Used Olympus Nortec 500D Eddy Current Flaw Detector - Sale !!

The Nortec 500 improves on previous Nortec eddy current instruments and is available in four configurations. Each configuration includes a USB port and increased resolution with reduced noise. Internal balance coils allow use of inexpensive absolute probes without the need or external balance coil adapters. A builtin preamp adds extra gain when needed for difficult tests. VGA output allows for the display to be projected or viewed on a standard computer screen. The optional remote-null adapter adds convenience by allowing the probe to be nulled and the instrument screen erased from the probe.
$1,280.00
Qty:
The Olympus Nortec 500 Series eddy current flaw detectors incorporate a full range of features: internal balance coils, VGA output connector (for heads up displays, monitors, and projectors), and a USB interface for rapid information transfer. The Olympus Nortec 500 also includes PowerLink, for automatic probe recognition and program set-up.

The Nortec 500 improves on previous Nortec eddy current instruments and is available in four configurations. Each configuration includes a USB port and increased resolution with reduced noise. Internal balance coils allow use of inexpensive absolute probes without the need or external balance coil adapters. A builtin preamp adds extra gain when needed for difficult tests. VGA output allows for the display to be projected or viewed on a standard computer screen. The optional remote-null adapter adds convenience by allowing the probe to be nulled and the instrument screen erased from the probe.

Where weight is critical, the smaller battery lightens the instrument to 1.2 kg (2.8 lbs) while keeping the full VGA resolution and display size.

Features:

50 Hz to 12 MHz frequency range
Preamplifier (0 or 14 dB)
Single Li-Ion battery, choice of two battery configurations: 2.4 Ahr or 8.8 Ahr
Lightweight, 1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs) depending on battery configuration
165 mm (6.5 in.) full VGA color LCD (640 x 480 resolution)
On-board storage of up to 200 programs
On-screen reference memory for go/no go applications
Internal balance loads for single coil probe support
Display Freeze to hold flaw signals
PowerLink technology – automatic probe recognition and instrument set-up
Foreign Object Debris (FOD) free case design
VGA output

GENERAL

Dimensions 
(W x H x D)216 mm x 140 mm x 61 mm (8.5 in. x 5.5 in. x 2.4 in
Weight
1.2 kg to 1.7 kg (2.8 lbs to 3.8 lbs), depending upon configuration
Display
133 mm x 99 mm, 165 mm diagonal (5.25 in. x 3.9 in., 6.5 in.) full VGA color LCD (640 x 480 pixels)
Operating temperature
–10 ºC to 55 ºC (14 ºF to 122 ºF)
Humidity
5% to 95%
Classification
Based on Class 2 specifications from the MIL-PRF-28800F handbook
Altitude
Maximum operating and non-operating altitude – 4600 m (15,000 ft)
Hazardous area operation
Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1
Probe types
Absolute and differential in either bridge or reflection configuration. The instrument is fully compatible with Nortec PowerLink probes.
Alarms
Can be set to trigger on positive or negative box, polar, or sweep alarm settings
Alarm modes
1 to 3 box gates, polar, sweep, conductivity, and coating thickness
Trace storage
Up to 200 traces can be stored for recall. The traces can be static or frozen and can contain up to 60 seconds of movement. The traces are stored with the date and time of capture.
Program storage
Up to 200 instrument set-ups may be stored and recalled. The date and time of storage is recorded with each set-up.
Print out
Provides a custom configurable report header containing the display screen data and probe parameters including serial numbers (PowerLink probes only)

MEASUREMENT

Frequency range
50 Hz to 12 MHz
Gain
0 dB to 90 dB in 0.1 dB steps. The horizontal and vertical gains may be adjusted separately or together.
Rotation
Variable 0º to 359º in 1º steps
Sweep
Variable from 0.005 s to 4 s per division
Low Pass filter
10 Hz to 500 Hz and wide band
High Pass filter
Off or 2.0 Hz to 500 Hz, 2 pole response
Built-in preamplifier
5X (14 dB) additional gain.
Probe drive
2 volts, 6 volts, 12 volts
Variable persistence
0.1 s to 5 s

INPUTS/OUTPUTS

Power
2-pin connector to charge the internal batteries and operate the instrument from AC power
USB port
Allows interface with PC and printers
Probe connector
16-pin LEMO and BNC
Analog outputs
Horizontal and vertical outputs of both F1 and F2. /– 5 V, 1 V per division (four outputs)
Alarm outputs
15-pin analog and alarm output connector
VGA output
15-pin connector

POWER

Power requirements
85 V to 240 V, 50 Hz to 60 Hz. Battery can be
charged within the instrument or in an external charger. Charge typically takes 4 hours.
Available batteries
2.4 Ahr Li-ion or 8.8 Ahr Li-ion
Low battery protection
Display bar graph “gas gauge” indicates approximate operating time. A low battery annunciator indicates when approximately 10 minutes of operation time is left.
Battery operating time
3 to 8 hours nominal depending on configuration and scanner usage

Configurations of the Olympus Nortec 500:

The Olympus Nortec 500 delivers basic single frequency eddy current inspection including external outputs.
The Olympus Nortec 500C adds digital conductivity and coating thickness measurement capability in addition to basic single frequency eddy current inspection.

The Olympus Nortec 500S builds on the foundation of the N500C and adds the ability to use rotating scanners.
The Olympus Nortec 500D adds dual frequency capabilities to all the functions of the N500S.

Includes :

-Operation manual-Cable box(2 USB cables, CL/SC/6)-N500D Instrument-Power supply/charger-Instrument carry case-Eddy master software CD-Power Cord-Certificate of calibration

Also you can check : Used Olympus Nortec 600D Eddy Current Flaw Detector - Sale !!

  • Availability: 26 In Stock
  • Model: Nortec 500D
  • Brand: Olympus

Write Review

Note: Do not use HTML in the text.

Brands List

  • API
  • Artec3D
  • BRUKER
  • CREAFORM
  • Easy-Laser
  • FARO
  • Fixturlaser
  • GE Inspection Technologies
  • GEOSLAM
  • GSSI
  • Hitachi
  • Leica Geosystem
  • MALA
  • NDT System
  • Olympus
  • Proceq
  • PRUFTECHNIK
  • Radiodetection
  • SciAps
  • Sensors and Software
  • SKF
  • Sonatest
  • Thermo Fisher Scientific
  • Trimble
  • US Radar Inc
  • Waygate Krautkrämer
  • ZETEC