic targets, with an auto target feature that marks the detection of features of interest. Both the standard and HR systems are available with either standard 2D capabilities, or 3D for an x-ray-like image. The lasers on the side of the unit indicate the exact location of the center of target for accurate marking of targets embedded in the concrete.

Features:

  • Locate ferrous and non-ferrous targets (rebar stainless steel plastic conduit)in real-time
  • User-friendly intuitive navigation
  • Ability to see multiple rebar layers within concrete
  • Automatic dielectric calculation
  • Four wheel drive survey encoder
  • Data is displayed on a high-resolution 5.7 inch color screen
  • Locate and mark targets quickly with backup cursor feature and innovative laser positioning
  • Lightweight and simple to transport all-in-one unit weights about three pounds
  • Transfer data with ease data stored on flash card
  • No periodic calibration necessary
  • Built-in automatic target detection software
  • Left and right hand orientation
  • No site hazards or need to close off work areas as with radiography (X-Ray)
  • Durable components that have been tested to be dust proof and water- resistant

Applications:

  • Concrete inspection - locate metallic and non-metallic targets in walls, floors and ceilings
  • Structure inspection - bridges, monuments, walls, towers, tunnels, balconies, garages, decks
  • Condition assessment - map relative concrete condition for rehab planning
  • Measure slab thickness
  • Void location
The Geophysical Survey Systems (GSSI) StructureScan Mini HR 2D/3D Ground Penetrating Radar is the ideal equipment for the concrete inspection industry. It has an all-in-one GPR system for locating rebar, conduits, post-tension cables or voids, and used to determine concrete slab thickness in real-time. This model StructureScan Mini HR 3D can be run in 2D for real-time target location or 3D, for an x-ray like image. Ideal for complex areas, the StructureScan Mini HR can delineate small targets with superior vertical and horizontal resolution.
$2,300.00
Used GSSI StructureScan Pro SIR 4000 Control Unit - Sale !! (StructureScan Pro SIR 4000)
Description

GSSI SIR 4000 is GSSI first high-performance GPR data acquisition system designed to operate with analog and digital antennas. This evolutionary step allows for true versatility and flexibility by supporting a wide range of users across numerous applications.

INCLUDES:

(1X) GSSI SIR 4000 Control Unit
(1X) All-terrain Forklift
(1X) 2m Antenna Cable
(1X) Robust Transport Case for SIR4000
(2X) Lithium-ion Batteries and Charger
(1X) AC Adapter
(1X) USB Drive
(1X) Operation Manual and GSSI Manual CD
(1X) Universal Mounting Bracket
(1X) Sunshield
(1X) Transit Cas

FEATURES:

Overall system flexibility - compatible with all GSSI antennas (analog and digital)
Simple, user-friendly interactive graphic interface
Internal, 32 GB data storage
Ruggedized, high-resolution 10.4” LED display
Internal GPS data logger
Advanced real-time filters
Up to 800kHz transmit rate (200kHz transmit rate in the USA and Canada)
32-bit output data format
20,000 nanoseconds max time range
Convenient file transfer options
FCC, CE, and RSS-220 compliant

GSSI SIR 4000 is GSSI first high-performance GPR data acquisition system designed to operate with analog and digital antennas. This evolutionary step allows for true versatility and flexibility by supporting a wide range of users across numerous applications.
$2,115.00
New GSSI 2.6 GHz High Resolution Concrete Antenna - Sale !! (2.6 GHz)
The 2600 MHz antenna is an ultra-high resolution antenna used to inspect concrete structures and to locate embedded rebar, post tension cables and conduits. This antenna is compatible with the SIR 4000 and SIR 30 control units.
$1,425.00
New GSSI StructureScan Pro SIR 4000 - Sale !! (StructureScan Pro SIR 4000)
StructureScan Pro

Premier ground penetrating radar system for concrete inspection
StructureScan Pro is a versatile concrete inspection system offering a wide variety of antenna options for concrete and other applications. Based on the SIR 4000 controller, the StructureScan Pro provides the GPR professional with solutions to any scanning situation.

