Olympus
Olympus Epoch 1000i Ultrasonic Flaw Detector
Upgradeable to Phased Array
The EPOCH® 1000, EPOCH 1000iR, and EPOCH 1000i provide advanced conventional ultrasound capabilities for both basic and advanced level users. These portable instruments can also be integrated into small systems for high-speed scanning and single-channel imaging and come standard with a host of high-performance features, including a 6 kHz maximum Pulse Repetition Frequency (PRF) with single-shot measurements for accurate high-speed scanning applications, tunable square wave pulser with PerfectSquare™ technology, and comprehensive digital filter sets for exceptional signal-to-noise clarity.
Features:
Adjustable pulse repetition frequency (PRF): 5 Hz to 6 kHz
Single-shot measurements in all standard modes
Tunable square wave pulser with PerfectSquare™ technology
Programmable analog and alarm outputs
Over 30 digital filter sets
Digital high dynamic range receiver
Specifications:
General Specifications
Overall dimensions: (W x H x D) 252 mm × 177 mm × 107 mm (9.92 in. × 6.97 in. × 4.2 in.)
Keypad: English, International, Japanese, Chinese
Languages: English, Spanish, French, German, Japanese, Chinese, Russian, Italian, Polish
Transducer connections BNC or Number 1 LEMO
Data storage :Onboard up to 10,000 IDs with waveform, standard 4 GB compact flash card (removable)
Battery type: Single lithium-ion rechargeable standard
Battery life: 8 hours (conventional UT mode); 7 hours (phased array mode)
Power requirements :AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
Standby mode :Adjustable from 15 minutes to 120 minutes with 50% less battery consumption
Display type: Full VGA (640 × 480 pixels) Transflective Color LCD, 60 Hz update rate
Display dimensions (W x H, Diag.): 132.5 mm × 99.4 mm, 165.1 mm (5.2 in. × 3.9 in., 6.5 in.)
Inputs/Outputs
USB ports: 1 USB Client, 3 USB Host ports
RS-232: Yes
Video output: VGA output standard
Analog output: 4 analog outputs, Selectable 1V/10V Full Scale, 4 mA max
Alarm output: 6 alarm outputs, 5V TTL, 10 mA
Trigger I/O: Trigger input 5V TTL; trigger output, 5 V TTL, 10 mA
Encoder inputs 2-axis encoder line (quadrature)
Environmental Ratings
IP rating: Designed to meet requirements of IP66
Explosive atmosphere: Tested to MIL-STD-810F, Method 511.4, Procedure 1. Atmosphere defined per NFPA 70, Article 500 as Class I, Division 2, Group D.
Shock tested: IEC 600689-2-27, 60 g’s, 6 µsec Half-Sine, 18 Axes total
Vibration tested: Sine vibration, IEC 60068-2-6, 5 Hz to 150 Hz @ 0.03 in. or 2 g’s Displacement Amplitude, 20 sweep cycles
Operating temperature: –10 °C to 50 °C (14 °F to 122 °F)
Battery Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F)
Battery Recharge temperature: 0 °C to 40 °C (32 °F to 104 °F)
Pulser
Pulser type: Tunable Square Wave
PRF: 5 Hz to 6,000 Hz in 5 Hz increments
Energy settings 50 V to 475 V in 25 V increments
Pulse width: Adjustable from 45 ns to 5,000 ns (0.1 MHz) with PerfectSquare Technology
Damping 50 Ω, 100 Ω, 200 Ω, 400 Ω
Pulser delay: Not applicable
Receiver
Gain: 0 to 110 dB
Maximum input signal: 20 Vp-p
Receiver input impedance: 400 Ω ± 5%
Receiver bandwidth: 0.2 MHz to 26.5 MHz @ –3 dB
Receiver delay NA
Digital filter settings Standard filter set (EN12668-1 Test & Compliant): 7 filters
Advanced filter set (not tested to EN12668-1): 30 filters
Rectification: Full wave, positive half wave, negative half wave, RF
Reject: 0 to 80% FSH with visual warning
Amplitude measurement: 0% to 110% full-screen height with 0.25% resolution
Measurement rate: Equivalent to PRF in all modes
Calibration
Automated calibration
• Velocity, Zero Offset
• Straight Beam (first back wall or echo-to-echo)
• Angle Beam (Soundpath or Depth)
Test modes: Pulse Echo, Dual, or Through Transmission
Units: Millimeters, inches, or microseconds
Range: 3.33 mm to 26,808 mm (0.131 in. to 1054.1 in.) at 5900 m/s (0.2320 in./µs)
Velocity: 635 to 15, 240 m/s (0.0250 to 0.6000 in./µs)
Zero offset: 0 µs to 750 µs
Display delay: –59 mm to 25,400 mm (–2.323 in. to 1000 in.)