MAX DEPTH
46 cm (18 in)

ANTENNA OPTIONS/ ANTENNA FREQUENCY
1600 MHz, 2600 MHz

WEIGHT
9.07 kg (20 lbs)

STORAGE CAPACITY
32 GB

OPTIONAL SOFTWARE
RADAN 7

ACCESSORIES
Palm Antenna, SIR 4000 stand,
SIR 4000 carry harness

The StructureScan Pro is typically used to:

Scan for rebar, post tension, conduits, and non-metallic objects
Concrete slab scanning
Locate voids
Concrete imaging
Condition assessment
Structural inspection

SYSTEM INCLUDES :

SIR 4000 Control Unit
1600 MHz or 2600 MHz antenna
Model 615 handcart with encoder
7-meter control cable
Lithium-ion battery (2)
Dual-bay battery charger
Rugged transit case
2-year warranty

Accurate, reliable, and safe concrete imaging
The StructureScan Pro system provides a non-destructive means to accurately inspect concrete and concrete structures, measure slab thickness and locate voids.
  • StructureScan Pro - Feature 1

    Locate Targets in Concrete

    The StructureScan Pro locates rebar, post tension cables, PVC and metal conduits, and voids.

  • StructureScan Pro - Feature 2

    Premium Mobility

    The rugged handcart-based system is lightweight and simple to transport. GPR is a safe technology with no site hazards or the need to close off work areas as with radiography (X-Ray).

  • StructureScan Pro - Feature 3

    Fully Customizable System

    The StructureScan Pro comes with two antenna options; 1600 MHz or 2600 MHz. Designed to fit your needs, the StructureScan Pro is adaptable to expand survey capabilities, such as bridge and utility applications, with antenna upgrades.


Specifications
SYSTEMSIR 4000
ANTENNASCompatible with all GSSI antennas
NUMBER OF CHANNELSRecords data from 1 single-frequency antenna or 1 dual-frequency antenna
DATA STORAGE32 GB Flash, 1 GB RAM
DISPLAY10.4” LED
GPSData logged internally
DISPLAY MODESLinescan, Full 3D
ENVIRONMENTAL RATINGIP64
DATA ACQUISITION
DATA FORMATRADAN® (dzt)
OUTPUT DATA FORMAT32-bit
SCAN INTERVALUser-selectable, up to 4000 scans/sec
NUMBER OF SAMPLES PER SCAN256, 512, 1024, 2048, 4096, 8192, 16384
OPERATING MODESContinuous (time) or survey wheel (distance triggered) or point mode
TIME RANGE0-20,000 nanoseconds full scale, user-selectable Gain: manual adjustment from -42 to 126 dB Number of segments in gain curve is user-selectable from 1 to 8
STANDARD REAL-TIME FILTERSInfinite Impulse Response (IIR) - Low and High Pass, vertical and horizontal - Finite Impulse Response (FIR) - Low and High Pass, vertical and horizontal
ADVANCED REAL-TIME FILTERSMigration, Surface Position Tracking, Signal Noise Floor Tracking, Adaptive Background Removal
AUTOMATIC SYSTEM SETUPSStorage of an unlimited number of system setup files for different survey conditions and/or antenna deployment configurations
AUTOMATIC ANTENNA RECOGNITIONAutomatic recognition of Smart Antennas to allow maximum compliant transmit rate
LANGUAGESEnglish, Chinese, Japanese and French
OPERATING
OPERATING TEMPERATURE-20°C to 40°C (-4°F to 104°F)
BATTERYInspired Energy Ni2040ED, 3 hour runtime (battery life dependent on level of display brightness)
TRANSMIT RATEUp to 800 KHz (International) US/Canada and CE rates depend on antenna model
INPUT/OUTPUT
AVAILABLE PORTSAnalog and Digital, RS232, HDMI, Ethernet to PC, USB 2.0 port and mini USB
ETHERNETRJ45 100BT Ethernet
USB HOSTUSB host with external keyboard support, USB flash drive support and USB HUB support
MECHANICAL
DIMENSIONS14x10x2.75 in (36x25x7 cm)
WEIGHT10 lbs (4.53 kg) including battery
RELATIVE HUMIDITY<95% non-condensing
STORAGE TEMPERATURE-40°C to 60°C (-40°F to 140°F)



StructureScan Pro is a versatile concrete inspection system offering a wide variety of antenna options for concrete and other applications. Based on the SIR 4000 controller, the StructureScan Pro provides the GPR professional with solutions to any scanning situation.
$4,115.00
New GSSI StructureScan Mini LXT GPR - Sale !! (StructureScan Mini LXT)
StructureScan Mini LXT

GPR System for Concrete Inspection

The StructureScan Mini LXT is designed and built for the concrete contractor who needs to locate and mark targets. This rugged, handheld system is ideal for locating the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, voids and service utilities. The Mini LXT helps to reduce safety risks, financial exposure, and costly delays in concrete renovations.

MAX DEPTH
60 cm (24 in)

ANTENNA FREQUENCY
2700 MHz

WEIGHT
1.8 kg (4 lbs)

STORAGE CAPACITY
14.5 GB

OPTIONAL SOFTWARE
RADAN 7 for StructureScan Mini

ACCESSORIES
Extension pole

The StructureScan Mini LXT is typically used to:
  • Find rebar, post tension, conduits, and non-metallic objects
  • Measure slab thickness
  • Concrete scanning and imaging
  • Condition assessment
  • Structure inspection


INCLUDES :

StructureScan™ Mini LXT with 3D software
Lithium-ion battery (2)
Dual bay battery charger
Rugged transit case
Quick Start Guide
2-year warranty

Premium features, entry-level price
The StructureScan Mini LXT is the perfect blend of performance and price.
  • Locate with Confidence

    The Mini LXT incorporates integrated lasers on the front and sides to clearly and easily mark targets and clear coring locations. This system can quickly and reliably detect metallic and non-metallic targets in concrete, measure slab thickness and locate voids in depths of up to 60 cm (24 inches).

  • Enhanced Data Visualization

    Get first-in-class data visualization with a 6.5 inch HD touchscreen user interface and multiple operation modes including QuickScan for real-time locating at the push of a button, and 3D mode for x-ray like images of the concrete.

  • Safety & Ergonomics

    The StructureScan Mini LXT is compact and lightweight, weighing only 1.8 kg (4 lbs), making it easy to use on the ground or above-the-head on your job site. For large survey areas, add the optional extension pole for better ergonomics and ease of use.

    The Mini LXT allows the user to collect data with one-hand operation ensuring that while scanning on walls and ceilings with ladders or lifts, you maintain 3 points of contact to comply with OSHA regulations.


    Specifications
    DISPLAY6.5" Touchscreen LED
    DISPLAY MODESLinescan, Focus and 3D
    PORTUSB
    LANGUAGESEnglish, Spanish, Korean, Chinese, French
    OPERATING TEMPERATURE-4°F to 104°F (-20°C to 40°C)



The StructureScan Mini LXT is designed and built for the concrete contractor who needs to locate and mark targets. This rugged, handheld system is ideal for locating the position and depth of metallic and non-metallic objects in concrete structures, including rebar, conduit, post-tension cables, voids and service utilities. The Mini LXT helps to reduce safety risks, financial exposure, and costly delays in concrete renovations.
$3,150.00
New GSSI UtilityScan Pro GPR - Sale !! (UtilityScan Pro)
Utility Scan Pro

Industry Standard in GPR for Utility Mapping and Locating
With UtilityScan Pro, users can quickly identify and mark the position and depth of metallic and non-metallic objects; including utilities such as gas, communications and sewer lines as well as underground storage tanks and PVC pipes. Based on the SIR 4000 controller, the UtilityScan Pro provides the GPR professional with solutions to any underground locating situation.