Refracted angle 0° to 85° in 0.1° increments
Gates
Measurement gates: Two fully independent gates for amplitude and time-of-flight measurements
Measurement mode: Soundpath
Interface gate: Optional, with Gate 1 and Gate 2 tracking
Gate start: Variable over entire displayed range
Gate width: Variable from gate start to end of displayed range
Gate height: Variable from 2% to 95% full-screen height
Alarms
• Positive and negative threshold
• Minimum depth
Reference cursors: Two reference cursors for A-scans
Measurements
Displayed measurement: Six locations available (manual or auto selection)
Gate 1: Thickness, soundpath, projection, depth, amplitude, time-of-flight, min./max. depth, min./max. amplitude
Gate 2: Same as Gate 1
IF gate (Optional): Thickness
Echo-to-Echo: Standard. Choose between Gate2-1, Gate2-IF, and Gate1-IF
Other measurements: Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 rating (D), reject value
DAC/TVG: Standard
DAC points: Up to 50 points, 110 dB dynamic range
Special DAC modes: 20% to 80% DAC, Custom DAC (up to 6 curves)
TVG table: Up to 50 points, 110 dB dynamic range, compatible with IF Gate at all PRF settings
Curved surface correction: Standard. Tube or bar OD correction for angle beam measurements
Weight: 3.67 kg (8.1 lb), including lithium-ion battery
Olympus OmniScan SX Ultrasonic Flaw Detector
The Lightest and Most User-Friendly OmniScan
Olympus is proud to introduce the OmniScan SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.
The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan.
Setup
Inspection setup can be performed in NDT SetupBuilder, and imported directly, via SD card or USB key, to the OmniScan SX. Then, only a few basic operations are required in the instrument, such as setting the gate and range, before acquisition can begin. It is also very easy to create a setup right in the OmniScan SX, thanks to the following features:
- Automatic probe recognition.
- One-step, preconfigured application Wizard.
- Weld Overlay and RayTracing simulation
Calibration
To achieve a code-compliant inspection, the Calibration Wizard ensures that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector. The user is guided step-by-step through the required calibrations, including Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. Now, TOFD PCS calibration and lateral wave straightening can be performed automatically.
Acquisition
The OmniScan SX enables easy configuration of inspection parameters for either manual, one-line, or raster encoded scans. The acquisition is displayed in real time through user-selectable views and offers the ability to store data on a hot-swappable SD card or USB 2.0 device.
- Intelligent layouts
- Full-screen mode for better visualization of defects
- Synchronization and measurements can be processed using different gate combinations
Data Analysis and Reporting
- Data, reference, and measurement cursors for defect sizing
- Extensive readings database and predefined lists for trigonometry, flaw statistics on axes, volumetric position information, code-based acceptance criteria, corrosion mapping statistics, and more
- Views are linked for interactive analysis and automatically updated when performing off-line gate repositioning
- Optimized preconfigured layouts for quick and simple length, depth, and height sizing of flaws
Whether you prefer performing data analysis on a computer or simply wish to maximize the time your OmniScan is at work in the field, OmniPC or TomoView are the perfect software companions for your OmniScan.
Affordable and Portable Go a Long Way….