MAX DEPTH
0-12 m (0-40 ft)

ANTENNA OPTIONS
400 MHz, 300/800 DF, 350 HS

WEIGHT
27.2-34 kg (60-75 lbs)
(cart dependent)

STORAGE CAPACITY
32 GB

OPTIONAL SOFTWARE
RADAN 7 for UtilityScan, RADAN 7

ACCESSORIES
LineTrac, Juniper Geode GPS, Tripod for 3-wheel survey cart

The UtilityScan Pro is typically used for:

Underground utility detection
Environmental remediation
Damage prevention
Geological investigation
Archaeology
Forensics
Road inspection

SYSTEM INCLUDES :

SIR 4000 Control Unit
400 MHz, 300/800 DF, or 350 HS Antenna
Choice of 3-wheel or 4-wheel cart
2 m control cable
SIR 4000 sunshade
SIR 4000 AC/DC power supply
Lithium-ion battery (2)
Dual-bay battery charger
Transit case
2-year warranty

Expect more from your GPR utility system
The UtilityScan Pro system provides a non-destructive means to accurately locate underground utilities and shallow geophysical characteristics.
  • UtilityScan Pro - Feature 1

    Fully Customizable System

    Users can customize the UtilityScan Pro with multiple antenna offerings and cart options. The tailored options provide survey flexibility, from smooth prepared surfaces to rugged terrain with our rugged four-wheel cart, and suit a number of utility locating applications.

  • UtilityScan Pro - Feature 2

    Mark with Confidence

    The UtilityScan Pro delivers exceptional data quality and is rugged enough to withstand the job site’s toughest conditions. Locate subsurface utilities with confidence.

  • UtilityScan Pro - Feature 3

    Data Visualization

    The UtilityScan Pro system features our state-of-the-art SIR 4000 controller and can incorporate an optional AC power accessory. The SIR 4000 controller incorporates advanced display modes and filtering capabilities for in-the-field processing and imaging. The LineTrac accessory for digital antennas adds the ability to detect AC power and induced RF energy present in buried utilities.


    Utility Scan Pro Specifications

    SYSTEMSIR 4000
    ANTENNASCompatible with all GSSI antennas
    NUMBER OF CHANNELSRecords data from 1 single-frequency antenna or 1 dual-frequency antenna
    DATA STORAGE32 GB Flash, 1 GB RAM
    DISPLAYEnhanced 10.4" LED display with internal high brightness, Active matrix 1024 x 768 resolution and 32-bit color
    GPSData logged internally
    DISPLAY MODESLinescan, Linescan plus O-scope, Wiggle trace Full 3D, 256 color bins are used to represent the amplitude and polarity of the signal
    ENVIRONMENTAL RATINGIP65
    DATA ACQUISITION
    DATA FORMATRADAN® (dzt)
    OUTPUT DATA FORMAT32-bit
    SCAN INTERVALUser-selectable, up to 4000 scans/sec
    NUMBER OF SAMPLES PER SCAN256, 512, 1024, 2048, 4096, 8192, 16384
    OPERATING MODESContinuous (time) or survey wheel (distance triggered) or point mode
    TIME RANGE0-20,000 nanoseconds full scale, user-selectable Gain: manual adjustment from -42 to 126 dB Number of segments in gain curve is user-selectable from 1 to 8
    STANDARD REAL-TIME FILTERSInfinite Impulse Response (IIR) - Low and High Pass, vertical and horizontal - Finite Impulse Response (FIR) - Low and High Pass, vertical and horizontal
    ADVANCED REAL-TIME FILTERSMigration, Surface Position Tracking, Signal Noise Floor Tracking, Adaptive Background Removal
    AUTOMATIC SYSTEM SETUPSStorage of an unlimited number of system setup files for different survey conditions and/or antenna deployment configurations
    AUTOMATIC ANTENNA RECOGNITIONAutomatic recognition of Smart Antennas to allow maximum compliant transmit rate
    LANGUAGESEnglish, Chinese, Japanese, French
    OPERATING
    OPERATING TEMPERATURE-20°C to 40°C external (-4°F to 104°F)
    BATTERYInspired Energy Ni2040ED, 3 hour runtime (battery life dependent on level of display brightness)
    TRANSMIT RATEUp to 800 KHz (International) US/Canada and CE rates depend on antenna model
    INPUT/OUTPUT
    AVAILABLE PORTSAntenna inputs analog and digital (one at a time), DC power input, Serial RS232 (GPS port), Accessory connector, HDMI video output, Ethernet to PC, USB 2.0 port, mini USB
    ETHERNETRJ45 100BT Ethernet
    USB HOSTUSB host with external keyboard support, USB flash drive support and USB HUB support
    MECHANICAL
    DIMENSIONS14x10x2.75 in (36x25x7 cm)
    WEIGHT10 lbs (4.53 kg) including battery
    RELATIVE HUMIDITY<95% non-condensing
    STORAGE TEMPERATURE-40°C to 60°C (-40°F to 140°F)