The Omniscan® SX provides Olympus with a new and versatile tool to add to its arsenal of innovative and creative complete market solutions aimed at simplifying your workflow and improving overall productivity.
Phased Array Weld Inspection
The OmniScan PA is at the heart of the manual and semiautomated phased array weld inspection solutions developed by Olympus for the oil and gas industry. These systems can be used for inspection in compliance with ASME, API, and other code criteria, while offering highspeed detection capabilities, and facilitating indication interpretation.
Corrosion Mapping and Composite Inspection
Zero-degree inspection just became even more accessible with the arrival of the OmniScan SX. For corrosion or composite inspection, Olympus offers field-proven solutions for detection of anomalies or wall loss.
TOFD Weld Inspection
TOFD is an easy and efficient approach for primary detection of weld defects. It is quick, cost-effective and capable of sizing defects present in the volume of the weld, a problematic area for manufacturing defects.
Component Inspection
Using ultrasonic techniques, inspection of components can detect cracks, wall loss, and other damage. With the capacity for both angle and linear zero-degree beams, the OmniScan SX is a very cost-efficient solution for this type of single-group inspection.
Features:
- Cost-efficient, single-group
- Two-axis encoding and data archiving capacity
- Conventional UT, TOFD, and 16:64PR PA capabilities
- 8.4 in. (21.3 cm) touch screen with OmniScan interface
- Compact, lightweight design
Specifications:
| Housing | |
| Overall dimensions (W x H x D) | 267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.) |
| Weight | 3.4 kg (7.5 lb) with battery |
| Data Storage | |
| Storage devices | SDHC card or most standard USB storage devices |
| Data file size | 300 MB |
| I/O Lines | |
| Encoder | 2-axis encoder line (quadrature, up, down, or clock/ direction) |
| Digital input | 4 digital TTL inputs, 5 V |
| Digital output | 3 digital outputs TTL, 5 V, 15 mA maximum per output |
| Acquisition on/off switch | Yes, through configuration of a digital input |
| Power output line | 5 V, 500 mA power output line (short-circuit protected) |
| Pace input | 5 V TTL pace input |
| Display | |
| Display size | 21.3 cm (8.4 in.) (diagonal) |
| Resolution | 800 pixels x 600 pixels |
| Brightness | 600 cd/m2 |
| Viewing angles | Horizontal: –80° to 80° Vertical: –60° to 80° |
| Number of colors | 16 million |
| Type | TFT LCD |
| Power Supply | |
| Battery type | Smart Li-ion battery |
| Number of batteries | 1 |
| Battery life | Minimum 6 hours under normal operating conditions |
| Environmental Specifications | |
| Operating temperature range | -10 °C to 45 °C (14 ºF to 113 ºF) |
| Storage temperature range | –20 °C to 60 °C (–4 ºF to 140 ºF) with battery –20 °C to 70 °C (–4 ºF to 158 ºF) without battery |
| Relative humidity | Max. 70% RH at 45°C noncondensing |
| Ingress protection rating | Designed to meet requirements of IP66 |
| Shockproof rating | Drop-tested according to MIL-STD-810G 516.6 |
| Ultrasound Specifications | |
| Connectors | 1 Phased Array connector: Olympus PA connector 2 UT connectors: LEMO 00 |
| Number of focal laws | 256 |
| Probe recognition | Automatic probe recognition |
| Pulser/Receiver | |
| Aperture | 16 elements |
| Number of elements | 64 elements |
| Pulser | |
| Voltage | 40 V, 80 V, and 115 V |
| Pulse width | Adjustable from 30 ns to 500 ns; resolution of 2.5 ns |
| Pulse shape | Negative square wave |
| Output impedance | 35 Ω (pulse-echo mode); 30 Ω (pitch- catch mode) |
| Receiver | |
| Gain | 0 dB to 80 dB, maximum input signal 550 mVp-p (full-screen height) |
| Input impedance | 60 Ω (pulse-echo mode); 150 Ω (pitch- catch mode) |
| System bandwidth | 0.6 MHz to 18 MHz (–3 dB) |
| Beamforming | |
| Scan type | Sectorial or linear |
| Group quantity | 1 |
| Data Acquisition | |
| Digitizing frequency | 400 MHz (12 bits) after interpolation per 5/4 |
| Maximum pulsing rate | Up to 6 kHz (C-scan) |
| Data Processing | |
| Number of data points | Up to 8,192 |
| Real-time averaging | PA: 2, 4, 8, 16 |
| Rectifier | RF, full wave, half wave , half wave – |
| Filtering | 3 low-pass, 3 band-pass, and 5 high-pass filters |
| Video filtering | Smoothing (adjusted to probe frequency range) |
| Data Visualization | |
| A-scan refresh rate | A-scan: 60 Hz; S-scan: 60 Hz |
| Data Synchronization | |
| On internal clock | 1 Hz to 6 kHz |
| On encoder | On 2 axes: from 1 to 65,536 steps |
| Programmable Time-Corrected Gain (TCG) | |
| Number of points | 16: One TCG (time-corrected gain) curve per focal law |
| Maximum slope | 40 dB/10 ns |
| Alarms | |
| Number of alarms | 3 |
| Conditions | Any logical combination of gates |
High Performance through Intuitive Operation
The BondMaster® 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.
The resolution and brightness of the 5.7-inch VGA screen on the BondMaster 600 handheld bond tester becomes even more apparent when switched into full-screen mode. Activated by the simple touch of a key, the full-screen mode is always accessible regardless of the display mode or inspection method you are using. The BondMaster 600 bond tester is programmed for a range of standard inspection methods, including pitch-catch RF, pitch-catch impulse, pitch-catch swept, resonance, as well as a notably improved mechanical impedance analysis (MIA) method.
 | Portable, Lightweight, and ErgonomicThe ergonomic design of the BondMaster 600 is convenient for difficult-to-access inspection locations. For inspection in tight spaces, the factory-installed hand strap provides maximum comfort while maintaining access to the most critical functions. |
Field Proven
The BondMaster 600’s case, based on a rugged, field-proven design, is world-renowned for withstanding the harshest, most demanding inspection conditions. The BondMaster 600 with its long battery life, airtight and water-resistant enclosure, high-friction bumpers, and dual-duty support stand/hook is a valuable tool for challenging inspection jobs.
Key Features
- Designed to meet the requirements of IP66.
- Long battery life (up to 9 hours).
- Compatible with existing BondMaster probes (PowerLink) and probes from other manufacturers.
- Bright, 5.7-inch color VGA display.
- Full-screen option in any display mode.
- Intuitive interface with application-specific presets.
- Instant display mode toggle using the RUN key.
- New SCAN view (profile).
- New SPECTRUM view and Frequency Tracking feature.
- Direct-access key gain adjustment.
- All-Settings configuration page screen.
- Up to two real-time readings.
- Storage capacity of up to 500 files (program and data).
- On-board file preview.
Two Models for Flexibility and Compatibility
The BondMaster 600 is offered in two models to accommodate the varying needs of composite bond testing. The basic model includes all pitch-catch capabilities, while the B600M model features all bond testing inspection methods. The upgrade from basic to multimode can also be performed remotely.
Both BondMaster 600 models are compatible with existing Olympus BondMaster probes, including those equipped with the PowerLink technology. Optional adaptor cables are available to enable compatibility with probes from other manufacturers.