With UtilityScan Pro, users can quickly identify and mark the position and depth of metallic and non-metallic objects; including utilities such as gas, communications and sewer lines as well as underground storage tanks and PVC pipes. Based on the SIR 4000 controller, the UtilityScan Pro provides the GPR professional with solutions to any underground locating situation.
$6,300.00
New GSSI 1600 MHz – General Purpose Concrete Antenna - Sale !! (1600 MHz antenna)

The 1600 MHz antenna is a high-resolution, all-purpose antenna suitable for the inspection of concrete structures to locate/map rebar, post-tensioned tendons and conduits. It is typically used for general investigation works including floor slabs, walls, bridge decks and shallow void detection.

Specification
  • Centre Frequency: 1600 MHz
  • Penetration Depth: up to 500 mm (in concrete)
  • Uses: Rebar location/mapping, concrete investigation and shallow void detection
  • Manufactured by: GSSI
Uses

Typical applications for the 600 MHz antennae include:

  • Chimney flue location
  • Concrete floor slab surveys
  • Locating services and conduits in concrete slabs
  • Locating embedded metal in masonry
  • Locating Tendon Ducts in Post-Tensioned Concrete
  • Locating underfloor heating pipes
  • On-site rebar location and mark-up surveys
  • Rebar mapping and concrete imaging
  • Retaining wall surveys
  • Void location in construction and below slabs
  • Wall and slab thickness measurement
The 1600 MHz antenna is a high-resolution, all-purpose antenna suitable for the inspection of concrete structures to locate/map rebar, post-tensioned tendons and conduits. It is typically used for general investigation works including floor slabs, walls, bridge decks and shallow void detection.
$1,050.00
New GSSI 2000 MHz – Palm Antenna - Sale !! (2000 MHz – Palm Antenna)
The Palm Antenna offers users the ability to reach tightly spaced areas that were previously inaccessible such as corners, against walls and around obstructions. The antenna includes a dedicated survey wheel, a replaceable skid plate, and removable handle to reduce antenna height, if necessary. The Palm Antenna is compatible with the SIR 4000 and SIR 30 control units.
$1,175.00
New GSSI 2.3 GHz Palm XT Antenna - Sale !! (2.3 GHz Palm XT Antenna)
This 2300 MHz Palm XT antenna offers superior depth penetration and resolution. It features a full keypad control via the antenna top that provides remote control of the user interface. The antenna has seamless software integration with three data collection modes that provide the user with in-field options for data collection – Standard, Cross Polarization and Side Car. The antenna comes standard with a Multi-Positional Survey Wheel which allows users to quickly change between data collection modes. For Palm XT’s manufactured prior to August 2020 an Upgrade Kit is available. The Palm XT antenna is only compatible with the StructureScan Mini XT.

This 2300 MHz Palm XT antenna offers superior depth penetration and resolution. It features a full keypad control via the antenna top that provides remote control of the user interface.
$1,225.00
Per Page      1 - 15 of 15
  • 1