| Application | Recommended Method |
| General Honeycomb Composites Skin-to-Core Disbonds | Pitch-Catch (RF or IMPULSE) |
| Honeycomb Composites Skin-to-Core Disbonds in Tapered Structures or Non-Constant Geometries | Pitch-Catch (Swept) |
| Smaller Skin-to-Core Disbonds in Honeycomb Composite | MIA |
| Identification or Repaired Areas in Honeycomb Composite | MIA |
| General Detection of Delamination in Composite | Resonance |
| Inspection of Metal-to-Metal Bonds | Resonance |
|
Specifications :
| General | Overall Dimensions (W × H × D) | 236 mm × 167 mm × 70 mm (9.3 in. × 6.57 in. × 2.76 in.) |
|---|---|---|
| Weight | 1.70 kg (3.75 lb), including lithium-ion battery | |
| Standards or Directives | Mil Standard 810G, CE, WEEE, FCC (USA), IC (Canada), RoHS (China), RCM (Australia and New Zealand), KCC (South Korea) | |
| Power Requirements | AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz | |
| Inputs and Outputs | One USB 2.0 peripheral port, one standard VGA analog output port, one 15-pin I/O port (male) with analog output, 3 alarm outputs. | |
| Environmental Conditions | Operating Temperature | –10 °C to 50 °C (50 °F to 122 °F) |
| Storage Temperature | 0 °C to 50 °C (32 °F to 122 °F) [with batteries] and -20 °C to 70 °C (-4 °F to 158 °F) [without batteries] | |
| IP Rating | Designed to meet requirements of IP66 | |
| Battery | Battery Type | Single lithium-ion rechargeable battery or AA size alkaline batteries (in an 8-cell holder). |
| Battery Life | Between 8 to 9 hours | |
| Display | Size (W × H; Diagonally) | 117.4 mm × 88.7 mm; 146.3 mm (4.62 in. × 3.49 in.; 5.76 in.) |
| Type | Full VGA (640 × 480 pixels) color, transflective LCD (liquid crystal display). | |
| Modes | Normal or Full screen, 8 color schemes. RUN key to toggle between screen modes. | |
| Grids and Display Tools | Choice of 5 grids, crosshairs (X-Y views only) | |
| Connectivity and Memory | PC Software | BondMaster PC software, included in base BondMaster 600 kit. BondMaster PC allows viewing saved files and printing reports. |
| Data Storage | 500 files featuring user-selectable on-board preview. | |
| Languages | English, Spanish, French, German, Italian, Japanese, Chinese, Russian, Portuguese, Polish, Dutch, Czech, Hungarian, Swedish, and Norwegian. | |
| Applications | Application Selection menu for easy and rapid configuration in all modes. | |
| Real-Time Readings | Choice of up to 2 real-time readings measuring signal characteristics (list depends on selected mode) | |
| Probes Types Supported | Probe Types | Pitch-Catch, Mechanical Impedance Analysis (MIA-B600M only) and Resonance probes (B600M only). The instrument is fully compatible with BondMaster PowerLink and non-PowerLink probes, as well as those of other main probe and accessory suppliers. |
| Bond Testing Specifications (All BondMaster Models) | Probe Connectors | 11-pin Fischer |
| Gain* | 0 dB to 100 dB in 0.1 or 1 dB increments | |
| Rotation* | 0° to 359.9° in 0.1° or 1° increments | |
| Scan View* | Variable from 0.520 s to 40 s | |
| Low Pass Filter* | 6 Hz to 300 Hz | |
| Probe Drive | LOW, MEDIUM, and HIGH user-adjustable settings | |
| Variable Persistence* | 0.1 s to 10 s | |
| Variable Display Erase* | 0.1 s to 60 s | |
| Available Alarm Types* | 3 simultaneous alarms. Choices include BOX (rectangle), POLAR (circle), SECTOR (pie), SCAN (time-based), and SPECTRUM (frequency response). | |
| Reference Dots* | Up to 25 user-defined dot recordings | |
| Pitch-Catch Specifications (All B600 Models) | Supported pitch-catch modes | User-selectable mode. Choice of RF (toneburst), Impulse (envelope) or Swept (frequency sweep) |
| Frequency Range | 1 kHz to 50 kHz (RF, Impulse) or 1 kHz to 100 kHz (Swept) | |
| Gain | 0 dB to 70 dB in 0.1 or 1 dB increments | |
| Gate | 10 μs to 7920 μs, adjustable in 10 μs steps. New Auto Gate mode automatically detects maximum amplitude. | |
| Frequency Tracking* | Up to 2 user-adjustable markers to monitor 2 specific frequencies from the Swept figure. | |
| Mechanical Impedance Analysis (MIA) Specifications (B600M Only) | Calibration Wizard | Calibration menu to determine best frequency for application, based on simple “BAD PART” and “GOOD PART” measurements |
| Frequency Range | 2 kHz to 50 kHz | |
| Calibration Wizard | Calibration menu to determine best frequency based on the probe response |
If you work in explosive atmospheres, the BondMaster 600 Ex bond tester conforms to the requirements of the ATEX directive.
Standard Inclusions
The BondMaster® 600 is available in any of the following configurations:
Model: Basic and Multi-mode (M) .
Power cord: Over 11 power cord models available (for the DC charger).
Keypad and instruction label: English, international (icons), Chinese, or Japanese.
“Getting Started” print manual: over 9 languages available.
Items included in all BondMaster 600 models†: BondMaster 600 instrument with factory-installed hand strap, getting started manual, calibration certificate, rigid transport case, DC charger with power cord, Li-ion battery, AA battery tray, USB communication cable, MicroSD memory card and adaptor, Pitch-catch and MIA probe cable, and BondMaster PC software and product manuals disc.
†Standard inclusions may vary depending on your location. Contact your local distributor.
Additional items included in BondMaster 600M model only: Resonance probe cable.
Also you can check : Used Olympus BondMaster 600M ( MultiMode ) Bondtester - Sale !!
The EPOCH 600 is mid-level, handheld ultrasonic flaw detector. Weighing only 1.68 kg (3.72 lb.), its horizontal case is built to withstand the rigors of very harsh environments. EN12668-1 plus features such as 400 V PerfectSquare tunable square wave pulser, digital filtering for enhanced signal-to-noise ratio.
The EPOCH 600 Digital Ultrasonic Flaw Detector combines Olympus' industry leading conventional flaw detection capabilities with the efficiency of a highly portable, intuitive instrument. The EPOCH 600 flaw detector's blend of efficient menus and direct access keys allows you to take advantage of the highest quality flaw detection platform with exceptional ease of use.
The large, full VGA transflective display combined with our patent-pending digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. Available in two hardware configurations, the EPOCH 600 offers you the choice to adjust parameters with a knob or with a navigation area on the keypad. The EPOCH 600 is designed to meet the requirements of EN12668-1 and allows a full range of standard and optional flaw detection features. The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare pulser and digital filtering capabilities can tackle nearly any application.
Key Features
- Designed to meet the requirements of EN12668-1
- PerfectSquare™ tunable square wave pulser
- Digital high dynamic range receiver
- Eight digital filters for enhanced signal-to-noise ratio
- 2 kHz PRF for rapid scanning
- Knob or navigation pad adjustment configurations
- Large, full VGA sunlight readable display
- Long battery life, supporting lithium-ion or alkaline batteries
- Standard dynamic DAC/TVG and onboard DGS/AVG
- 2 GB MicroSD memory card for data transfers and storage
- USB On-The-Go (OTG) for PC communication
- Alarm and VGA outputs
- Optional analog output
Included:
Olympus Epoch 600 unit
Charging dock for battery
AC Adapter/Charger
Power cord for charger
User Documents
Hard carrying case
The Nortec 500 improves on previous Nortec eddy current instruments and is available in four configurations. Each configuration includes a USB port and increased resolution with reduced noise. Internal balance coils allow use of inexpensive absolute probes without the need or external balance coil adapters. A builtin preamp adds extra gain when needed for difficult tests. VGA output allows for the display to be projected or viewed on a standard computer screen. The optional remote-null adapter adds convenience by allowing the probe to be nulled and the instrument screen erased from the probe.
Where weight is critical, the smaller battery lightens the instrument to 1.2 kg (2.8 lbs) while keeping the full VGA resolution and display size.
Features:
50 Hz to 12 MHz frequency range
Preamplifier (0 or 14 dB)
Single Li-Ion battery, choice of two battery configurations: 2.4 Ahr or 8.8 Ahr
Lightweight, 1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs) depending on battery configuration
165 mm (6.5 in.) full VGA color LCD (640 x 480 resolution)
On-board storage of up to 200 programs
On-screen reference memory for go/no go applications
Internal balance loads for single coil probe support
Display Freeze to hold flaw signals
PowerLink technology – automatic probe recognition and instrument set-up
Foreign Object Debris (FOD) free case design
VGA output
GENERAL
Dimensions
(W x H x D)216 mm x 140 mm x 61 mm (8.5 in. x 5.5 in. x 2.4 in
Weight
1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs), depending upon configuration
Display
133 mm x 99 mm, 165 mm diagonal (5.25 in. x 3.9 in., 6.5 in.) full VGA color LCD (640 x 480 pixels)
Operating temperature
–10 ºC to 55 ºC (14 ºF to 122 ºF)
Humidity
5% to 95%
Classification
Based on Class 2 specifications from the MIL-PRF-28800F handbook
Altitude
Maximum operating and non-operating altitude – 4600 m (15,000 ft)
Hazardous area operation
Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1
Probe types
Absolute and differential in either bridge or reflection configuration. The instrument is fully compatible with Nortec PowerLink probes.
Alarms
Can be set to trigger on positive or negative box, polar, or sweep alarm settings
Alarm modes
1 to 3 box gates, polar, sweep, conductivity, and coating thickness
Trace storage
Up to 200 traces can be stored for recall. The traces can be static or frozen and can contain up to 60 seconds of movement. The traces are stored with the date and time of capture.
Program storage
Up to 200 instrument set-ups may be stored and recalled. The date and time of storage is recorded with each set-up.
Print out
Provides a custom configurable report header containing the display screen data and probe parameters including serial numbers (PowerLink probes only)
MEASUREMENT
Frequency range
50 Hz to 12 MHz
Gain
0 dB to 90 dB in 0.1 dB steps. The horizontal and vertical gains may be adjusted separately or together.
Rotation
Variable 0º to 359º in 1º steps
Sweep
Variable from 0.005 s to 4 s per division
Low Pass filter
10 Hz to 500 Hz and wide band
High Pass filter
Off or 2.0 Hz to 500 Hz, 2 pole response
Built-in preamplifier
5X (14 dB) additional gain.
Probe drive
2 volts, 6 volts, 12 volts
Variable persistence
0.1 s to 5 s
INPUTS/OUTPUTS
Power
2-pin connector to charge the internal batteries and operate the instrument from AC power
USB port
Allows interface with PC and printers
Probe connector
16-pin LEMO and BNC
Analog outputs
Horizontal and vertical outputs of both F1 and F2. /– 5 V, 1 V per division (four outputs)
Alarm outputs
15-pin analog and alarm output connector
VGA output
15-pin connector
POWER
Power requirements
85 V to 240 V, 50 Hz to 60 Hz. Battery can be
charged within the instrument or in an external charger. Charge typically takes 4 hours.
Available batteries
2.4 Ahr Li-ion or 8.8 Ahr Li-ion
Low battery protection
Display bar graph “gas gauge” indicates approximate operating time. A low battery annunciator indicates when approximately 10 minutes of operation time is left.
Battery operating time
3 to 8 hours nominal depending on configuration and scanner usage
Configurations of the Olympus Nortec 500:
The Olympus Nortec 500 delivers basic single frequency eddy current inspection including external outputs.
The Olympus Nortec 500C adds digital conductivity and coating thickness measurement capability in addition to basic single frequency eddy current inspection.
The Olympus Nortec 500S builds on the foundation of the N500C and adds the ability to use rotating scanners.
The Olympus Nortec 500D adds dual frequency capabilities to all the functions of the N500S.
Includes :
-Operation manual-Cable box(2 USB cables, CL/SC/6)-N500D Instrument-Power supply/charger-Instrument carry case-Eddy master software CD-Power Cord-Certificate of calibration
Also you can check : Used Olympus Nortec 600D Eddy Current Flaw Detector - Sale !!
